Maruyama MFG CoTSE:6316 -1.87%71 PEG Ratio is 1.21 as of Jul. 11, 2026, which is 15% below its 10-year median of 1.43. GuruFocus rates TSE:6316 with a GF Score™ of 71/100 and a GF Value™ of 円2,518.85 (Fairly Valued). The stock has 6 warning signs investors should review. Among 105 Farm & Heavy Construction Machinery companies, Maruyama MFG Co ranks worse than 57.14% on this metric.
* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
The historical rank and industry rank for Maruyama MFG Co's PEG Ratio or its related term are showing as below:
TSE:6316'
s PEG Ratio Range Over the Past 10 Years
Min: 0.79 Med: 1.43 Max: 5.28
Current: 1.21
During the past 13 years, Maruyama MFG Co's highest PEG Ratio was 5.28. The lowest was 0.79. And the median was 1.43.
TSE:6316's PEG Ratio is ranked worse than 57.14% of 105
companies
in the Farm & Heavy Construction Machinery industry
Industry Median: 1.05
vs TSE:6316: 1.21
Peter Lynch thinks a company with a P/E ratio equal to its growth rate is fairly valued.
Maruyama MFG Co (TSE:6316) PEG Ratio Explanation
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
Maruyama MFG Co PEG Ratio Related Terms
Maruyama MFG Co PEG Ratio Historical Data
* Premium members only.
The historical data trend for Maruyama MFG Co's PEG Ratio can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Farm & Heavy Construction Machinery subindustry, Maruyama MFG Co's PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Maruyama MFG Co PEG Ratio vs Farm & Heavy Construction Machinery Industry
For the Farm & Heavy Construction Machinery industry and Industrials sector, Maruyama MFG Co's PEG Ratio distribution charts can be found below:
* The bar in red indicates where Maruyama MFG Co's PEG Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
Maruyama MFG Co (TSE:6316) has a PEG Ratio of 1.21 as of Jul. 11, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Maruyama MFG Co and its competitors. This is 15% below median its historical median of 1.43. Over the past decade, Maruyama MFG Co's PEG Ratio has ranged from 0.79 to 5.28. According to the industry distribution chart, Maruyama MFG Co ranks #60 out of 105 companies in the Farm & Heavy Construction Machinery industry, placing it in the top 57.1%.
Is Maruyama MFG Co's PEG Ratio too high?
Maruyama MFG Co's current PEG Ratio of 1.21 is 15% below median its 10-year median of 1.43. Over the past 10 years, this metric has ranged from a low of 0.79 to a high of 5.28. The Farm & Heavy Construction Machinery industry median PEG Ratio is 1.05. Maruyama MFG Co's value of 1.21 is 15.2% above this industry median. Based on the distribution chart, Maruyama MFG Co ranks #60 out of 105 companies in the Farm & Heavy Construction Machinery industry, which is below the industry midpoint. Overall, Maruyama MFG Co has a GF Score™ of 71/100 and is considered Fairly Valued, reflecting its overall financial health beyond just this single metric.
How does Maruyama MFG Co's PEG Ratio compare to CAT and DE?
According to the Farm & Heavy Construction Machinery industry distribution chart, Maruyama MFG Co ranks #60 out of 105 companies for PEG Ratio. This places Maruyama MFG Co in the lower half of its industry. The industry median PEG Ratio is 1.05. Maruyama MFG Co's value of 1.21 is 15.2% above this benchmark. Historically, Maruyama MFG Co's own PEG Ratio has ranged from 0.79 to 5.28 over the past decade. While the company's 10-year median is 1.43 vs. the industry median of 1.05, Maruyama MFG Co has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for a Farm & Heavy Construction Machinery company?
The median PEG Ratio among Farm & Heavy Construction Machinery companies is 1.05, based on 105 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Maruyama MFG Co's current PEG Ratio of 1.21 is 15.2% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Maruyama MFG Co and its competitors. For the Farm & Heavy Construction Machinery industry, the median PEG Ratio is 1.05 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Maruyama MFG Co's current PEG Ratio is 1.21, which is 15% below median its own 10-year median of 1.43. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Maruyama MFG Co stock overvalued right now?
Based on GuruFocus' analysis, Maruyama MFG Co (TSE:6316) is currently considered Fairly Valued. The stock's GF Value™ is 円2,518.85, compared to a current price of 円2,628.00 — trading 4.3% above its estimated fair value. The current PEG Ratio is 1.21, which is 15% below median its 10-year median of 1.43 and 15.2% above the Farm & Heavy Construction Machinery industry median of 1.05. Maruyama MFG Co's overall GF Score™ is 71/100 with 6 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For Maruyama MFG Co (TSE:6316), the current PEG Ratio is 1.21 as of Jul. 11, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Maruyama MFG Co (TSE:6316) Overvalued in 2026?
Based on GuruFocus' analysis, Maruyama MFG Co stock appears to be overvalued.
The current stock price of 円2,628.00 is trading 4.3% above its estimated GF Value™ of 円2,518.85.
GuruFocus considers Maruyama MFG Co to be Fairly Valued.
Key valuation signals for TSE:6316:
PEG Ratio: 1.21 (15% below median its 10-year median of 1.43)
GF Value™: 円2,518.85 vs. price of 円2,628.00 (4.3% above fair value)
Industry Position: 15.2% above the Farm & Heavy Construction Machinery median (#60 of 105)
No single metric tells the full story. See the TSE:6316 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Maruyama MFG Co Inc is a Japan-based company engaged in the manufacture and sale of agricultural machines and environmental sanitation machines. It also manufactures and sells firefighting equipment, industrial pumps, cleaning equipment, construction machinery, engines, cars and other vehicles used for agriculture. In addition, the group is also involved in the contracted design, construction of plumbing and fire-prevention equipment real estate and leasing business. The group conducts its business operations in Japan and internationally.
71GF Score
Get the complete analysis for TSE:6316
PEG Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TSE:6316 has been successfully added to your 
