Takeuchi Mfg CoTSE:6432 +1.11%93 EBITDA Margin % is 17.96% as of Feb. 2026, which is 16% above its 10-year median of 15.51. GuruFocus rates TSE:6432 with a GF Score™ of 93/100 and a GF Value™ of 円5,793.84 (Modestly Overvalued). The stock has 6 warning signs investors should review. Among 209 Farm & Heavy Construction Machinery companies, Takeuchi Mfg Co ranks better than 82.78% on this metric.
EBITDA Margin % is calculated as EBITDA divided by its Revenue. Takeuchi Mfg Co's EBITDA for the
three
months ended in Feb. 2026 was 円9,421 Mil. Takeuchi Mfg Co's Revenue for the
three
months ended in Feb. 2026 was 円52,451 Mil. Therefore, Takeuchi Mfg Co's EBITDA margin for the quarter that ended in Feb. 2026 was 17.96%.
Takeuchi Mfg Co (TSE:6432) EBITDA Margin % Explanation
EBITDA Margin % is the ratio of EBITDA divided by net sales or Revenue. It is an performance metric measuring company's operating profitability. EBITDA Margin takes depreciation and amortization, interest expense and tax into account, which makes it easy to compare the relative profitability of companies of different sizes in the same industry.
Takeuchi Mfg Co EBITDA Margin % Related Terms
Takeuchi Mfg Co EBITDA Margin % Historical Data
* Premium members only.
The historical data trend for Takeuchi Mfg Co's EBITDA Margin % can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
TSE:6432 vs CAT, DE, PCAR: EBITDA Margin % Comparison
For the Farm & Heavy Construction Machinery subindustry, Takeuchi Mfg Co's EBITDA Margin %, along with its competitors' market caps and EBITDA Margin % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Takeuchi Mfg Co EBITDA Margin % vs Farm & Heavy Construction Machinery Industry
For the Farm & Heavy Construction Machinery industry and Industrials sector, Takeuchi Mfg Co's EBITDA Margin % distribution charts can be found below:
* The bar in red indicates where Takeuchi Mfg Co's EBITDA Margin % falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Takeuchi Mfg Co (TSE:6432) has a EBITDA Margin % of 17.96% as of Feb. 2026. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on Takeuchi Mfg Co and its competitors. This is 16% above median its historical median of 15.51. Over the past decade, Takeuchi Mfg Co's EBITDA Margin % has ranged from 12.24 to 19.18. According to the industry distribution chart, Takeuchi Mfg Co ranks #36 out of 209 companies in the Farm & Heavy Construction Machinery industry, placing it in the top 17.2%.
Is Takeuchi Mfg Co's EBITDA Margin % too high?
Takeuchi Mfg Co's current EBITDA Margin % of 17.96% is 16% above median its 10-year median of 15.51. Over the past 10 years, this metric has ranged from a low of 12.24 to a high of 19.18. The Farm & Heavy Construction Machinery industry median EBITDA Margin % is 10.98. Takeuchi Mfg Co's value of 17.96% is 63.6% above this industry median. Based on the distribution chart, Takeuchi Mfg Co ranks #36 out of 209 companies in the Farm & Heavy Construction Machinery industry, which is in the top quartile — a strong position relative to peers. Overall, Takeuchi Mfg Co has a GF Score™ of 93/100 and is considered Modestly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Takeuchi Mfg Co's EBITDA Margin % compare to CAT and DE?
According to the Farm & Heavy Construction Machinery industry distribution chart, Takeuchi Mfg Co ranks #36 out of 209 companies for EBITDA Margin %. This places Takeuchi Mfg Co in the top 17% of its industry — outperforming the majority of peers. The industry median EBITDA Margin % is 10.98. Takeuchi Mfg Co's value of 17.96% is 63.6% above this benchmark. Historically, Takeuchi Mfg Co's own EBITDA Margin % has ranged from 12.24 to 19.18 over the past decade. While the company's 10-year median is 15.51 vs. the industry median of 10.98, Takeuchi Mfg Co has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good EBITDA Margin % for a Farm & Heavy Construction Machinery company?
The median EBITDA Margin % among Farm & Heavy Construction Machinery companies is 10.98, based on 209 companies in the industry. Companies in the top quartile (top 25%) have a EBITDA Margin % significantly above this median, while those in the bottom quartile fall well below. However, EBITDA Margin % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Takeuchi Mfg Co's current EBITDA Margin % of 17.96% is 63.6% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high EBITDA Margin % mean?
A high EBITDA Margin % can signal that a stock is expensive relative to its fundamentals. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on Takeuchi Mfg Co and its competitors. For the Farm & Heavy Construction Machinery industry, the median EBITDA Margin % is 10.98 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Takeuchi Mfg Co's current EBITDA Margin % is 17.96%, which is 16% above median its own 10-year median of 15.51. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Takeuchi Mfg Co stock overvalued right now?
Based on GuruFocus' analysis, Takeuchi Mfg Co (TSE:6432) is currently considered Modestly Overvalued. The stock's GF Value™ is 円5,793.84, compared to a current price of 円7,290.00 — trading 25.8% above its estimated fair value. The current EBITDA Margin % is 17.96%, which is 16% above median its 10-year median of 15.51 and 63.6% above the Farm & Heavy Construction Machinery industry median of 10.98. Takeuchi Mfg Co's overall GF Score™ is 93/100 with 6 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is EBITDA Margin % calculated?
EBITDA Margin % is calculated from a company's financial statements. For Takeuchi Mfg Co (TSE:6432), the current EBITDA Margin % is 17.96% as of Feb. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Takeuchi Mfg Co (TSE:6432) Overvalued in 2026?
Based on GuruFocus' analysis, Takeuchi Mfg Co stock appears to be overvalued.
The current stock price of 円7,290.00 is trading 25.8% above its estimated GF Value™ of 円5,793.84.
GuruFocus considers Takeuchi Mfg Co to be Modestly Overvalued.
Key valuation signals for TSE:6432:
EBITDA Margin %: 17.96% (16% above median its 10-year median of 15.51)
GF Value™: 円5,793.84 vs. price of 円7,290.00 (25.8% above fair value)
Industry Position: 63.6% above the Farm & Heavy Construction Machinery median (#36 of 209)
No single metric tells the full story. See the TSE:6432 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Takeuchi Mfg Co Ltd manufactures construction machinery, including wheel and electrical compact excavators, track loaders, carriers, and mixers. Additional revenue is generated by distributing agitators for wastewater treatment facilities and manufacturers of chemicals, food, and other products. The company sells machinery to rental companies, dealers, distributors, and through trading companies to overseas distributors. Operating segments are reported by region: Japan, the United States, the United Kingdom, France, and China. Takeuchi's international sales network helps gain user feedback and discover areas to enhance support for customers. The majority of sales to external customers derive from Japan and the United States.
93GF Score
Get the complete analysis for TSE:6432
EBITDA Margin % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TSE:6432 has been successfully added to your 
