Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
San Shing FastechTPE:5007 83 5-Year Yield-on-Cost % is 8.44 as of Aug. 05, 2026, which is 1% below its 10-year median of 8.52. GuruFocus rates TPE:5007 with a GF Score™ of 83/100 and a GF Value™ of NT$49.24 (Modestly Overvalued). The stock has 5 warning signs investors should review. Among 1,912 Industrial Products companies, San Shing Fastech ranks better than 88.65% on this metric.
San Shing Fastech's yield on cost for the quarter that ended in Mar. 2026 was 8.44.
The historical rank and industry rank for San Shing Fastech's 5-Year Yield-on-Cost % or its related term are showing as below:
TPE:5007'
s 5-Year Yield-on-Cost % Range Over the Past 10 Years
Min: 4.92 Med: 8.52 Max: 18.44
Current: 8.44
During the past 13 years, San Shing Fastech's highest Yield on Cost was 18.44. The lowest was 4.92. And the median was 8.52.
TPE:5007's 5-Year Yield-on-Cost % is ranked better than 88.65% of 1912
companies
in the Industrial Products industry
Industry Median: 1.94
vs TPE:5007: 8.44
San Shing Fastech (TPE:5007) 5-Year Yield-on-Cost % Explanation
Of course the risk here is that the company may not raise its dividends as it did before. The key is to select the companies that can consistently raise its dividends. Usually companies with long history of raising dividends tend to do so.
San Shing Fastech 5-Year Yield-on-Cost % Related Terms
TPE:5007 vs SNA, RBC, SWK: 5-Year Yield-on-Cost % Comparison
For the Tools & Accessories subindustry, San Shing Fastech's 5-Year Yield-on-Cost %, along with its competitors' market caps and 5-Year Yield-on-Cost % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
San Shing Fastech 5-Year Yield-on-Cost % vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, San Shing Fastech's 5-Year Yield-on-Cost % distribution charts can be found below:
* The bar in red indicates where San Shing Fastech's 5-Year Yield-on-Cost % falls into.
San Shing Fastech 5-Year Yield-on-Cost % Calculation
Dividend Yield % and dividend growth of a stock is an important factor for income investors. But if company A raises its dividend constantly faster than company B, company A's future dividend yield might be much higher than Company B's even if their yields are the same now and their stock prices do not change.
Yield on Cost assumes that you buy and the stock today, and hold it for 5 years. If the company raises it dividends at the same rate as it did over the past 5 years, the dividends investors receive annually in 5 years relative to the stock price today.
San Shing Fastech (TPE:5007) has a 5-Year Yield-on-Cost % of 8.44 as of Aug. 05, 2026. 5-Year Yield on Cost measures the expected yield based on a company's current yield and 5-year dividend growth. View historical data on San Shing Fastech and its competitors. This is near median its historical median of 8.52. Over the past decade, San Shing Fastech's 5-Year Yield-on-Cost % has ranged from 4.92 to 18.44. According to the industry distribution chart, San Shing Fastech ranks #217 out of 1912 companies in the Industrial Products industry, placing it in the top 11.3%.
Is San Shing Fastech's 5-Year Yield-on-Cost % too high?
San Shing Fastech's current 5-Year Yield-on-Cost % of 8.44 is near median its 10-year median of 8.52. Over the past 10 years, this metric has ranged from a low of 4.92 to a high of 18.44. The Industrial Products industry median 5-Year Yield-on-Cost % is 1.94. San Shing Fastech's value of 8.44 is 335.1% above this industry median. Based on the distribution chart, San Shing Fastech ranks #217 out of 1912 companies in the Industrial Products industry, which is in the top quartile — a strong position relative to peers. Overall, San Shing Fastech has a GF Score™ of 83/100 and is considered Modestly Overvalued, reflecting its overall financial health beyond just this single metric.
How does San Shing Fastech's 5-Year Yield-on-Cost % compare to SNA and RBC?
According to the Industrial Products industry distribution chart, San Shing Fastech ranks #217 out of 1912 companies for 5-Year Yield-on-Cost %. This places San Shing Fastech in the top 11% of its industry — outperforming the majority of peers. The industry median 5-Year Yield-on-Cost % is 1.94. San Shing Fastech's value of 8.44 is 335.1% above this benchmark. Historically, San Shing Fastech's own 5-Year Yield-on-Cost % has ranged from 4.92 to 18.44 over the past decade. While the company's 10-year median is 8.52 vs. the industry median of 1.94, San Shing Fastech has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good 5-Year Yield-on-Cost % for an Industrial Products company?
The median 5-Year Yield-on-Cost % among Industrial Products companies is 1.94, based on 1,912 companies in the industry. Companies in the top quartile (top 25%) have a 5-Year Yield-on-Cost % significantly above this median, while those in the bottom quartile fall well below. However, 5-Year Yield-on-Cost % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. San Shing Fastech's current 5-Year Yield-on-Cost % of 8.44 is 335.1% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high 5-Year Yield-on-Cost % mean?
A high 5-Year Yield-on-Cost % can signal that a stock is expensive relative to its fundamentals. 5-Year Yield on Cost measures the expected yield based on a company's current yield and 5-year dividend growth. View historical data on San Shing Fastech and its competitors. For the Industrial Products industry, the median 5-Year Yield-on-Cost % is 1.94 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. San Shing Fastech's current 5-Year Yield-on-Cost % is 8.44, which is near median its own 10-year median of 8.52. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is San Shing Fastech stock overvalued right now?
Based on GuruFocus' analysis, San Shing Fastech (TPE:5007) is currently considered Modestly Overvalued. The stock's GF Value™ is NT$49.24, compared to a current price of NT$56.50 — trading 14.7% above its estimated fair value. The current 5-Year Yield-on-Cost % is 8.44, which is near median its 10-year median of 8.52 and 335.1% above the Industrial Products industry median of 1.94. San Shing Fastech's overall GF Score™ is 83/100 with 5 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is 5-Year Yield-on-Cost % calculated?
5-Year Yield-on-Cost % is calculated from a company's financial statements. For San Shing Fastech (TPE:5007), the current 5-Year Yield-on-Cost % is 8.44 as of Aug. 05, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is San Shing Fastech (TPE:5007) Overvalued in 2026?
Based on GuruFocus' analysis, San Shing Fastech stock appears to be overvalued.
The current stock price of NT$56.50 is trading 14.7% above its estimated GF Value™ of NT$49.24.
GuruFocus considers San Shing Fastech to be Modestly Overvalued.
Key valuation signals for TPE:5007:
5-Year Yield-on-Cost %: 8.44 (near median its 10-year median of 8.52)
GF Value™: NT$49.24 vs. price of NT$56.50 (14.7% above fair value)
Industry Position: 335.1% above the Industrial Products median (#217 of 1912)
No single metric tells the full story. See the TPE:5007 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
San Shing Fastech Corp is engaged in the manufacturing, processing, marketing, and export of bolts, nuts, steel wires, related machinery, machinery parts, and tools. Its products include nuts, bolts (screws), washers, wire, machinery, and tooling. The Company operates through the Fastener Segment, Machine / Tooling Segment, and Other Operation Segment. The Fastener Segment, which generates maximum revenue, focuses on manufacturing and marketing of bolts, nuts, and washers, processing of wires, and heat treatment. The Machine / Tooling Segment focuses on manufacturing and marketing of toolings and machines, while the Other Operation Segment focuses on marketing of wires, investments, and other financial income and expenditure activities.
83GF Score
Get the complete analysis for TPE:5007
5-Year Yield-on-Cost % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TPE:5007 has been successfully added to your 
