THBD (Third Bench) Earnings Power Value (EPV): $-0.18 (As of May24)


What is Third Bench Earnings Power Value (EPV)?

Third Bench THBD Earnings Power Value (EPV) is $-0.18 as of May24.

As of May24, Third Bench's earnings power value is $-0.18. *

* GuruFocus does not store EPV value into our database if Average Maintenance CAPEX is 0.

Margin of Safety is N/A.

The basic concept of EPV is that one should value a stock based on the current free cash flow of a company and not on future projections which may, or may not, come true. It is arguably a better way to analyze stocks than Discounted Cash Flow analysis that relies on highly speculative growth assumptions many years into the future. Assumption: Current profitability is sustainable.


Third Bench  (OTCPK:THBD) Earnings Power Value (EPV) Explanation

Assumption: Current profitability is sustainable.

Earnings power value (EPV) uses a very basic equation which assumes no growth, although it does rely on an assumption about the cost of capital as well as the fact that current earnings are sustainable. It also involves several adjustments to clean up the underlying Earnings figures.


Be Aware

Though using today's earnings in calculating Earnings Power Value, GuruFocus is normalizing these earnings to the business cycle. This eliminates the effects on profitability of valuing the firm at different points in the business cycle. This means that we are considering the average earnings over 5 years.


Third Bench Earnings Power Value (EPV) Related Terms


Third Bench Earnings Power Value (EPV) Historical Data

* Premium members only.

The historical data trend for Third Bench's Earnings Power Value (EPV) can be seen below:

* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD.
* For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.

Third Bench Earnings Power Value (EPV) Chart

Third Bench Annual Data
Trend Aug07 Aug08 Aug09 Aug10 Aug11 Aug12 Aug13 Aug14 Aug15
Earnings Power Value (EPV)
Get a 7-Day Free Trial Premium Member Only 0.00 0.00 0.00 0.00 0.00

Third Bench Quarterly Data
Feb10 May10 Aug10 Nov10 Feb11 May11 Aug11 Nov11 Feb12 May12 Aug12 Nov12 Feb13 May13 Aug13 Aug14 Aug15 May22 May23 May24
Earnings Power Value (EPV) Get a 7-Day Free Trial Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only 0.00 0.00 0.00 0.00 0.00

THBD vs SGI, SN, MHK: Earnings Power Value (EPV) Comparison

For the Furnishings, Fixtures & Appliances subindustry, Third Bench's Earnings Power Value (EPV), along with its competitors' market caps and Earnings Power Value (EPV) data, can be viewed below:

* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.


Third Bench Earnings Power Value (EPV) vs Furnishings, Fixtures & Appliances Industry

For the Furnishings, Fixtures & Appliances industry and Consumer Cyclical sector, Third Bench's Earnings Power Value (EPV) distribution charts can be found below:

* The bar in red indicates where Third Bench's Earnings Power Value (EPV) falls into.



Third Bench Earnings Power Value (EPV) Calculation

Earnings Power Value also known as just Earnings Power is a valuation technique popularised by Bruce Greenwald, an authority on value investing at Columbia University. It is arguably a better way to analyze stocks than Discounted Cash Flow analysis that relies on highly speculative growth assumptions many years into the future.

The basic concept of EPV is that one should value a stock based on the current free cash flow of a company and not on future projections which may, or may not, come true. This valuation tool excludes the potential growth that a company may have so that needs to be looked at separately. Since future growth is excluded from the analysis, only the maintenance capital expenditures are subtracted from after-tax EBIT (earnings before interest and taxes) and growth capex is ignored.

Third Bench's "Earning Power" Calculation:

Average of Last 20 Quarters Last Quarter
Revenue 2.31
DDA 0.00
Operating Margin % -7.42
SGA * 25% 0.31
Tax Rate % 0.00
Maintenance Capex 0.00
Cash and Cash Equivalents 0.40
Short-Term Debt 3.92
Long-Term Debt 8.28
Shares Outstanding (Diluted) 56.46

1. Start with "Earnings" not including accounting adjustments (one-time charges not excluded unless policy has changed). "Earnings" are "Operating Income.

2. Look at average margins over a business/Industry cycle: Average Operating Margin = -7.42%

To normalize margins and eliminate the effects on profitability of valuing the firm at different points in the business cycle, it is usually best to take a long-term average of operating margins. Ideally this would be as long as 10 years and include at least one economic downturn. However, since most of companies do not have as long as 10-year history, here GuruFocus uses the latest 5 years data to do the calculation. To smooth out unusual years but reflect recent developments, we take an average of the 5 year margin.

3. Multiply average margins by sustainable revenues and then adjust for maintenance SGA. This yields "normalized" EBIT:

To be conservative, GuruFocus uses an average of the 5 year revenues as the sustainable revenue.
EPV analysis recognises that part of SG&A expenditure is made to maintain and replace the existing assets, while part is made to grow sales. Since EPV is only interested in what it costs a going concern to maintain its existing asset base, it adds back a percentage of SG&A (between 15% and 50% - this is a matter of judgment and industry knowledge) to make up for the fact that some of this expenditure went to fund growth and shouldn't be accounted for. To start off, we assume 25% for the sake of prudence.
Sustainable Revenue = $2.31 Mil, Average Operating Margin = -7.42%, Average Adjusted SGA = 0.31,
therefore "Normalized" EBIT = Sustainable Revenue * Average Operating Margin + Average Adjusted SGA = 2.31 * -7.42% +0.31 = $0.141470585 Mil.

4. Multiply by one minus Average Tax Rate (NOPAT):

Same as average operating margin calculation, GuruFocus takes an average of the 5 years tax rates.
Average Tax Rate = 0.00%, and "Normalized" EBIT = $0.141470585 Mil,
therefore After-tax "Normalized" EBIT = "Normalized" EBIT * ( 1 - Average Tax Rate ) = 0.141470585 * ( 1 - 0.00% ) = $0.141470585 Mil.

5. Add back Excess Depreciation (after tax at 1/2 average tax rate). This yields "normalized" Earnings:

Excess Depreciation = Average DDA * % of Excess Depreciation (after tax at 1/2 average tax rate) = 0.00 * 0.5 * 0.00% = $0 Mil.
"Normalized" Earnings = After-tax "Normalized" EBIT + Excess Depreciation = 0.141470585 + 0 = $0.141470585 Mil.

6. Adjusted for Maintenance Capital Expenditure:

First, calculate the revenue change regarding to the previous year. If the revenue decreased from the previous year, then the Maintenance Capital Expenditure = Capital Expenditure (positive).
Second, if the revenue increased from the previous year, then calculate the percentage of Net PPE as of corresponding Revenue.
Third, calculate Capital Expenditure (positive) - percentage of Net PPE as of corresponding Revenue * revenue increase.
If [Capital Expenditure (positive) - percentage of Net PPE as of corresponding Revenue * revenue increase] was negative, then the Maintenance Capital Expenditure = Capital Expenditure (positive).
If [Capital Expenditure (positive) - percentage of Net PPE as of corresponding Revenue * revenue increase] was positive, then the Maintenance Capital Expenditure = Capital Expenditure (positive) - percentage of Net PPE as of corresponding Revenue * revenue increase.
Fourth, GuruFocus uses an average of the 5 year maintenance capital expenditures as maintenance CAPEX.
Third Bench's Average Maintenance CAPEX = $0.00 Mil *.
* GuruFocus does not store EPV value into our database if Average Maintenance CAPEX is 0.

7. Investors require a return of "WACC" for the risk they are taking: WACC = 9%

8. Third Bench's current cash and cash equivalent = $0.40 Mil.
Third Bench's current interest bearing debt = Long-Term Debt & Capital Lease Obligation + Short-Term Debt & Capital Lease Obligation = 8.28 + 3.92 = $12.201 Mil.
Third Bench's current Shares Outstanding (Diluted Average) = 56.46 Mil.

Third Bench's Earnings Power Value (EPV) for May24 is calculated as:

EPV = ( ( Norm. Earnings-Maint. CAPEX *) / WACC + CashandEquiv - Int. Bearing Debt ) / Shares Outstanding (Diluted Average)
= ( ( 0.141470585 - 0.00)/ 9%+0.40-12.201 )/56.46
=-0.18

Margin of Safety (EPV)=( Earnings Power Value (EPV)-Current Price )/Earnings Power Value (EPV)
=( -0.18125805248532-0.0001 )/-0.18125805248532
= N/A

* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD.
* For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.

* GuruFocus does not store EPV value into our database if Average Maintenance CAPEX is 0.

What does a Earnings Power Value (EPV) of $-0.18 mean?
Third Bench (THBD) has a Earnings Power Value (EPV) of $-0.18 as of May24. Bruce Greenwald's earnings power value focuses on current earnings without factoring in future growth. View historical data on Third Bench and its competitors.
Is Third Bench's Earnings Power Value (EPV) too high?
Third Bench's current Earnings Power Value (EPV) is $-0.18.
How does Third Bench's Earnings Power Value (EPV) compare to SGI and SN?
Third Bench's Earnings Power Value (EPV) of $-0.18 can be compared against companies in the Furnishings, Fixtures & Appliances industry. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Earnings Power Value (EPV) for a Furnishings, Fixtures & Appliances company?
A good Earnings Power Value (EPV) depends on the Furnishings, Fixtures & Appliances industry context. However, Earnings Power Value (EPV) should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Earnings Power Value (EPV) mean?
A high Earnings Power Value (EPV) can signal that a stock is expensive relative to its fundamentals. Bruce Greenwald's earnings power value focuses on current earnings without factoring in future growth. View historical data on Third Bench and its competitors. Third Bench's current Earnings Power Value (EPV) is $-0.18. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Third Bench stock overvalued right now?
Third Bench (THBD) has a current Earnings Power Value (EPV) of $-0.18. The current Earnings Power Value (EPV) is $-0.18. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Earnings Power Value (EPV) calculated?
Earnings Power Value (EPV) is calculated from a company's financial statements. For Third Bench (THBD), the current Earnings Power Value (EPV) is $-0.18 as of May24. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.

Third Bench Business Description

Address 710 North Post Oak, Suite 206, Houston, TX, USA, 77024
Third Bench Inc is a holding company. The company, along with its subsidiaries, offers products in categories: Residential Cabinets and countertops and commercial millwork throughout the Western U.S. for customers from California to Texas. It also provides installation services as a part of its vertical offering. Additionally, the company provides its products and services through its architectural millwork and retail facilities, located in Albuquerque and Las Cruces, New Mexico and Tucson, Arizona.