Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Dmg Mori CoMRSKF 72 EV-to-EBIT is 23.75 as of Aug. 19, 2026, which is 134% above its 10-year median of 10.17. GuruFocus rates MRSKF with a GF Score™ of 72/100 and a GF Value™ of $16.20 (Significantly Overvalued). The stock has 9 warning signs investors should review. Among 2,371 Industrial Products companies, Dmg Mori Co ranks worse than 59.72% on this metric.
This is a more accurate valuation of companies' operation because it considers the debt and cash on its balance sheet, and non-operating items such as interest payment, tax, and one-time items are not included in the Operating Income.
Dmg Mori Co's Enterprise Value for the quarter that ended in Jun. 2026 was $3,760 Mil.
Dmg Mori Co's EBIT for the trailing twelve months (TTM) ended in Jun. 2026 adds up the quarterly data reported by the company within the most recent 12 months, which was $139 Mil.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Dmg Mori Co EV-to-EBIT Related Terms
Dmg Mori Co EV-to-EBIT Historical Data
* Premium members only.
The historical data trend for Dmg Mori Co's EV-to-EBIT can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Specialty Industrial Machinery subindustry, Dmg Mori Co's EV-to-EBIT, along with its competitors' market caps and EV-to-EBIT data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Dmg Mori Co EV-to-EBIT vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Dmg Mori Co's EV-to-EBIT distribution charts can be found below:
* The bar in red indicates where Dmg Mori Co's EV-to-EBIT falls into.
Dmg Mori Co's current Enterprise Value is $3,308 Mil.
Dmg Mori Co's EBIT for the trailing twelve months (TTM) ended in Jun. 2026 adds up the quarterly data reported by the company within the most recent 12 months, which was $139 Mil.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Dmg Mori Co (MRSKF) has a EV-to-EBIT of 23.75 as of Aug. 19, 2026. EV to EBIT ratio is the inverse of Joel Greenblatt's earnings yield definition. View historical data on Dmg Mori Co and its competitors. This is 134% above median its historical median of 10.17. According to the industry distribution chart, Dmg Mori Co ranks #1416 out of 2371 companies in the Industrial Products industry, placing it in the top 59.7%.
Is Dmg Mori Co's EV-to-EBIT too high?
Dmg Mori Co's current EV-to-EBIT of 23.75 is 134% above median its 10-year median of 10.17. The Industrial Products industry median EV-to-EBIT is 19.30. Dmg Mori Co's value of 23.75 is 23.1% above this industry median. Based on the distribution chart, Dmg Mori Co ranks #1416 out of 2371 companies in the Industrial Products industry, which is below the industry midpoint. Overall, Dmg Mori Co has a GF Score™ of 72/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Dmg Mori Co's EV-to-EBIT compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Dmg Mori Co ranks #1416 out of 2371 companies for EV-to-EBIT. This places Dmg Mori Co in the lower half of its industry. The industry median EV-to-EBIT is 19.30. Dmg Mori Co's value of 23.75 is 23.1% above this benchmark. While the company's 10-year median is 10.17 vs. the industry median of 19.30, Dmg Mori Co has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good EV-to-EBIT for an Industrial Products company?
The median EV-to-EBIT among Industrial Products companies is 19.30, based on 2,371 companies in the industry. Companies in the top quartile (top 25%) have a EV-to-EBIT significantly above this median, while those in the bottom quartile fall well below. However, EV-to-EBIT should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Dmg Mori Co's current EV-to-EBIT of 23.75 is 23.1% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high EV-to-EBIT mean?
A high EV-to-EBIT can signal that a stock is expensive relative to its fundamentals. EV to EBIT ratio is the inverse of Joel Greenblatt's earnings yield definition. View historical data on Dmg Mori Co and its competitors. For the Industrial Products industry, the median EV-to-EBIT is 19.30 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Dmg Mori Co's current EV-to-EBIT is 23.75, which is 134% above median its own 10-year median of 10.17. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Dmg Mori Co stock overvalued right now?
Based on GuruFocus' analysis, Dmg Mori Co (MRSKF) is currently considered Significantly Overvalued. The stock's GF Value™ is $16.20, compared to a current price of $21.90 — trading 35.2% above its estimated fair value. The current EV-to-EBIT is 23.75, which is 134% above median its 10-year median of 10.17 and 23.1% above the Industrial Products industry median of 19.30. Dmg Mori Co's overall GF Score™ is 72/100 with 9 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is EV-to-EBIT calculated?
EV-to-EBIT is calculated from a company's financial statements. For Dmg Mori Co (MRSKF), the current EV-to-EBIT is 23.75 as of Aug. 19, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Dmg Mori Co (MRSKF) Overvalued in 2026?
Based on GuruFocus' analysis, Dmg Mori Co stock appears to be overvalued.
The current stock price of $21.90 is trading 35.2% above its estimated GF Value™ of $16.20.
GuruFocus considers Dmg Mori Co to be Significantly Overvalued.
Key valuation signals for MRSKF:
EV-to-EBIT: 23.75 (134% above median its 10-year median of 10.17)
GF Value™: $16.20 vs. price of $21.90 (35.2% above fair value)
Industry Position: 23.1% above the Industrial Products median (#1416 of 2371)
No single metric tells the full story. See the MRSKF stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Dmg Mori Co Ltd is a manufacturer of machining tools used in various industries. The company specializes in industrial machining tools such as drills, mills, multiple axis turning centers, and CNC machines, as well as laser and ultrasonic cutting machines. Other products are complementary tools and applications to enhance the workplace around industrial machining tools, such as balancing devices and tool-handling devices. The product segments are the 5-axis machines and multipath mills. The end markets are homogeneously split between Germany, the rest of Europe, Asia and China, the Americas, and Japan.
72GF Score
Get the complete analysis for MRSKF
EV-to-EBIT is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
MRSKF has been successfully added to your 
