Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
KenMec Mechanical Engineering Co (ROCO:6125) Forward PE Ratio Explanation
The Forward PE Ratio of a company is often used to compare current earnings to estimated future earnings, as well as gaining a clearer picture of what earnings will look like without charges and other accounting adjustments. If earnings are expected to grow in the future, the Forward PE Ratio will be lower than the current PE Ratio. This measure is also used to compare one company to another with a forward-looking focus.
Trailing PE Ratio relies on what is already done. It uses the current share price and divides by the total EPS (Basic) over the past 12 months. PE Ratio can be affected by Non Operating Income such as the sale of part of businesses. This may increase for the current year or quarter dramatically. But it cannot be repeated over and over. Therefore PE Ratio without NRI is a more accurate indication of valuation than PE Ratio .
KenMec Mechanical Engineering Co Forward PE Ratio Related Terms
KenMec Mechanical Engineering Co Forward PE Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
KenMec Mechanical Engineering Co Forward PE Ratio Chart
KenMec Mechanical Engineering Co Annual Data
Trend
Forward PE Ratio
KenMec Mechanical Engineering Co Quarterly Data
2026-06
Forward PE Ratio
29.53
ROCO:6125 vs GEV, ETN, PH: Forward PE Ratio Comparison
For the Specialty Industrial Machinery subindustry, KenMec Mechanical Engineering Co's Forward PE Ratio, along with its competitors' market caps and Forward PE Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
KenMec Mechanical Engineering Co Forward PE Ratio vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, KenMec Mechanical Engineering Co's Forward PE Ratio distribution charts can be found below:
* The bar in red indicates where KenMec Mechanical Engineering Co's Forward PE Ratio falls into.
KenMec Mechanical Engineering Co Forward PE Ratio Calculation
It's a measure of the price-to-earnings ratio (PE Ratio) using forecasted earnings for the calculation. While the earnings used are just an estimate and are not as reliable as current earnings data, there is still benefit in estimated P/E analysis. The forecasted earnings used in the formula can either be for the next 12 months or for the next full-year fiscal period.
KenMec Mechanical Engineering Co (ROCO:6125) has a Forward PE Ratio of 25.79 as of Sep. 08, 2026. Forward P/E ratio is the share price dividend by the expected per-share earnings in the next 12 months. View historical data on KenMec Mechanical Engineering Co and its competitors. According to the industry distribution chart, KenMec Mechanical Engineering Co ranks #955 out of 1301 companies in the Industrial Products industry, placing it in the top 73.4%.
Is KenMec Mechanical Engineering Co's Forward PE Ratio too high?
KenMec Mechanical Engineering Co's current Forward PE Ratio is 25.79. The Industrial Products industry median Forward PE Ratio is 17.08. KenMec Mechanical Engineering Co's value of 25.79 is 51% above this industry median. Based on the distribution chart, KenMec Mechanical Engineering Co ranks #955 out of 1301 companies in the Industrial Products industry, which is below the industry midpoint. Overall, KenMec Mechanical Engineering Co has a GF Score™ of 43/100 and is considered Possible Value Trap, reflecting its overall financial health beyond just this single metric.
How does KenMec Mechanical Engineering Co's Forward PE Ratio compare to GEV and ETN?
According to the Industrial Products industry distribution chart, KenMec Mechanical Engineering Co ranks #955 out of 1301 companies for Forward PE Ratio. This places KenMec Mechanical Engineering Co in the lower half of its industry. The industry median Forward PE Ratio is 17.08. KenMec Mechanical Engineering Co's value of 25.79 is 51% above this benchmark. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Forward PE Ratio for an Industrial Products company?
The median Forward PE Ratio among Industrial Products companies is 17.08, based on 1,301 companies in the industry. Companies in the top quartile (top 25%) have a Forward PE Ratio significantly above this median, while those in the bottom quartile fall well below. However, Forward PE Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. KenMec Mechanical Engineering Co's current Forward PE Ratio of 25.79 is 51% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Forward PE Ratio mean?
A high Forward PE Ratio can signal that a stock is expensive relative to its fundamentals. Forward P/E ratio is the share price dividend by the expected per-share earnings in the next 12 months. View historical data on KenMec Mechanical Engineering Co and its competitors. For the Industrial Products industry, the median Forward PE Ratio is 17.08 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. KenMec Mechanical Engineering Co's current Forward PE Ratio is 25.79. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is KenMec Mechanical Engineering Co stock overvalued right now?
Based on GuruFocus' analysis, KenMec Mechanical Engineering Co (ROCO:6125) is currently considered Possible Value Trap. The stock's GF Value™ is NT$97.98, compared to a current price of NT$50.80 — trading 48.2% below its estimated fair value. The current Forward PE Ratio is 25.79 and 51% above the Industrial Products industry median of 17.08. KenMec Mechanical Engineering Co's overall GF Score™ is 43/100 with 6 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Forward PE Ratio calculated?
Forward PE Ratio is calculated from a company's financial statements. For KenMec Mechanical Engineering Co (ROCO:6125), the current Forward PE Ratio is 25.79 as of Sep. 08, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is KenMec Mechanical Engineering Co (ROCO:6125) Overvalued in 2026?
Based on GuruFocus' analysis, KenMec Mechanical Engineering Co stock appears to be undervalued.
The current stock price of NT$50.80 is trading 48.2% below its estimated GF Value™ of NT$97.98.
GuruFocus considers KenMec Mechanical Engineering Co to be Possible Value Trap.
Key valuation signals for ROCO:6125:
Forward PE Ratio: 25.79
GF Value™: NT$97.98 vs. price of NT$50.80 (48.2% below fair value)
Industry Position: 51% above the Industrial Products median (#955 of 1301)
No single metric tells the full story. See the ROCO:6125 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
KenMec Mechanical Engineering Co Ltd is focusing on the design, machining, manufacturing and trading of industrial machines and steel angle frames; import and export of machinery, hardware, office equipment, and electric machinery; machining, manufacturing and trading of transfer lines, robot production lines, flexible manufacturing systems, automatic conveyors, automatic pallet stackers, automatic warehousing equipment, unmanned trucks, and robotic arms; manufacturing, machining and trading of computer and optical communication products and their components. Its segments are Automation segment, Smart Energy Integration Business, Electronic parts and components segment, SIC Business; and Other segments. The company derives maximum revenue from Automation segment.
43GF Score
Get the complete analysis for ROCO:6125
Forward PE Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
ROCO:6125 has been successfully added to your 
