Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Electrosteel Castings (NSE:ELECTCAST) Forward PE Ratio Explanation
The Forward PE Ratio of a company is often used to compare current earnings to estimated future earnings, as well as gaining a clearer picture of what earnings will look like without charges and other accounting adjustments. If earnings are expected to grow in the future, the Forward PE Ratio will be lower than the current PE Ratio. This measure is also used to compare one company to another with a forward-looking focus.
Trailing PE Ratio relies on what is already done. It uses the current share price and divides by the total EPS (Basic) over the past 12 months. PE Ratio can be affected by Non Operating Income such as the sale of part of businesses. This may increase for the current year or quarter dramatically. But it cannot be repeated over and over. Therefore PE Ratio without NRI is a more accurate indication of valuation than PE Ratio .
Electrosteel Castings Forward PE Ratio Related Terms
Electrosteel Castings Forward PE Ratio Historical Data
* Premium members only.
The historical data trend for Electrosteel Castings's Forward PE Ratio can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Electrosteel Castings Forward PE Ratio Chart
Electrosteel Castings Annual Data
Trend
2025-03
2026-03
Forward PE Ratio
7.68
34.89
Electrosteel Castings Quarterly Data
2024-12
2025-03
2025-06
2025-09
2025-12
2026-03
2026-06
Forward PE Ratio
8.83
7.68
17.98
15.30
11.36
34.89
32.75
NSE:ELECTCAST vs TT, JCI, CARR: Forward PE Ratio Comparison
For the Building Products & Equipment subindustry, Electrosteel Castings's Forward PE Ratio, along with its competitors' market caps and Forward PE Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Electrosteel Castings Forward PE Ratio vs Construction Industry
For the Construction industry and Industrials sector, Electrosteel Castings's Forward PE Ratio distribution charts can be found below:
* The bar in red indicates where Electrosteel Castings's Forward PE Ratio falls into.
Electrosteel Castings Forward PE Ratio Calculation
It's a measure of the price-to-earnings ratio (PE Ratio) using forecasted earnings for the calculation. While the earnings used are just an estimate and are not as reliable as current earnings data, there is still benefit in estimated P/E analysis. The forecasted earnings used in the formula can either be for the next 12 months or for the next full-year fiscal period.
Electrosteel Castings (NSE:ELECTCAST) has a Forward PE Ratio of 28.02 as of Aug. 14, 2026. Forward P/E ratio is the share price dividend by the expected per-share earnings in the next 12 months. View historical data on Electrosteel Castings and its competitors. According to the industry distribution chart, Electrosteel Castings ranks #566 out of 649 companies in the Construction industry, placing it in the top 87.2%.
Is Electrosteel Castings' Forward PE Ratio too high?
Electrosteel Castings' current Forward PE Ratio is 28.02. The Construction industry median Forward PE Ratio is 13.74. Electrosteel Castings' value of 28.02 is 103.9% above this industry median. Based on the distribution chart, Electrosteel Castings ranks #566 out of 649 companies in the Construction industry, which is in the bottom quartile relative to peers. Overall, Electrosteel Castings has a GF Score™ of 79/100 and is considered Modestly Undervalued, reflecting its overall financial health beyond just this single metric.
How does Electrosteel Castings' Forward PE Ratio compare to TT and JCI?
According to the Construction industry distribution chart, Electrosteel Castings ranks #566 out of 649 companies for Forward PE Ratio. This places Electrosteel Castings in the lower half of its industry. The industry median Forward PE Ratio is 13.74. Electrosteel Castings' value of 28.02 is 103.9% above this benchmark. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Forward PE Ratio for a Construction company?
The median Forward PE Ratio among Construction companies is 13.74, based on 649 companies in the industry. Companies in the top quartile (top 25%) have a Forward PE Ratio significantly above this median, while those in the bottom quartile fall well below. However, Forward PE Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Electrosteel Castings's current Forward PE Ratio of 28.02 is 103.9% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Forward PE Ratio mean?
A high Forward PE Ratio can signal that a stock is expensive relative to its fundamentals. Forward P/E ratio is the share price dividend by the expected per-share earnings in the next 12 months. View historical data on Electrosteel Castings and its competitors. For the Construction industry, the median Forward PE Ratio is 13.74 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Electrosteel Castings's current Forward PE Ratio is 28.02. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Electrosteel Castings stock overvalued right now?
Based on GuruFocus' analysis, Electrosteel Castings (NSE:ELECTCAST) is currently considered Modestly Undervalued. The stock's GF Value™ is ₹86.40, compared to a current price of ₹70.74 — trading 18.1% below its estimated fair value. The current Forward PE Ratio is 28.02 and 103.9% above the Construction industry median of 13.74. Electrosteel Castings' overall GF Score™ is 79/100 with 5 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Forward PE Ratio calculated?
Forward PE Ratio is calculated from a company's financial statements. For Electrosteel Castings (NSE:ELECTCAST), the current Forward PE Ratio is 28.02 as of Aug. 14, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Electrosteel Castings (NSE:ELECTCAST) Overvalued in 2026?
Based on GuruFocus' analysis, Electrosteel Castings stock appears to be undervalued.
The current stock price of ₹70.74 is trading 18.1% below its estimated GF Value™ of ₹86.40.
GuruFocus considers Electrosteel Castings to be Modestly Undervalued.
Key valuation signals for NSE:ELECTCAST:
Forward PE Ratio: 28.02
GF Value™: ₹86.40 vs. price of ₹70.74 (18.1% below fair value)
Industry Position: 103.9% above the Construction median (#566 of 649)
No single metric tells the full story. See the NSE:ELECTCAST stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Electrosteel Castings Ltd is a pipeline solution provider. The business activity of the firm is the manufacturing of ductile iron pipes, fittings, and cast-iron pipes. It offers a range of pipes, which includes DI pipes, Electrolock pipes, and DI flanged pipes, among others. In addition, it also produces Pig Iron, Metallurgical Coke, Sponge Iron, Sinter, Cement, Ferro products, Paint and Power. The company has one reportable segment, namely, Pipes and Fittings, and all other activities revolve around the main business. Geographically, it derives a majority of its revenue within India and also has its presence in international markets through exports of its products.
79GF Score
Get the complete analysis for NSE:ELECTCAST
Forward PE Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
NSE:ELECTCAST has been successfully added to your 
