Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
The historical rank and industry rank for KenMec Mechanical Engineering Co's Return-on-Tangible-Equity or its related term are showing as below:
ROCO:6125'
s Return-on-Tangible-Equity Range Over the Past 10 Years
Min: -10.75 Med: -2.83 Max: 34.33
Current: 0.59
During the past 13 years, KenMec Mechanical Engineering Co's highest Return-on-Tangible-Equity was 34.33%. The lowest was -10.75%. And the median was -2.83%.
ROCO:6125's Return-on-Tangible-Equity is ranked worse than 74.5% of 2973
companies
in the Industrial Products industry
Industry Median: 6.76
vs ROCO:6125: 0.59
KenMec Mechanical Engineering Co (ROCO:6125) Return-on-Tangible-Equity Explanation
Return-on-Tangible-Equity measures the rate of return on the ownership interest (shareholder's tangible equity) of the common stock owners. It measures a firm's efficiency at generating profits from every unit of shareholders' tangible equity (shareholders equity minus intangibles). Return-on-Tangible-Equity shows how well a company uses investment funds to generate earnings growth. Return-on-Tangible-Equitys between 15% and 20% are considered desirable.
Be Aware
Net Income is used.
Because a company can increase its Return-on-Tangible-Equity by having more financial leverage, it is important to watch the leverage ratio when investing in high Return-on-Tangible-Equity companies. Like Return-on-Tangible-Asset, Return-on-Tangible-Equity is calculated with only 12 months data. Fluctuations in company's earnings or business cycles can affect the ratio drastically. It is important to look at the ratio from a long term perspective.
Asset light businesses require very few assets to generate very high earnings. Their Return-on-Tangible-Equitys can be extremely high.
KenMec Mechanical Engineering Co Return-on-Tangible-Equity Related Terms
KenMec Mechanical Engineering Co Return-on-Tangible-Equity Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
KenMec Mechanical Engineering Co Return-on-Tangible-Equity Chart
ROCO:6125 vs GEV, ETN, PH: Return-on-Tangible-Equity Comparison
For the Specialty Industrial Machinery subindustry, KenMec Mechanical Engineering Co's Return-on-Tangible-Equity, along with its competitors' market caps and Return-on-Tangible-Equity data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
KenMec Mechanical Engineering Co Return-on-Tangible-Equity vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, KenMec Mechanical Engineering Co's Return-on-Tangible-Equity distribution charts can be found below:
* The bar in red indicates where KenMec Mechanical Engineering Co's Return-on-Tangible-Equity falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
In the calculation of annual Return-on-Tangible-Equity, the net income of the last fiscal year and the average total shareholder tangible equity over the fiscal year are used. In calculating the quarterly data,
the net income data used here is four times the quarterly (Dec. 2025) net income data.
Return-on-Tangible-Equity is displayed in the 10-year financial page.
What does a Return-on-Tangible-Equity of -0.64% mean?
KenMec Mechanical Engineering Co (ROCO:6125) has a Return-on-Tangible-Equity of -0.64% as of Dec. 2025. Return on tangible equity is the ratio of current-period net income to average two-period tangible equity. View historical data on KenMec Mechanical Engineering Co and its competitors. According to the industry distribution chart, KenMec Mechanical Engineering Co ranks #2215 out of 2973 companies in the Industrial Products industry, placing it in the top 74.5%.
Is KenMec Mechanical Engineering Co's Return-on-Tangible-Equity too high?
KenMec Mechanical Engineering Co's current Return-on-Tangible-Equity is -0.64%. Based on the distribution chart, KenMec Mechanical Engineering Co ranks #2215 out of 2973 companies in the Industrial Products industry, which is below the industry midpoint. Overall, KenMec Mechanical Engineering Co has a GF Score™ of 42/100 and is considered Possible Value Trap, reflecting its overall financial health beyond just this single metric.
How does KenMec Mechanical Engineering Co's Return-on-Tangible-Equity compare to GEV and ETN?
According to the Industrial Products industry distribution chart, KenMec Mechanical Engineering Co ranks #2215 out of 2973 companies for Return-on-Tangible-Equity. This places KenMec Mechanical Engineering Co in the lower half of its industry. The industry median Return-on-Tangible-Equity is 6.76. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Return-on-Tangible-Equity for an Industrial Products company?
The median Return-on-Tangible-Equity among Industrial Products companies is 6.76, based on 2,973 companies in the industry. Companies in the top quartile (top 25%) have a Return-on-Tangible-Equity significantly above this median, while those in the bottom quartile fall well below. However, Return-on-Tangible-Equity should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Return-on-Tangible-Equity mean?
A high Return-on-Tangible-Equity can signal that a stock is expensive relative to its fundamentals. Return on tangible equity is the ratio of current-period net income to average two-period tangible equity. View historical data on KenMec Mechanical Engineering Co and its competitors. For the Industrial Products industry, the median Return-on-Tangible-Equity is 6.76 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. KenMec Mechanical Engineering Co's current Return-on-Tangible-Equity is -0.64%. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is KenMec Mechanical Engineering Co stock overvalued right now?
Based on GuruFocus' analysis, KenMec Mechanical Engineering Co (ROCO:6125) is currently considered Possible Value Trap. The stock's GF Value™ is NT$81.52, compared to a current price of NT$44.30 — trading 45.7% below its estimated fair value. The current Return-on-Tangible-Equity is -0.64%. KenMec Mechanical Engineering Co's overall GF Score™ is 42/100 with 6 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Return-on-Tangible-Equity calculated?
Return-on-Tangible-Equity is calculated from a company's financial statements. For KenMec Mechanical Engineering Co (ROCO:6125), the current Return-on-Tangible-Equity is -0.64% as of Dec. 2025. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is KenMec Mechanical Engineering Co (ROCO:6125) Overvalued in 2026?
Based on GuruFocus' analysis, KenMec Mechanical Engineering Co stock appears to be undervalued.
The current stock price of NT$44.30 is trading 45.7% below its estimated GF Value™ of NT$81.52.
GuruFocus considers KenMec Mechanical Engineering Co to be Possible Value Trap.
Key valuation signals for ROCO:6125:
Return-on-Tangible-Equity: -0.64%
GF Value™: NT$81.52 vs. price of NT$44.30 (45.7% below fair value)
No single metric tells the full story. See the ROCO:6125 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
KenMec Mechanical Engineering Co Business Description
KenMec Mechanical Engineering Co Ltd is focusing on the design, machining, manufacturing and trading of industrial machines and steel angle frames; import and export of machinery, hardware, office equipment, and electric machinery; machining, manufacturing and trading of transfer lines, robot production lines, flexible manufacturing systems, automatic conveyors, automatic pallet stackers, automatic warehousing equipment, unmanned trucks, and robotic arms; manufacturing, machining and trading of computer and optical communication products and their components. Its segments are Automation segment, Smart Energy Integration Business, Electronic parts and components segment, SIC Business; and Other segments. The company derives maximum revenue from Automation segment.
42GF Score
Get the complete analysis for ROCO:6125
Return-on-Tangible-Equity is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
ROCO:6125 has been successfully added to your 
