THBD (Third Bench) Beneish M-Score: 0.00 (As of Jun. 26, 2026)


What is Third Bench Beneish M-Score?

Third Bench THBD Beneish M-Score is 0.00 as of Jun. 26, 2026.

The zones of discrimination for M-Score is as such:

An M-Score of equal or less than -1.78 suggests that the company is unlikely to be a manipulator.
An M-Score of greater than -1.78 signals that the company is likely to be a manipulator.

The historical rank and industry rank for Third Bench's Beneish M-Score or its related term are showing as below:

During the past 9 years, the highest Beneish M-Score of Third Bench was 0.00. The lowest was 0.00. And the median was 0.00.

Third Bench Beneish M-Score Historical Data

* Premium members only.

The historical data trend for Third Bench's Beneish M-Score can be seen below:

* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD.
* For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.

Third Bench Beneish M-Score Chart

Third Bench Annual Data
Trend Aug07 Aug08 Aug09 Aug10 Aug11 Aug12 Aug13 Aug14 Aug15
Beneish M-Score
Get a 7-Day Free Trial Premium Member Only 0.00 0.00 0.00 0.00 0.00

Third Bench Quarterly Data
Feb10 May10 Aug10 Nov10 Feb11 May11 Aug11 Nov11 Feb12 May12 Aug12 Nov12 Feb13 May13 Aug13 Aug14 Aug15 May22 May23 May24
Beneish M-Score Get a 7-Day Free Trial Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only 0.00 0.00 0.00 0.00 0.00

THBD vs SGI, SN, MHK: Beneish M-Score Comparison

For the Furnishings, Fixtures & Appliances subindustry, Third Bench's Beneish M-Score, along with its competitors' market caps and Beneish M-Score data, can be viewed below:

* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.

Third Bench Beneish M-Score vs Furnishings, Fixtures & Appliances Industry

For the Furnishings, Fixtures & Appliances industry and Consumer Cyclical sector, Third Bench's Beneish M-Score distribution charts can be found below:

* The bar in red indicates where Third Bench's Beneish M-Score falls into.


Third Bench Beneish M-Score Calculation

The M-score was created by Professor Messod Beneish. Instead of measuring the bankruptcy risk (Altman Z-Score) or business trend (Piotroski F-Score), M-score can be used to detect the risk of earnings manipulation. This is the original research paper on M-score.

The M-Score Variables:

The M-score of Third Bench for today is based on a combination of the following eight different indices:

M=-4.84+0.92 * DSRI+0.528 * GMI+0.404 * AQI+0.892 * SGI+0.115 * DEPI
=-4.84+0.92 * +0.528 * +0.404 * +0.892 * +0.115 *
-0.172 * SGAI+4.679 * TATA-0.327 * LVGI
-0.172 * +4.679 * -0.327 *
=

* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD.
* For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.

This Year (May24) TTM:Last Year (Aug14) TTM:
Total Receivables was $2.84 Mil.
Revenue was 3.334 + 3.856 + 4.359 + 0 = $11.55 Mil.
Gross Profit was 1.444 + -2.678 + 1.647 + 0 = $0.41 Mil.
Total Current Assets was $4.96 Mil.
Total Assets was $6.12 Mil.
Property, Plant and Equipment(Net PPE) was $0.86 Mil.
Depreciation, Depletion and Amortization(DDA) was $0.00 Mil.
Selling, General, & Admin. Expense(SGA) was $5.58 Mil.
Total Current Liabilities was $9.56 Mil.
Long-Term Debt & Capital Lease Obligation was $8.28 Mil.
Net Income was -1.695 + -4.844 + -3.464 + 0 = $-10.00 Mil.
Non Operating Income was -0.457 + -0.815 + -2.532 + 0 = $-3.80 Mil.
Cash Flow from Operations was 0 + 0 + 0 + 0 = $0.00 Mil.
 Total Receivables was $0.00 Mil.
Revenue was 0 + 0 + 0 + 0 = $0.00 Mil.
Gross Profit was 0 + 0 + 0 + 0 = $0.00 Mil.
Total Current Assets was $0.01 Mil.
Total Assets was $0.01 Mil.
Property, Plant and Equipment(Net PPE) was $0.00 Mil.
Depreciation, Depletion and Amortization(DDA) was $0.00 Mil.
Selling, General, & Admin. Expense(SGA) was $0.31 Mil.
Total Current Liabilities was $0.91 Mil.
Long-Term Debt & Capital Lease Obligation was $0.00 Mil.

1. DSRI = Days Sales in Receivables Index

Measured as the ratio of Revenue in Total Receivables in year t to year t-1.

A large increase in DSR could be indicative of revenue inflation.

DSRI=(Receivables_t / Revenue_t) / (Receivables_t-1 / Revenue_t-1)
=(2.843 / 11.549) / (0 / 0)
=0.246168 /
=

2. GMI = Gross Margin Index

Measured as the ratio of gross margin in year t-1 to gross margin in year t.

Gross margin has deteriorated when this index is above 1. A firm with poorer prospects is more likely to manipulate earnings.

GMI=GrossMargin_t-1 / GrossMargin_t
=(GrossProfit_t-1 / Revenue_t-1) / (GrossProfit_t / Revenue_t)
=(0 / 0) / (0.413 / 11.549)
= / 0.035761
=

3. AQI = Asset Quality Index

AQI is the ratio of asset quality in year t to year t-1.

Asset quality is measured as the ratio of non-current assets other than Property, Plant and Equipment to Total Assets.

AQI=(1 - (CurrentAssets_t + PPE_t) / TotalAssets_t) / (1 - (CurrentAssets_t-1 + PPE_t-1) / TotalAssets_t-1)
=(1 - (4.957 + 0.861) / 6.119) / (1 - (0.006 + 0) / 0.006)
=0.049191 / 0
=

4. SGI = Sales Growth Index

Ratio of Revenue in year t to sales in year t-1.

Sales growth is not itself a measure of manipulation. However, growth companies are likely to find themselves under pressure to manipulate in order to keep up appearances.

SGI=Sales_t / Sales_t-1
=Revenue_t / Revenue_t-1
=11.549 / 0
=

5. DEPI = Depreciation Index

Measured as the ratio of the rate of Depreciation, Depletion and Amortization in year t-1 to the corresponding rate in year t.

DEPI greater than 1 indicates that assets are being depreciated at a slower rate. This suggests that the firm might be revising useful asset life assumptions upwards, or adopting a new method that is income friendly.

DEPI=(Depreciation_t-1 / (Depreciaton_t-1 + PPE_t-1)) / (Depreciation_t / (Depreciaton_t + PPE_t))
=(0 / (0 + 0)) / (0 / (0 + 0.861))
= / 0
=

Note: If the Depreciation, Depletion and Amortization data is not available, we assume that the depreciation rate is constant and set the Depreciation Index to 1.

6. SGAI = Sales, General and Administrative expenses Index

The ratio of Selling, General, & Admin. Expense(SGA) to Sales in year t relative to year t-1.

SGA expenses index > 1 means that the company is becoming less efficient in generate sales.

SGAI=(SGA_t / Sales_t) / (SGA_t-1 /Sales_t-1)
=(5.583 / 11.549) / (0.313 / 0)
=0.483418 /
=

7. LVGI = Leverage Index

The ratio of total debt to Total Assets in year t relative to yeat t-1.

An LVGI > 1 indicates an increase in leverage

LVGI=((LTD_t + CurrentLiabilities_t) / TotalAssets_t) / ((LTD_t-1 + CurrentLiabilities_t-1) / TotalAssets_t-1)
=((8.282 + 9.563) / 6.119) / ((0 + 0.906) / 0.006)
=2.916326 / 151
=

8. TATA = Total Accruals to Total Assets

Total accruals calculated as the change in working capital accounts other than cash less depreciation.

TATA=(IncomefromContinuingOperations_t - CashFlowsfromOperations_t) / TotalAssets_t
=(NetIncome_t - NonOperatingIncome_t - CashFlowsfromOperations_t) / TotalAssets_t
=(-10.003 - -3.804 - 0) / 6.119
=-1.013074

An M-Score of equal or less than -1.78 suggests that the company is unlikely to be a manipulator. An M-Score of greater than -1.78 signals that the company is likely to be a manipulator.

Frequently Asked Questions Learn more about Beneish M-Score →
What does a Beneish M-Score of 0.00 mean?
Third Bench (THBD) has a Beneish M-Score of 0.00 as of Jun. 26, 2026. The Beneish M-score measures the likelihood of earnings manipulation. View historical data on Third Bench and its competitors.
Is Third Bench's Beneish M-Score too high?
Third Bench's current Beneish M-Score is 0.00.
How does Third Bench's Beneish M-Score compare to SGI and SN?
Third Bench's Beneish M-Score of 0.00 can be compared against companies in the Furnishings, Fixtures & Appliances industry. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Beneish M-Score for a Furnishings, Fixtures & Appliances company?
A good Beneish M-Score depends on the Furnishings, Fixtures & Appliances industry context. However, Beneish M-Score should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Beneish M-Score mean?
A high Beneish M-Score can signal that a stock is expensive relative to its fundamentals. The Beneish M-score measures the likelihood of earnings manipulation. View historical data on Third Bench and its competitors. Third Bench's current Beneish M-Score is 0.00. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Third Bench stock overvalued right now?
Third Bench (THBD) has a current Beneish M-Score of 0.00. The current Beneish M-Score is 0.00. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Beneish M-Score calculated?
Beneish M-Score is calculated from a company's financial statements. For Third Bench (THBD), the current Beneish M-Score is 0.00 as of Jun. 26, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.

Third Bench Business Description

Address 710 North Post Oak, Suite 206, Houston, TX, USA, 77024
Third Bench Inc is a holding company. The company, along with its subsidiaries, offers products in categories: Residential Cabinets and countertops and commercial millwork throughout the Western U.S. for customers from California to Texas. It also provides installation services as a part of its vertical offering. Additionally, the company provides its products and services through its architectural millwork and retail facilities, located in Albuquerque and Las Cruces, New Mexico and Tucson, Arizona.