Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Dmg Mori CoMRSKF +43.35%79 Receivables Turnover is 1.72 as of Mar. 2026. GuruFocus rates MRSKF with a GF Score™ of 79/100 and a GF Value™ of $17.75 (Modestly Overvalued). The stock has 13 warning signs investors should review. Among 3,032 Industrial Products companies, Dmg Mori Co ranks better than 85.52% on this metric.
The Receivables Turnover ratio measures the number of times a company collects its average accounts receivable balance. It is calculated as Revenue divided by average Accounts Receivable. An efficient company has a higher accounts receivable turnover ratio while an inefficient company has a lower ratio. Dmg Mori Co's Revenue for the
three
months ended in Mar. 2026 was $865 Mil. Dmg Mori Co's average Accounts Receivable for the
three
months ended in Mar. 2026 was $502 Mil.
Hence, Dmg Mori Co's Receivables Turnover for the
three
months ended in Mar. 2026 was 1.72.
Dmg Mori Co (OTCPK:MRSKF) Receivables Turnover Explanation
An efficient company has a higher accounts receivable turnover ratio while an inefficient company has a lower ratio. This metric is commonly used to compare companies within the same industry to check whether they are on par with their competitors.
Dmg Mori Co Receivables Turnover Related Terms
Dmg Mori Co Receivables Turnover Historical Data
* Premium members only.
The historical data trend for Dmg Mori Co's Receivables Turnover can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
MRSKF vs GEV, ETN, PH: Receivables Turnover Comparison
For the Specialty Industrial Machinery subindustry, Dmg Mori Co's Receivables Turnover, along with its competitors' market caps and Receivables Turnover data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Dmg Mori Co Receivables Turnover vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Dmg Mori Co's Receivables Turnover distribution charts can be found below:
* The bar in red indicates where Dmg Mori Co's Receivables Turnover falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Dmg Mori Co (MRSKF) has a Receivables Turnover of 1.72 as of Mar. 2026. The accounts receivables turnover ratio measures the number of times a company collects its average accounts receivable balance. It is calculated as Revenue divided by Average Accounts Receivable. View historical data on Dmg Mori Co and its competitors. According to the industry distribution chart, Dmg Mori Co ranks #439 out of 3032 companies in the Industrial Products industry, placing it in the top 14.5%.
Is Dmg Mori Co's Receivables Turnover too high?
Dmg Mori Co's current Receivables Turnover is 1.72. The Industrial Products industry median Receivables Turnover is 4.45. Dmg Mori Co's value of 1.72 is 61.3% below this industry median. Based on the distribution chart, Dmg Mori Co ranks #439 out of 3032 companies in the Industrial Products industry, which is in the top quartile — a strong position relative to peers. Overall, Dmg Mori Co has a GF Score™ of 79/100 and is considered Modestly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Dmg Mori Co's Receivables Turnover compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Dmg Mori Co ranks #439 out of 3032 companies for Receivables Turnover. This places Dmg Mori Co in the top 15% of its industry — outperforming the majority of peers. The industry median Receivables Turnover is 4.45. Dmg Mori Co's value of 1.72 is 61.3% below this benchmark. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Receivables Turnover for an Industrial Products company?
The median Receivables Turnover among Industrial Products companies is 4.45, based on 3,032 companies in the industry. Companies in the top quartile (top 25%) have a Receivables Turnover significantly above this median, while those in the bottom quartile fall well below. However, Receivables Turnover should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Dmg Mori Co's current Receivables Turnover of 1.72 is 61.3% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Receivables Turnover mean?
A high Receivables Turnover can signal that a stock is expensive relative to its fundamentals. The accounts receivables turnover ratio measures the number of times a company collects its average accounts receivable balance. It is calculated as Revenue divided by Average Accounts Receivable. View historical data on Dmg Mori Co and its competitors. For the Industrial Products industry, the median Receivables Turnover is 4.45 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Dmg Mori Co's current Receivables Turnover is 1.72. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Dmg Mori Co stock overvalued right now?
Based on GuruFocus' analysis, Dmg Mori Co (MRSKF) is currently considered Modestly Overvalued. The stock's GF Value™ is $17.75, compared to a current price of $22.85 — trading 28.7% above its estimated fair value. The current Receivables Turnover is 1.72 and 61.3% below the Industrial Products industry median of 4.45. Dmg Mori Co's overall GF Score™ is 79/100 with 13 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Receivables Turnover calculated?
Receivables Turnover is calculated from a company's financial statements. For Dmg Mori Co (MRSKF), the current Receivables Turnover is 1.72 as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Dmg Mori Co (MRSKF) Overvalued in 2026?
Based on GuruFocus' analysis, Dmg Mori Co stock appears to be overvalued.
The current stock price of $22.85 is trading 28.7% above its estimated GF Value™ of $17.75.
GuruFocus considers Dmg Mori Co to be Modestly Overvalued.
Key valuation signals for MRSKF:
Receivables Turnover: 1.72
GF Value™: $17.75 vs. price of $22.85 (28.7% above fair value)
Industry Position: 61.3% below the Industrial Products median (#439 of 3032)
No single metric tells the full story. See the MRSKF stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Dmg Mori Co Ltd is a manufacturer of machining tools used in various industries. The company specializes in industrial machining tools such as drills, mills, multiple axis turning centers, and CNC machines, as well as laser and ultrasonic cutting machines. Other products are complementary tools and applications to enhance the workplace around industrial machining tools, such as balancing devices and tool-handling devices. The product segments are the 5-axis machines and multipath mills. The end markets are homogeneously split between Germany, the rest of Europe, Asia and China, the Americas, and Japan.
79GF Score
Get the complete analysis for MRSKF
Receivables Turnover is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
MRSKF has been successfully added to your 
