Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Dai-Ichi Cutter Kogyo KKTSE:1716 71 EBITDA Margin % is 21.86% as of Dec. 2025, which is 34% above its 10-year median of 16.36. GuruFocus rates TSE:1716 with a GF Score™ of 71/100 and a GF Value™ of 円1,333.14 (Fairly Valued). The stock has 4 warning signs investors should review. Among 1,769 Construction companies, Dai-Ichi Cutter Kogyo KK ranks better than 80.67% on this metric.
Dai-Ichi Cutter Kogyo KK (TSE:1716) EBITDA Margin % Explanation
EBITDA Margin % is the ratio of EBITDA divided by net sales or Revenue. It is an performance metric measuring company's operating profitability. EBITDA Margin takes depreciation and amortization, interest expense and tax into account, which makes it easy to compare the relative profitability of companies of different sizes in the same industry.
Dai-Ichi Cutter Kogyo KK EBITDA Margin % Related Terms
Dai-Ichi Cutter Kogyo KK EBITDA Margin % Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
TSE:1716 vs PWR, FIX, EME: EBITDA Margin % Comparison
For the Engineering & Construction subindustry, Dai-Ichi Cutter Kogyo KK's EBITDA Margin %, along with its competitors' market caps and EBITDA Margin % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Dai-Ichi Cutter Kogyo KK EBITDA Margin % vs Construction Industry
For the Construction industry and Industrials sector, Dai-Ichi Cutter Kogyo KK's EBITDA Margin % distribution charts can be found below:
* The bar in red indicates where Dai-Ichi Cutter Kogyo KK's EBITDA Margin % falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Dai-Ichi Cutter Kogyo KK (TSE:1716) has a EBITDA Margin % of 21.86% as of Dec. 2025. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on Dai-Ichi Cutter Kogyo KK and its competitors. This is 34% above median its historical median of 16.36. Over the past decade, Dai-Ichi Cutter Kogyo KK's EBITDA Margin % has ranged from 13.37 to 18.56. According to the industry distribution chart, Dai-Ichi Cutter Kogyo KK ranks #342 out of 1769 companies in the Construction industry, placing it in the top 19.3%.
Is Dai-Ichi Cutter Kogyo KK's EBITDA Margin % too high?
Dai-Ichi Cutter Kogyo KK's current EBITDA Margin % of 21.86% is 34% above median its 10-year median of 16.36. Over the past 10 years, this metric has ranged from a low of 13.37 to a high of 18.56. The Construction industry median EBITDA Margin % is 9.12. Dai-Ichi Cutter Kogyo KK's value of 21.86% is 139.7% above this industry median. Based on the distribution chart, Dai-Ichi Cutter Kogyo KK ranks #342 out of 1769 companies in the Construction industry, which is in the top quartile — a strong position relative to peers. Overall, Dai-Ichi Cutter Kogyo KK has a GF Score™ of 71/100 and is considered Fairly Valued, reflecting its overall financial health beyond just this single metric.
How does Dai-Ichi Cutter Kogyo KK's EBITDA Margin % compare to PWR and FIX?
According to the Construction industry distribution chart, Dai-Ichi Cutter Kogyo KK ranks #342 out of 1769 companies for EBITDA Margin %. This places Dai-Ichi Cutter Kogyo KK in the top 19% of its industry — outperforming the majority of peers. The industry median EBITDA Margin % is 9.12. Dai-Ichi Cutter Kogyo KK's value of 21.86% is 139.7% above this benchmark. Historically, Dai-Ichi Cutter Kogyo KK's own EBITDA Margin % has ranged from 13.37 to 18.56 over the past decade. While the company's 10-year median is 16.36 vs. the industry median of 9.12, Dai-Ichi Cutter Kogyo KK has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good EBITDA Margin % for a Construction company?
The median EBITDA Margin % among Construction companies is 9.12, based on 1,769 companies in the industry. Companies in the top quartile (top 25%) have a EBITDA Margin % significantly above this median, while those in the bottom quartile fall well below. However, EBITDA Margin % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Dai-Ichi Cutter Kogyo KK's current EBITDA Margin % of 21.86% is 139.7% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high EBITDA Margin % mean?
A high EBITDA Margin % can signal that a stock is expensive relative to its fundamentals. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on Dai-Ichi Cutter Kogyo KK and its competitors. For the Construction industry, the median EBITDA Margin % is 9.12 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Dai-Ichi Cutter Kogyo KK's current EBITDA Margin % is 21.86%, which is 34% above median its own 10-year median of 16.36. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Dai-Ichi Cutter Kogyo KK stock overvalued right now?
Based on GuruFocus' analysis, Dai-Ichi Cutter Kogyo KK (TSE:1716) is currently considered Fairly Valued. The stock's GF Value™ is 円1,333.14, compared to a current price of 円1,410.00 — trading 5.8% above its estimated fair value. The current EBITDA Margin % is 21.86%, which is 34% above median its 10-year median of 16.36 and 139.7% above the Construction industry median of 9.12. Dai-Ichi Cutter Kogyo KK's overall GF Score™ is 71/100 with 4 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is EBITDA Margin % calculated?
EBITDA Margin % is calculated from a company's financial statements. For Dai-Ichi Cutter Kogyo KK (TSE:1716), the current EBITDA Margin % is 21.86% as of Dec. 2025. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Dai-Ichi Cutter Kogyo KK (TSE:1716) Overvalued in 2026?
Based on GuruFocus' analysis, Dai-Ichi Cutter Kogyo KK stock appears to be overvalued.
The current stock price of 円1,410.00 is trading 5.8% above its estimated GF Value™ of 円1,333.14.
GuruFocus considers Dai-Ichi Cutter Kogyo KK to be Fairly Valued.
Key valuation signals for TSE:1716:
EBITDA Margin %: 21.86% (34% above median its 10-year median of 16.36)
GF Value™: 円1,333.14 vs. price of 円1,410.00 (5.8% above fair value)
Industry Position: 139.7% above the Construction median (#342 of 1769)
No single metric tells the full story. See the TSE:1716 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Dai-Ichi Cutter Kogyo KK operates in the construction industry. It performs cutting, drilling, and surface polishing works for asphalt and concrete infrastructures. It also provides washing works for production facilities. The company's business division includes Cutting and drilling work business, Building maintenance business, and Reuse and recycling business. The company generates the majority of its revenue from Cutting and drilling work business.
71GF Score
Get the complete analysis for TSE:1716
EBITDA Margin % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TSE:1716 has been successfully added to your 
