Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Metal Coatings (India)BOM:531810 -3.32%72 5-Year Yield-on-Cost % is 2.01 as of Sep. 14, 2026, which is 10% below its 10-year median of 2.24. GuruFocus rates BOM:531810 with a GF Score™ of 72/100 and a GF Value™ of ₹74.06 (Possible Value Trap). The stock has 5 warning signs investors should review. Among 313 Steel companies, Metal Coatings (India) ranks worse than 64.54% on this metric.
Metal Coatings (India)'s yield on cost for the quarter that ended in Jun. 2026 was 2.01.
The historical rank and industry rank for Metal Coatings (India)'s 5-Year Yield-on-Cost % or its related term are showing as below:
BOM:531810'
s 5-Year Yield-on-Cost % Range Over the Past 10 Years
Min: 1.42 Med: 2.24 Max: 5.55
Current: 2.01
During the past 13 years, Metal Coatings (India)'s highest Yield on Cost was 5.55. The lowest was 1.42. And the median was 2.24.
BOM:531810's 5-Year Yield-on-Cost % is ranked worse than 64.54% of 313
companies
in the Steel industry
Industry Median: 3.41
vs BOM:531810: 2.01
Metal Coatings (India) (BOM:531810) 5-Year Yield-on-Cost % Explanation
Of course the risk here is that the company may not raise its dividends as it did before. The key is to select the companies that can consistently raise its dividends. Usually companies with long history of raising dividends tend to do so.
Metal Coatings (India) 5-Year Yield-on-Cost % Related Terms
BOM:531810 vs NUE, STLD, RS: 5-Year Yield-on-Cost % Comparison
For the Steel subindustry, Metal Coatings (India)'s 5-Year Yield-on-Cost %, along with its competitors' market caps and 5-Year Yield-on-Cost % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Metal Coatings (India) 5-Year Yield-on-Cost % vs Steel Industry
For the Steel industry and Basic Materials sector, Metal Coatings (India)'s 5-Year Yield-on-Cost % distribution charts can be found below:
* The bar in red indicates where Metal Coatings (India)'s 5-Year Yield-on-Cost % falls into.
Metal Coatings (India) 5-Year Yield-on-Cost % Calculation
Dividend Yield % and dividend growth of a stock is an important factor for income investors. But if company A raises its dividend constantly faster than company B, company A's future dividend yield might be much higher than Company B's even if their yields are the same now and their stock prices do not change.
Yield on Cost assumes that you buy and the stock today, and hold it for 5 years. If the company raises it dividends at the same rate as it did over the past 5 years, the dividends investors receive annually in 5 years relative to the stock price today.
Metal Coatings (India) (BOM:531810) has a 5-Year Yield-on-Cost % of 2.01 as of Sep. 14, 2026. 5-Year Yield on Cost measures the expected yield based on a company's current yield and 5-year dividend growth. View historical data on Metal Coatings (India) and its competitors. This is 10% below median its historical median of 2.24. Over the past decade, Metal Coatings (India)'s 5-Year Yield-on-Cost % has ranged from 1.42 to 5.55. According to the industry distribution chart, Metal Coatings (India) ranks #202 out of 313 companies in the Steel industry, placing it in the top 64.5%.
Is Metal Coatings (India)'s 5-Year Yield-on-Cost % too high?
Metal Coatings (India)'s current 5-Year Yield-on-Cost % of 2.01 is 10% below median its 10-year median of 2.24. Over the past 10 years, this metric has ranged from a low of 1.42 to a high of 5.55. The Steel industry median 5-Year Yield-on-Cost % is 3.41. Metal Coatings (India)'s value of 2.01 is 41.1% below this industry median. Based on the distribution chart, Metal Coatings (India) ranks #202 out of 313 companies in the Steel industry, which is below the industry midpoint. Overall, Metal Coatings (India) has a GF Score™ of 72/100 and is considered Possible Value Trap, reflecting its overall financial health beyond just this single metric.
How does Metal Coatings (India)'s 5-Year Yield-on-Cost % compare to NUE and STLD?
According to the Steel industry distribution chart, Metal Coatings (India) ranks #202 out of 313 companies for 5-Year Yield-on-Cost %. This places Metal Coatings (India) in the lower half of its industry. The industry median 5-Year Yield-on-Cost % is 3.41. Metal Coatings (India)'s value of 2.01 is 41.1% below this benchmark. Historically, Metal Coatings (India)'s own 5-Year Yield-on-Cost % has ranged from 1.42 to 5.55 over the past decade. While the company's 10-year median is 2.24 vs. the industry median of 3.41, Metal Coatings (India) has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good 5-Year Yield-on-Cost % for a Steel company?
The median 5-Year Yield-on-Cost % among Steel companies is 3.41, based on 313 companies in the industry. Companies in the top quartile (top 25%) have a 5-Year Yield-on-Cost % significantly above this median, while those in the bottom quartile fall well below. However, 5-Year Yield-on-Cost % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Metal Coatings (India)'s current 5-Year Yield-on-Cost % of 2.01 is 41.1% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high 5-Year Yield-on-Cost % mean?
A high 5-Year Yield-on-Cost % can signal that a stock is expensive relative to its fundamentals. 5-Year Yield on Cost measures the expected yield based on a company's current yield and 5-year dividend growth. View historical data on Metal Coatings (India) and its competitors. For the Steel industry, the median 5-Year Yield-on-Cost % is 3.41 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Metal Coatings (India)'s current 5-Year Yield-on-Cost % is 2.01, which is 10% below median its own 10-year median of 2.24. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Metal Coatings (India) stock overvalued right now?
Based on GuruFocus' analysis, Metal Coatings (India) (BOM:531810) is currently considered Possible Value Trap. The stock's GF Value™ is ₹74.06, compared to a current price of ₹49.79 — trading 32.8% below its estimated fair value. The current 5-Year Yield-on-Cost % is 2.01, which is 10% below median its 10-year median of 2.24 and 41.1% below the Steel industry median of 3.41. Metal Coatings (India)'s overall GF Score™ is 72/100 with 5 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is 5-Year Yield-on-Cost % calculated?
5-Year Yield-on-Cost % is calculated from a company's financial statements. For Metal Coatings (India) (BOM:531810), the current 5-Year Yield-on-Cost % is 2.01 as of Sep. 14, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Metal Coatings (India) (BOM:531810) Overvalued in 2026?
Based on GuruFocus' analysis, Metal Coatings (India) stock appears to be undervalued.
The current stock price of ₹49.79 is trading 32.8% below its estimated GF Value™ of ₹74.06.
GuruFocus considers Metal Coatings (India) to be Possible Value Trap.
Key valuation signals for BOM:531810:
5-Year Yield-on-Cost %: 2.01 (10% below median its 10-year median of 2.24)
GF Value™: ₹74.06 vs. price of ₹49.79 (32.8% below fair value)
Industry Position: 41.1% below the Steel median (#202 of 313)
No single metric tells the full story. See the BOM:531810 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Metal Coatings (India) Ltd is an Indian based company engaged in the manufacturing and sale of steel products. The company operates in single segment, i.e. iron & steel. Its products include cold rolled steel strips, hot rolled pickled oiled coils/strips, cold rolled flat wire strips, and galvanized wire and galvanized strips. These products are used by a wide range of user industries such as auto component, white goods and electrical equipment, and others.
72GF Score
Get the complete analysis for BOM:531810
5-Year Yield-on-Cost % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
BOM:531810 has been successfully added to your 
