Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
ENOMOTO CoTSE:6928 +0.98%79 EBITDA Margin % is 11.98% as of Mar. 2026, which is 3% above its 10-year median of 11.64. GuruFocus rates TSE:6928 with a GF Score™ of 79/100 and a GF Value™ of 円1,842.59 (Significantly Overvalued). The stock has 5 warning signs investors should review. Among 2,477 Hardware companies, ENOMOTO Co ranks better than 69.84% on this metric.
EBITDA Margin % is calculated as EBITDA divided by its Revenue. ENOMOTO Co's EBITDA for the
six
months ended in Mar. 2026 was 円1,888 Mil. ENOMOTO Co's Revenue for the
six
months ended in Mar. 2026 was 円15,763 Mil. Therefore, ENOMOTO Co's EBITDA margin for the quarter that ended in Mar. 2026 was 11.98%.
ENOMOTO Co (TSE:6928) EBITDA Margin % Explanation
EBITDA Margin % is the ratio of EBITDA divided by net sales or Revenue. It is an performance metric measuring company's operating profitability. EBITDA Margin takes depreciation and amortization, interest expense and tax into account, which makes it easy to compare the relative profitability of companies of different sizes in the same industry.
ENOMOTO Co EBITDA Margin % Related Terms
ENOMOTO Co EBITDA Margin % Historical Data
* Premium members only.
The historical data trend for ENOMOTO Co's EBITDA Margin % can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Electronic Components subindustry, ENOMOTO Co's EBITDA Margin %, along with its competitors' market caps and EBITDA Margin % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
ENOMOTO Co EBITDA Margin % vs Hardware Industry
For the Hardware industry and Technology sector, ENOMOTO Co's EBITDA Margin % distribution charts can be found below:
* The bar in red indicates where ENOMOTO Co's EBITDA Margin % falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
ENOMOTO Co (TSE:6928) has a EBITDA Margin % of 11.98% as of Mar. 2026. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on ENOMOTO Co and its competitors. This is near median its historical median of 11.64. Over the past decade, ENOMOTO Co's EBITDA Margin % has ranged from 8.37 to 13.80. According to the industry distribution chart, ENOMOTO Co ranks #747 out of 2477 companies in the Hardware industry, placing it in the top 30.2%.
Is ENOMOTO Co's EBITDA Margin % too high?
ENOMOTO Co's current EBITDA Margin % of 11.98% is near median its 10-year median of 11.64. Over the past 10 years, this metric has ranged from a low of 8.37 to a high of 13.80. The Hardware industry median EBITDA Margin % is 7.01. ENOMOTO Co's value of 11.98% is 70.9% above this industry median. Based on the distribution chart, ENOMOTO Co ranks #747 out of 2477 companies in the Hardware industry, which is above the industry midpoint. Overall, ENOMOTO Co has a GF Score™ of 79/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does ENOMOTO Co's EBITDA Margin % compare to APH and GLW?
According to the Hardware industry distribution chart, ENOMOTO Co ranks #747 out of 2477 companies for EBITDA Margin %. This puts ENOMOTO Co in the upper half of its industry. The industry median EBITDA Margin % is 7.01. ENOMOTO Co's value of 11.98% is 70.9% above this benchmark. Historically, ENOMOTO Co's own EBITDA Margin % has ranged from 8.37 to 13.80 over the past decade. While the company's 10-year median is 11.64 vs. the industry median of 7.01, ENOMOTO Co has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good EBITDA Margin % for a Hardware company?
The median EBITDA Margin % among Hardware companies is 7.01, based on 2,477 companies in the industry. Companies in the top quartile (top 25%) have a EBITDA Margin % significantly above this median, while those in the bottom quartile fall well below. However, EBITDA Margin % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. ENOMOTO Co's current EBITDA Margin % of 11.98% is 70.9% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high EBITDA Margin % mean?
A high EBITDA Margin % can signal that a stock is expensive relative to its fundamentals. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on ENOMOTO Co and its competitors. For the Hardware industry, the median EBITDA Margin % is 7.01 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. ENOMOTO Co's current EBITDA Margin % is 11.98%, which is near median its own 10-year median of 11.64. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is ENOMOTO Co stock overvalued right now?
Based on GuruFocus' analysis, ENOMOTO Co (TSE:6928) is currently considered Significantly Overvalued. The stock's GF Value™ is 円1,842.59, compared to a current price of 円2,878.00 — trading 56.2% above its estimated fair value. The current EBITDA Margin % is 11.98%, which is near median its 10-year median of 11.64 and 70.9% above the Hardware industry median of 7.01. ENOMOTO Co's overall GF Score™ is 79/100 with 5 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is EBITDA Margin % calculated?
EBITDA Margin % is calculated from a company's financial statements. For ENOMOTO Co (TSE:6928), the current EBITDA Margin % is 11.98% as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is ENOMOTO Co (TSE:6928) Overvalued in 2026?
Based on GuruFocus' analysis, ENOMOTO Co stock appears to be overvalued.
The current stock price of 円2,878.00 is trading 56.2% above its estimated GF Value™ of 円1,842.59.
GuruFocus considers ENOMOTO Co to be Significantly Overvalued.
Key valuation signals for TSE:6928:
EBITDA Margin %: 11.98% (near median its 10-year median of 11.64)
GF Value™: 円1,842.59 vs. price of 円2,878.00 (56.2% above fair value)
Industry Position: 70.9% above the Hardware median (#747 of 2477)
No single metric tells the full story. See the TSE:6928 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
ENOMOTO Co Ltd is a precision component manufacturer. It is mainly engaged in manufacturing light-emitting diode (LED) lead frames and has production bases in Japan, China and the Philippines. Products offered by the company include lead frames for integrated circuit, (IC), transistor, LED and electronic parts.
79GF Score
Get the complete analysis for TSE:6928
EBITDA Margin % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TSE:6928 has been successfully added to your 
