Metal Coatings (India) (BOM:531810) Piotroski F-Score: 4 (As of Jul. 06, 2026) — 43% Below Median


BOM:531810 Metal Coatings (India) Ltd BOM:531810
75 GF Score
Price ₹50.58
GF Value ₹75.95
Valuation Significantly Undervalued
! 3 Warning Signs
View Full Analysis

What is Metal Coatings (India) Piotroski F-Score?

Metal Coatings (India) BOM:531810 +0.98% 75 Piotroski F-Score is 4 as of Jul. 06, 2026, which is 43% below its 10-year median of 7.00. GuruFocus rates BOM:531810 with a GF Score™ of 75/100 and a GF Value™ of ₹75.95 (Significantly Undervalued). The stock has 3 warning signs investors should review. Among 623 Steel companies, Metal Coatings (India) ranks worse than 63.08% on this metric.

The zones of discrimination were as such:

Good or high score = 7, 8, 9
Bad or low score = 0, 1, 2, 3

Metal Coatings (India) has an F-score of 4 indicating the company's financial situation is typical for a stable company.

The historical rank and industry rank for Metal Coatings (India)'s Piotroski F-Score or its related term are showing as below:

BOM:531810' s Piotroski F-Score Range Over the Past 10 Years
Min: 4   Med: 7   Max: 8
Current: 4

During the past 13 years, the highest Piotroski F-Score of Metal Coatings (India) was 8. The lowest was 4. And the median was 7.

Metal Coatings (India)  (BOM:531810) Piotroski F-Score Explanation

The developer of the system is Joseph D. Piotroski is relatively unknown accounting professor who shuns publicity and rarely gives interviews.

He graduated from the University of Illinois with a B.S. in accounting in 1989, received an M.B.A. from Indiana University in 1994. Five years later, in 1999, after earning a Ph.D. in accounting from the University of Michigan, he became an associate professor of accounting at the University of Chicago.

In 2000, he wrote a research paper called "Value Investing: The Use of Historical Financial Statement Information to Separate Winners from Losers" (pdf).

He wanted to see if he can develop a system (using a simple nine-point scoring system) that can increase the returns of a strategy of investing in low price to book (referred to in the paper as high book to market) value companies.

What he found was something that exceeded his most optimistic expectations.

Buying only those companies that scored highest (8 or 9) on his nine-point scale, or F-Score as he called it, over the 20 year period from 1976 to 1996 led to an average out-performance over the market of 13.4%.

Even more impressive were the results of a strategy of investing in the highest F-Score companies (8 or 9) and shorting companies with the lowest F-Score (0 or 1).

Over the same period from 1976 to 1996 (20 years) this strategy led to an average yearly return of 23%, substantially outperforming the average S&P 500 index return of 15.83% over the same period.


Metal Coatings (India) Piotroski F-Score Related Terms


Metal Coatings (India) Piotroski F-Score Historical Data

* Premium members only.

The historical data trend for Metal Coatings (India)'s Piotroski F-Score can be seen below:

* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD.
* For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.

Metal Coatings (India) Piotroski F-Score Chart

Metal Coatings (India) Annual Data
Trend Mar17 Mar18 Mar19 Mar20 Mar21 Mar22 Mar23 Mar24 Mar25 Mar26
Piotroski F-Score
Get a 7-Day Free Trial Premium Member Only Premium Member Only 5.00 7.00 8.00 5.00 4.00

Metal Coatings (India) Quarterly Data
Jun21 Sep21 Dec21 Mar22 Jun22 Sep22 Dec22 Mar23 Jun23 Sep23 Dec23 Mar24 Jun24 Sep24 Dec24 Mar25 Jun25 Sep25 Dec25 Mar26
Piotroski F-Score Get a 7-Day Free Trial Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only 5.00 0.00 0.00 0.00 4.00

BOM:531810 vs NUE, STLD, RS: Piotroski F-Score Comparison

For the Steel subindustry, Metal Coatings (India)'s Piotroski F-Score, along with its competitors' market caps and Piotroski F-Score data, can be viewed below:

* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.


Metal Coatings (India) Piotroski F-Score vs Steel Industry

For the Steel industry and Basic Materials sector, Metal Coatings (India)'s Piotroski F-Score distribution charts can be found below:

* The bar in red indicates where Metal Coatings (India)'s Piotroski F-Score falls into.


BOM:531810
75GF Score
Metal Coatings (India) Ltd BOM:531810
Piotroski F-Score is just one metric. See GF Score™, valuation, warning signs, and more.
View Full Analysis

How is the Piotroski F-Score calculated?

* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD.
* For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.

This Year (Mar26) TTM:Last Year (Mar25) TTM:
Net Income was ₹24 Mil.
Cash Flow from Operations was ₹-12 Mil.
Revenue was ₹1,490 Mil.
Gross Profit was ₹293 Mil.
Average Total Assets from the begining of this year (Mar25)
to the end of this year (Mar26) was (530.626 + 563.668) / 2 = ₹547.147 Mil.
Total Assets at the begining of this year (Mar25) was ₹531 Mil.
Long-Term Debt & Capital Lease Obligation was ₹0 Mil.
Total Current Assets was ₹500 Mil.
Total Current Liabilities was ₹111 Mil.
Net Income was ₹24 Mil.

Revenue was ₹1,603 Mil.
Gross Profit was ₹306 Mil.
Average Total Assets from the begining of last year (Mar24)
to the end of last year (Mar25) was (477.893 + 530.626) / 2 = ₹504.2595 Mil.
Total Assets at the begining of last year (Mar24) was ₹478 Mil.
Long-Term Debt & Capital Lease Obligation was ₹0 Mil.
Total Current Assets was ₹462 Mil.
Total Current Liabilities was ₹98 Mil.

*Note: If the latest quarterly/semi-annual/annual total assets data is 0, then we will use previous quarterly/semi-annual/annual data for all the items in the balance sheet.

Profitability

Question 1. Return on Assets (ROA)

Net income before extraordinary items for the year divided by Total Assets at the beginning of the year.

Score 1 if positive, 0 if negative.

Metal Coatings (India)'s current Net Income (TTM) was 24. ==> Positive ==> Score 1.

Question 2. Cash Flow Return on Assets (CFROA)

Net cash flow from operating activities (operating cash flow) divided by Total Assets at the beginning of the year.

Score 1 if positive, 0 if negative.

Metal Coatings (India)'s current Cash Flow from Operations (TTM) was -12. ==> Negative ==> Score 0.

Question 3. Change in Return on Assets

Compare this year's return on assets (1) to last year's return on assets.

Score 1 if it's higher, 0 if it's lower.

ROA (This Year)=Net Income/Total Assets (Mar25)
=23.997/530.626
=0.04522394

ROA (Last Year)=Net Income/Total Assets (Mar24)
=23.696/477.893
=0.04958432

Metal Coatings (India)'s return on assets of this year was 0.04522394. Metal Coatings (India)'s return on assets of last year was 0.04958432. ==> Last year is higher ==> Score 0.

Question 4. Quality of Earnings (Accrual)

Compare Cash flow return on assets (2) to return on assets (1)

Score 1 if CFROA > ROA, 0 if CFROA <= ROA.

Metal Coatings (India)'s current Net Income (TTM) was 24. Metal Coatings (India)'s current Cash Flow from Operations (TTM) was -12. ==> -12 <= 24 ==> CFROA <= ROA ==> Score 0.

Funding

Question 5. Change in Gearing or Leverage

Compare this year's gearing (long-term debt divided by average total assets) to last year's gearing.

Score 0 if this year's gearing is higher, 1 otherwise.

Gearing (This Year: Mar26)=Long-Term Debt & Capital Lease Obligation/Average Total Assets from Mar25 to Mar26
=0/547.147
=0

Gearing (Last Year: Mar25)=Long-Term Debt & Capital Lease Obligation/Average Total Assets from Mar24 to Mar25
=0/504.2595
=0

Metal Coatings (India)'s gearing of this year was 0. Metal Coatings (India)'s gearing of last year was 0. ==> This year is lower or equal to last year. ==> Score 1.

Question 6. Change in Working Capital (Liquidity)

Compare this year's current ratio (current assets divided by current liabilities) to last year's current ratio.

Score 1 if this year's current ratio is higher, 0 if it's lower

Current Ratio (This Year: Mar26)=Total Current Assets/Total Current Liabilities
=500.095/111.404
=4.48902194

Current Ratio (Last Year: Mar25)=Total Current Assets/Total Current Liabilities
=462.265/97.693
=4.73181292

Metal Coatings (India)'s current ratio of this year was 4.48902194. Metal Coatings (India)'s current ratio of last year was 4.73181292. ==> Last year's current ratio is higher ==> Score 0.

Question 7. Change in Shares in Issue

Compare the number of shares in issue this year, to the number in issue last year.

Score 0 if there is larger number of shares in issue this year, 1 otherwise.

Metal Coatings (India)'s number of shares in issue this year was 7.316. Metal Coatings (India)'s number of shares in issue last year was 7.336. ==> There is smaller number of shares in issue this year, or the same. ==> Score 1.

Efficiency

Question 8. Change in Gross Margin

Compare this year's gross margin (Gross Profit divided by sales) to last year's.

Score 1 if this year's gross margin is higher, 0 if it's lower.

Gross Margin (This Year: TTM)=Gross Profit/Revenue
=293.108/1489.755
=0.19674913

Gross Margin (Last Year: TTM)=Gross Profit/Revenue
=306.424/1602.502
=0.19121599

Metal Coatings (India)'s gross margin of this year was 0.19674913. Metal Coatings (India)'s gross margin of last year was 0.19121599. ==> This year's gross margin is higher. ==> Score 1.

Question 9. Change in asset turnover

Compare this year's asset turnover (total sales for the year divided by total assets at the beginning of the year) to last year's asset turnover ratio.

Score 1 if this year's asset turnover ratio is higher, 0 if it's lower

Asset Turnover (This Year)=Revenue/Total Assets at the Beginning of This Year (Mar25)
=1489.755/530.626
=2.80754241

Asset Turnover (Last Year)=Revenue/Total Assets at the Beginning of Last Year (Mar24)
=1602.502/477.893
=3.35326527

Metal Coatings (India)'s asset turnover of this year was 2.80754241. Metal Coatings (India)'s asset turnover of last year was 3.35326527. ==> Last year's asset turnover is higher ==> Score 0.

Evaluation

Piotroski F-Score= Que. 1+ Que. 2+ Que. 3+Que. 4+Que. 5+Que. 6+Que. 7+Que. 8+Que. 9
=1+0+0+0+1+0+1+1+0
=4

Good or high score = 7, 8, 9
Bad or low score = 0, 1, 2, 3

Metal Coatings (India) has an F-score of 4 indicating the company's financial situation is typical for a stable company.

Frequently Asked Questions Learn more about Piotroski F-Score →
What does a Piotroski F-Score of 4 mean?
Metal Coatings (India) (BOM:531810) has a Piotroski F-Score of 4 as of Jul. 06, 2026. The Piotroski F-score grades a company's business operating strength from 0-9. View historical data on Metal Coatings (India) and its competitors. This is 43% below median its historical median of 7.00. Over the past decade, Metal Coatings (India)'s Piotroski F-Score has ranged from 4.00 to 8.00. According to the industry distribution chart, Metal Coatings (India) ranks #393 out of 623 companies in the Steel industry, placing it in the top 63.1%.
Is Metal Coatings (India)'s Piotroski F-Score too high?
Metal Coatings (India)'s current Piotroski F-Score of 4 is 43% below median its 10-year median of 7.00. Over the past 10 years, this metric has ranged from a low of 4.00 to a high of 8.00. The Steel industry median Piotroski F-Score is 5.00. Metal Coatings (India)'s value of 4 is 20% below this industry median. Based on the distribution chart, Metal Coatings (India) ranks #393 out of 623 companies in the Steel industry, which is below the industry midpoint. Overall, Metal Coatings (India) has a GF Score™ of 75/100 and is considered Significantly Undervalued, reflecting its overall financial health beyond just this single metric.
How does Metal Coatings (India)'s Piotroski F-Score compare to NUE and STLD?
According to the Steel industry distribution chart, Metal Coatings (India) ranks #393 out of 623 companies for Piotroski F-Score. This places Metal Coatings (India) in the lower half of its industry. The industry median Piotroski F-Score is 5.00. Metal Coatings (India)'s value of 4 is 20% below this benchmark. Historically, Metal Coatings (India)'s own Piotroski F-Score has ranged from 4.00 to 8.00 over the past decade. While the company's 10-year median is 7.00 vs. the industry median of 5.00, Metal Coatings (India) has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Piotroski F-Score for a Steel company?
The median Piotroski F-Score among Steel companies is 5.00, based on 623 companies in the industry. Companies in the top quartile (top 25%) have a Piotroski F-Score significantly above this median, while those in the bottom quartile fall well below. However, Piotroski F-Score should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Metal Coatings (India)'s current Piotroski F-Score of 4 is 20% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Piotroski F-Score mean?
A high Piotroski F-Score can signal that a stock is expensive relative to its fundamentals. The Piotroski F-score grades a company's business operating strength from 0-9. View historical data on Metal Coatings (India) and its competitors. For the Steel industry, the median Piotroski F-Score is 5.00 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Metal Coatings (India)'s current Piotroski F-Score is 4, which is 43% below median its own 10-year median of 7.00. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Metal Coatings (India) stock overvalued right now?
Based on GuruFocus' analysis, Metal Coatings (India) (BOM:531810) is currently considered Significantly Undervalued. The stock's GF Value™ is ₹75.95, compared to a current price of ₹50.58 — trading 33.4% below its estimated fair value. The current Piotroski F-Score is 4, which is 43% below median its 10-year median of 7.00 and 20% below the Steel industry median of 5.00. Metal Coatings (India)'s overall GF Score™ is 75/100 with 3 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Piotroski F-Score calculated?
Piotroski F-Score is calculated from a company's financial statements. For Metal Coatings (India) (BOM:531810), the current Piotroski F-Score is 4 as of Jul. 06, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.

Is Metal Coatings (India) (BOM:531810) Overvalued in 2026?

Based on GuruFocus' analysis, Metal Coatings (India) stock appears to be undervalued. The current stock price of ₹50.58 is trading 33.4% below its estimated GF Value™ of ₹75.95. GuruFocus considers Metal Coatings (India) to be Significantly Undervalued.

Key valuation signals for BOM:531810:

  • Piotroski F-Score: 4 (43% below median its 10-year median of 7.00)
  • GF Value™: ₹75.95 vs. price of ₹50.58 (33.4% below fair value)
  • GF Score™: 75/100 with 3 warning signs
  • Industry Position: 20% below the Steel median (#393 of 623)

No single metric tells the full story. See the BOM:531810 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.


Metal Coatings (India) Business Description

Address 912, Hemkunt Chambers, 89, Nehru Place, New Delhi, IND, 110019
Metal Coatings (India) Ltd is an Indian based company engaged in the manufacturing and sale of steel products. The company operates in single segment, i.e. iron & steel. Its products include cold rolled steel strips, hot rolled pickled oiled coils/strips, cold rolled flat wire strips, and galvanized wire and galvanized strips. These products are used by a wide range of user industries such as auto component, white goods and electrical equipment, and others.
75GF Score

Get the complete analysis for BOM:531810

Piotroski F-Score is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.

₹50.58
Price
₹75.95
GF Value