Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Dai-Ichi Cutter Kogyo KKTSE:1716 +0.40%71 5-Year Yield-on-Cost % is 9.76 as of Aug. 16, 2026, which is 127% above its 10-year median of 4.30. GuruFocus rates TSE:1716 with a GF Score™ of 71/100 and a GF Value™ of 円1,332.12 (Modestly Overvalued). The stock has 6 warning signs investors should review. Among 1,006 Construction companies, Dai-Ichi Cutter Kogyo KK ranks better than 85.59% on this metric.
Dai-Ichi Cutter Kogyo KK (TSE:1716) 5-Year Yield-on-Cost % Explanation
Of course the risk here is that the company may not raise its dividends as it did before. The key is to select the companies that can consistently raise its dividends. Usually companies with long history of raising dividends tend to do so.
Dai-Ichi Cutter Kogyo KK 5-Year Yield-on-Cost % Related Terms
TSE:1716 vs PWR, FIX, EME: 5-Year Yield-on-Cost % Comparison
For the Engineering & Construction subindustry, Dai-Ichi Cutter Kogyo KK's 5-Year Yield-on-Cost %, along with its competitors' market caps and 5-Year Yield-on-Cost % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Dai-Ichi Cutter Kogyo KK 5-Year Yield-on-Cost % vs Construction Industry
For the Construction industry and Industrials sector, Dai-Ichi Cutter Kogyo KK's 5-Year Yield-on-Cost % distribution charts can be found below:
* The bar in red indicates where Dai-Ichi Cutter Kogyo KK's 5-Year Yield-on-Cost % falls into.
Dai-Ichi Cutter Kogyo KK 5-Year Yield-on-Cost % Calculation
Dividend Yield % and dividend growth of a stock is an important factor for income investors. But if company A raises its dividend constantly faster than company B, company A's future dividend yield might be much higher than Company B's even if their yields are the same now and their stock prices do not change.
Yield on Cost assumes that you buy and the stock today, and hold it for 5 years. If the company raises it dividends at the same rate as it did over the past 5 years, the dividends investors receive annually in 5 years relative to the stock price today.
Dai-Ichi Cutter Kogyo KK (TSE:1716) has a 5-Year Yield-on-Cost % of 9.76 as of Aug. 16, 2026. 5-Year Yield on Cost measures the expected yield based on a company's current yield and 5-year dividend growth. View historical data on Dai-Ichi Cutter Kogyo KK and its competitors. This is 127% above median its historical median of 4.30. Over the past decade, Dai-Ichi Cutter Kogyo KK's 5-Year Yield-on-Cost % has ranged from 1.42 to 11.40. According to the industry distribution chart, Dai-Ichi Cutter Kogyo KK ranks #145 out of 1006 companies in the Construction industry, placing it in the top 14.4%.
Is Dai-Ichi Cutter Kogyo KK's 5-Year Yield-on-Cost % too high?
Dai-Ichi Cutter Kogyo KK's current 5-Year Yield-on-Cost % of 9.76 is 127% above median its 10-year median of 4.30. Over the past 10 years, this metric has ranged from a low of 1.42 to a high of 11.40. The Construction industry median 5-Year Yield-on-Cost % is 3.46. Dai-Ichi Cutter Kogyo KK's value of 9.76 is 182.1% above this industry median. Based on the distribution chart, Dai-Ichi Cutter Kogyo KK ranks #145 out of 1006 companies in the Construction industry, which is in the top quartile — a strong position relative to peers. Overall, Dai-Ichi Cutter Kogyo KK has a GF Score™ of 71/100 and is considered Modestly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Dai-Ichi Cutter Kogyo KK's 5-Year Yield-on-Cost % compare to PWR and FIX?
According to the Construction industry distribution chart, Dai-Ichi Cutter Kogyo KK ranks #145 out of 1006 companies for 5-Year Yield-on-Cost %. This places Dai-Ichi Cutter Kogyo KK in the top 14% of its industry — outperforming the majority of peers. The industry median 5-Year Yield-on-Cost % is 3.46. Dai-Ichi Cutter Kogyo KK's value of 9.76 is 182.1% above this benchmark. Historically, Dai-Ichi Cutter Kogyo KK's own 5-Year Yield-on-Cost % has ranged from 1.42 to 11.40 over the past decade. While the company's 10-year median is 4.30 vs. the industry median of 3.46, Dai-Ichi Cutter Kogyo KK has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good 5-Year Yield-on-Cost % for a Construction company?
The median 5-Year Yield-on-Cost % among Construction companies is 3.46, based on 1,006 companies in the industry. Companies in the top quartile (top 25%) have a 5-Year Yield-on-Cost % significantly above this median, while those in the bottom quartile fall well below. However, 5-Year Yield-on-Cost % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Dai-Ichi Cutter Kogyo KK's current 5-Year Yield-on-Cost % of 9.76 is 182.1% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high 5-Year Yield-on-Cost % mean?
A high 5-Year Yield-on-Cost % can signal that a stock is expensive relative to its fundamentals. 5-Year Yield on Cost measures the expected yield based on a company's current yield and 5-year dividend growth. View historical data on Dai-Ichi Cutter Kogyo KK and its competitors. For the Construction industry, the median 5-Year Yield-on-Cost % is 3.46 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Dai-Ichi Cutter Kogyo KK's current 5-Year Yield-on-Cost % is 9.76, which is 127% above median its own 10-year median of 4.30. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Dai-Ichi Cutter Kogyo KK stock overvalued right now?
Based on GuruFocus' analysis, Dai-Ichi Cutter Kogyo KK (TSE:1716) is currently considered Modestly Overvalued. The stock's GF Value™ is 円1,332.12, compared to a current price of 円1,495.00 — trading 12.2% above its estimated fair value. The current 5-Year Yield-on-Cost % is 9.76, which is 127% above median its 10-year median of 4.30 and 182.1% above the Construction industry median of 3.46. Dai-Ichi Cutter Kogyo KK's overall GF Score™ is 71/100 with 6 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is 5-Year Yield-on-Cost % calculated?
5-Year Yield-on-Cost % is calculated from a company's financial statements. For Dai-Ichi Cutter Kogyo KK (TSE:1716), the current 5-Year Yield-on-Cost % is 9.76 as of Aug. 16, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Dai-Ichi Cutter Kogyo KK (TSE:1716) Overvalued in 2026?
Based on GuruFocus' analysis, Dai-Ichi Cutter Kogyo KK stock appears to be overvalued.
The current stock price of 円1,495.00 is trading 12.2% above its estimated GF Value™ of 円1,332.12.
GuruFocus considers Dai-Ichi Cutter Kogyo KK to be Modestly Overvalued.
Key valuation signals for TSE:1716:
5-Year Yield-on-Cost %: 9.76 (127% above median its 10-year median of 4.30)
GF Value™: 円1,332.12 vs. price of 円1,495.00 (12.2% above fair value)
Industry Position: 182.1% above the Construction median (#145 of 1006)
No single metric tells the full story. See the TSE:1716 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Dai-Ichi Cutter Kogyo KK operates in the construction industry. It performs cutting, drilling, and surface polishing works for asphalt and concrete infrastructures. It also provides washing works for production facilities. The company's business division includes Cutting and drilling work business, Building maintenance business, and Reuse and recycling business. The company generates the majority of its revenue from Cutting and drilling work business.
71GF Score
Get the complete analysis for TSE:1716
5-Year Yield-on-Cost % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TSE:1716 has been successfully added to your 
