The Dividend Payout Ratio is the measure of dividends paid out to shareholders relative to the company's net income. It is calculated as the Dividends per Share divided by the Earnings per Share (Diluted) during the same time period. Electrosteel Castings's Dividend Payout Ratio for the
months ended in Mar. 2026 was 0.00.
The historical rank and industry rank for Electrosteel Castings's Dividend Payout Ratio or its related term are showing as below:
NSE:ELECTCAST'
s Dividend Payout Ratio Range Over the Past 10 Years
Min: 0.04 Med: 0.13 Max: 0.46
Current: 0.46
During the past 13 years, the highest Dividend Payout Ratio of Electrosteel Castings was 0.46. The lowest was 0.04. And the median was 0.13.
NSE:ELECTCAST's Dividend Payout Ratio is ranked worse than 59.58% of 861
companies
in the Construction industry
Industry Median: 0.39
vs NSE:ELECTCAST: 0.46
During the past 13 years, the highest Trailing Annual Dividend Yield of Electrosteel Castings was 2.49%. The lowest was 0.49%. And the median was 1.17%.
During the past 12 months, Electrosteel Castings's average Dividends Per Share Growth Rate was 55.60% per year.
During the past 3 years, the average Dividends Per Share Growth Rate was 20.50% per year.
During the past 5 years, the average Dividends Per Share Growth Rate was 41.30% per year.
During the past 13 years, the highest 3-Year average Dividends Per Share Growth Rate of Electrosteel Castings was 71.00% per year. The lowest was -41.50% per year. And the median was -5.90% per year.
The growth rate is calculated with least square regression.
For more information regarding to dividend, please check our Dividend Page.
* Please note that "special dividend" is not included in the calculation of dividend per share and related fields.
Electrosteel Castings (NSE:ELECTCAST) Dividend Payout Ratio Explanation
In dividends investing, Dividend Payout Ratio and Dividend Growth Rate are the two most important variables for consideration. A lower payout ratio may indicate that the company has more room to increase its dividends.
Electrosteel Castings Dividend Payout Ratio Related Terms
Electrosteel Castings Dividend Payout Ratio Historical Data
* Premium members only.
The historical data trend for Electrosteel Castings's Dividend Payout Ratio can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
NSE:ELECTCAST vs TT, JCI, CARR: Dividend Payout Ratio Comparison
For the Building Products & Equipment subindustry, Electrosteel Castings's Dividend Payout Ratio, along with its competitors' market caps and Dividend Payout Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Electrosteel Castings Dividend Payout Ratio vs Construction Industry
For the Construction industry and Industrials sector, Electrosteel Castings's Dividend Payout Ratio distribution charts can be found below:
* The bar in red indicates where Electrosteel Castings's Dividend Payout Ratio falls into.
Electrosteel Castings Dividend Payout Ratio Calculation
The Dividend Payout Ratio is the measure of dividends paid out to shareholders relative to the company's net income. It is calculated as the Dividends per Share divided by the Earnings per Share (Diluted) during the same time period.
Electrosteel Castings's Dividend Payout Ratio for the fiscal year that ended in Mar. 2026 is calculated as
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Electrosteel Castings (NSE:ELECTCAST) has a Dividend Payout Ratio of 0.00 as of Mar. 2026. Dividend payout ratio is the percent of company earnings paid out as dividends. View historical data on Electrosteel Castings and its competitors. Over the past decade, Electrosteel Castings' Dividend Payout Ratio has ranged from 0.04 to 0.46. According to the industry distribution chart, Electrosteel Castings ranks #513 out of 861 companies in the Construction industry, placing it in the top 59.6%.
Is Electrosteel Castings' Dividend Payout Ratio too high?
Electrosteel Castings' current Dividend Payout Ratio is 0.00. Over the past 10 years, this metric has ranged from a low of 0.04 to a high of 0.46. Based on the distribution chart, Electrosteel Castings ranks #513 out of 861 companies in the Construction industry, which is below the industry midpoint. Overall, Electrosteel Castings has a GF Score™ of 72/100 and is considered Modestly Undervalued, reflecting its overall financial health beyond just this single metric.
How does Electrosteel Castings' Dividend Payout Ratio compare to TT and JCI?
According to the Construction industry distribution chart, Electrosteel Castings ranks #513 out of 861 companies for Dividend Payout Ratio. This places Electrosteel Castings in the lower half of its industry. The industry median Dividend Payout Ratio is 0.39. Historically, Electrosteel Castings' own Dividend Payout Ratio has ranged from 0.04 to 0.46 over the past decade. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Dividend Payout Ratio for a Construction company?
The median Dividend Payout Ratio among Construction companies is 0.39, based on 861 companies in the industry. Companies in the top quartile (top 25%) have a Dividend Payout Ratio significantly above this median, while those in the bottom quartile fall well below. However, Dividend Payout Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Dividend Payout Ratio mean?
A high Dividend Payout Ratio can signal that a stock is expensive relative to its fundamentals. Dividend payout ratio is the percent of company earnings paid out as dividends. View historical data on Electrosteel Castings and its competitors. For the Construction industry, the median Dividend Payout Ratio is 0.39 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Electrosteel Castings's current Dividend Payout Ratio is 0.00. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Electrosteel Castings stock overvalued right now?
Based on GuruFocus' analysis, Electrosteel Castings (NSE:ELECTCAST) is currently considered Modestly Undervalued. The stock's GF Value™ is ₹86.44, compared to a current price of ₹74.69 — trading 13.6% below its estimated fair value. The current Dividend Payout Ratio is 0.00. Electrosteel Castings' overall GF Score™ is 72/100 with 4 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Dividend Payout Ratio calculated?
Dividend Payout Ratio is calculated from a company's financial statements. For Electrosteel Castings (NSE:ELECTCAST), the current Dividend Payout Ratio is 0.00 as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Electrosteel Castings (NSE:ELECTCAST) Overvalued in 2026?
Based on GuruFocus' analysis, Electrosteel Castings stock appears to be undervalued.
The current stock price of ₹74.69 is trading 13.6% below its estimated GF Value™ of ₹86.44.
GuruFocus considers Electrosteel Castings to be Modestly Undervalued.
Key valuation signals for NSE:ELECTCAST:
Dividend Payout Ratio: 0.00
GF Value™: ₹86.44 vs. price of ₹74.69 (13.6% below fair value)
No single metric tells the full story. See the NSE:ELECTCAST stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Electrosteel Castings Ltd is a pipeline solution provider. The business activity of the firm is the manufacturing of ductile iron pipes, fittings, and cast-iron pipes. It offers a range of pipes, which includes DI pipes, Electrolock pipes, and DI flanged pipes, among others. In addition, it also produces Pig Iron, Metallurgical Coke, Sponge Iron, Sinter, Cement, Ferro products, Paint and Power. The company has one reportable segment, namely, Pipes and Fittings, and all other activities revolve around the main business. Geographically, it derives a majority of its revenue within India and also has its presence in international markets through exports of its products.
72GF Score
Get the complete analysis for NSE:ELECTCAST
Dividend Payout Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
NSE:ELECTCAST has been successfully added to your 
