Maruyama MFG CoTSE:6316 -1.87%71 EBITDA Margin % is 6.35% as of Mar. 2026, which is 5% above its 10-year median of 6.05. GuruFocus rates TSE:6316 with a GF Score™ of 71/100 and a GF Value™ of 円2,518.50 (Fairly Valued). The stock has 6 warning signs investors should review. Among 208 Farm & Heavy Construction Machinery companies, Maruyama MFG Co ranks worse than 66.83% on this metric.
EBITDA Margin % is calculated as EBITDA divided by its Revenue. Maruyama MFG Co's EBITDA for the
six
months ended in Mar. 2026 was 円1,292 Mil. Maruyama MFG Co's Revenue for the
six
months ended in Mar. 2026 was 円20,349 Mil. Therefore, Maruyama MFG Co's EBITDA margin for the quarter that ended in Mar. 2026 was 6.35%.
Maruyama MFG Co (TSE:6316) EBITDA Margin % Explanation
EBITDA Margin % is the ratio of EBITDA divided by net sales or Revenue. It is an performance metric measuring company's operating profitability. EBITDA Margin takes depreciation and amortization, interest expense and tax into account, which makes it easy to compare the relative profitability of companies of different sizes in the same industry.
Maruyama MFG Co EBITDA Margin % Related Terms
Maruyama MFG Co EBITDA Margin % Historical Data
* Premium members only.
The historical data trend for Maruyama MFG Co's EBITDA Margin % can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
TSE:6316 vs CAT, DE, PCAR: EBITDA Margin % Comparison
For the Farm & Heavy Construction Machinery subindustry, Maruyama MFG Co's EBITDA Margin %, along with its competitors' market caps and EBITDA Margin % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Maruyama MFG Co EBITDA Margin % vs Farm & Heavy Construction Machinery Industry
For the Farm & Heavy Construction Machinery industry and Industrials sector, Maruyama MFG Co's EBITDA Margin % distribution charts can be found below:
* The bar in red indicates where Maruyama MFG Co's EBITDA Margin % falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Maruyama MFG Co (TSE:6316) has a EBITDA Margin % of 6.35% as of Mar. 2026. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on Maruyama MFG Co and its competitors. This is near median its historical median of 6.05. Over the past decade, Maruyama MFG Co's EBITDA Margin % has ranged from 4.09 to 7.26. According to the industry distribution chart, Maruyama MFG Co ranks #139 out of 208 companies in the Farm & Heavy Construction Machinery industry, placing it in the top 66.8%.
Is Maruyama MFG Co's EBITDA Margin % too high?
Maruyama MFG Co's current EBITDA Margin % of 6.35% is near median its 10-year median of 6.05. Over the past 10 years, this metric has ranged from a low of 4.09 to a high of 7.26. The Farm & Heavy Construction Machinery industry median EBITDA Margin % is 10.73. Maruyama MFG Co's value of 6.35% is 40.8% below this industry median. Based on the distribution chart, Maruyama MFG Co ranks #139 out of 208 companies in the Farm & Heavy Construction Machinery industry, which is below the industry midpoint. Overall, Maruyama MFG Co has a GF Score™ of 71/100 and is considered Fairly Valued, reflecting its overall financial health beyond just this single metric.
How does Maruyama MFG Co's EBITDA Margin % compare to CAT and DE?
According to the Farm & Heavy Construction Machinery industry distribution chart, Maruyama MFG Co ranks #139 out of 208 companies for EBITDA Margin %. This places Maruyama MFG Co in the lower half of its industry. The industry median EBITDA Margin % is 10.73. Maruyama MFG Co's value of 6.35% is 40.8% below this benchmark. Historically, Maruyama MFG Co's own EBITDA Margin % has ranged from 4.09 to 7.26 over the past decade. While the company's 10-year median is 6.05 vs. the industry median of 10.73, Maruyama MFG Co has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good EBITDA Margin % for a Farm & Heavy Construction Machinery company?
The median EBITDA Margin % among Farm & Heavy Construction Machinery companies is 10.73, based on 208 companies in the industry. Companies in the top quartile (top 25%) have a EBITDA Margin % significantly above this median, while those in the bottom quartile fall well below. However, EBITDA Margin % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Maruyama MFG Co's current EBITDA Margin % of 6.35% is 40.8% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high EBITDA Margin % mean?
A high EBITDA Margin % can signal that a stock is expensive relative to its fundamentals. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on Maruyama MFG Co and its competitors. For the Farm & Heavy Construction Machinery industry, the median EBITDA Margin % is 10.73 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Maruyama MFG Co's current EBITDA Margin % is 6.35%, which is near median its own 10-year median of 6.05. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Maruyama MFG Co stock overvalued right now?
Based on GuruFocus' analysis, Maruyama MFG Co (TSE:6316) is currently considered Fairly Valued. The stock's GF Value™ is 円2,518.50, compared to a current price of 円2,628.00 — trading 4.3% above its estimated fair value. The current EBITDA Margin % is 6.35%, which is near median its 10-year median of 6.05 and 40.8% below the Farm & Heavy Construction Machinery industry median of 10.73. Maruyama MFG Co's overall GF Score™ is 71/100 with 6 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is EBITDA Margin % calculated?
EBITDA Margin % is calculated from a company's financial statements. For Maruyama MFG Co (TSE:6316), the current EBITDA Margin % is 6.35% as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Maruyama MFG Co (TSE:6316) Overvalued in 2026?
Based on GuruFocus' analysis, Maruyama MFG Co stock appears to be overvalued.
The current stock price of 円2,628.00 is trading 4.3% above its estimated GF Value™ of 円2,518.50.
GuruFocus considers Maruyama MFG Co to be Fairly Valued.
Key valuation signals for TSE:6316:
EBITDA Margin %: 6.35% (near median its 10-year median of 6.05)
GF Value™: 円2,518.50 vs. price of 円2,628.00 (4.3% above fair value)
Industry Position: 40.8% below the Farm & Heavy Construction Machinery median (#139 of 208)
No single metric tells the full story. See the TSE:6316 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Maruyama MFG Co Inc is a Japan-based company engaged in the manufacture and sale of agricultural machines and environmental sanitation machines. It also manufactures and sells firefighting equipment, industrial pumps, cleaning equipment, construction machinery, engines, cars and other vehicles used for agriculture. In addition, the group is also involved in the contracted design, construction of plumbing and fire-prevention equipment real estate and leasing business. The group conducts its business operations in Japan and internationally.
71GF Score
Get the complete analysis for TSE:6316
EBITDA Margin % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TSE:6316 has been successfully added to your 
