Aperam (HAM:7AA) Beneish M-Score: -2.57 (As of Jun. 26, 2026)


HAM:7AA Aperam SA HAM:7AA
84 GF Score
Price €44.32
GF Value €26.42
Valuation Significantly Overvalued
! 11 Warning Signs
View Full Analysis

What is Aperam Beneish M-Score?

Aperam HAM:7AA -0.89% 84 Beneish M-Score is -2.57 as of Jun. 26, 2026. GuruFocus rates HAM:7AA with a GF Score™ of 84/100 and a GF Value™ of €26.42 (Significantly Overvalued). The stock has 11 warning signs investors should review. Among 592 Steel companies, Aperam ranks better than 55.41% on this metric.

The zones of discrimination for M-Score is as such:

An M-Score of equal or less than -1.78 suggests that the company is unlikely to be a manipulator.
An M-Score of greater than -1.78 signals that the company is likely to be a manipulator.

Good Sign:

Beneish M-Score -2.57 no higher than -1.78, which implies that the company is unlikely to be a manipulator.

The historical rank and industry rank for Aperam's Beneish M-Score or its related term are showing as below:

HAM:7AA' s Beneish M-Score Range Over the Past 10 Years
Min: -2.8   Med: -2.54   Max: -1.56
Current: -2.57

During the past 13 years, the highest Beneish M-Score of Aperam was -1.56. The lowest was -2.80. And the median was -2.54.


Aperam Beneish M-Score Historical Data

* Premium members only.

The historical data trend for Aperam's Beneish M-Score can be seen below:

* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD.
* For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.

Aperam Beneish M-Score Chart

Aperam Annual Data
Trend Dec16 Dec17 Dec18 Dec19 Dec20 Dec21 Dec22 Dec23 Dec24 Dec25
Beneish M-Score
Get a 7-Day Free Trial Premium Member Only Premium Member Only -1.56 -1.94 -1.80 -2.69 -2.57

Aperam Quarterly Data
Jun21 Sep21 Dec21 Mar22 Jun22 Sep22 Dec22 Mar23 Jun23 Sep23 Dec23 Mar24 Jun24 Sep24 Dec24 Mar25 Jun25 Sep25 Dec25 Mar26
Beneish M-Score Get a 7-Day Free Trial Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only 0.00 0.00 0.00 -2.57 0.00

HAM:7AA vs NUE, STLD, RS: Beneish M-Score Comparison

For the Steel subindustry, Aperam's Beneish M-Score, along with its competitors' market caps and Beneish M-Score data, can be viewed below:

* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.


Aperam Beneish M-Score vs Steel Industry

For the Steel industry and Basic Materials sector, Aperam's Beneish M-Score distribution charts can be found below:

* The bar in red indicates where Aperam's Beneish M-Score falls into.


HAM:7AA
84GF Score
Aperam SA HAM:7AA
Beneish M-Score is just one metric. See GF Score™, valuation, warning signs, and more.
View Full Analysis

Aperam Beneish M-Score Calculation

The M-score was created by Professor Messod Beneish. Instead of measuring the bankruptcy risk (Altman Z-Score) or business trend (Piotroski F-Score), M-score can be used to detect the risk of earnings manipulation. This is the original research paper on M-score.

The M-Score Variables:

The M-score of Aperam for today is based on a combination of the following eight different indices:

M=-4.84+0.92 * DSRI+0.528 * GMI+0.404 * AQI+0.892 * SGI+0.115 * DEPI
=-4.84+0.92 * 1.1654+0.528 * 1.2799+0.404 * 1.0269+0.892 * 0.972+0.115 * 0.9719
-0.172 * SGAI+4.679 * TATA-0.327 * LVGI
-0.172 * 1.0552+4.679 * -0.066559-0.327 * 1.1577
=-2.57

* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD.
* For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.

This Year (Dec25) TTM:Last Year (Dec24) TTM:
Total Receivables was €452 Mil.
Revenue was €6,080 Mil.
Gross Profit was €341 Mil.
Total Current Assets was €2,968 Mil.
Total Assets was €6,205 Mil.
Property, Plant and Equipment(Net PPE) was €2,144 Mil.
Depreciation, Depletion and Amortization(DDA) was €259 Mil.
Selling, General, & Admin. Expense(SGA) was €120 Mil.
Total Current Liabilities was €1,645 Mil.
Long-Term Debt & Capital Lease Obligation was €1,070 Mil.
Net Income was €9 Mil.
Gross Profit was €0 Mil.
Cash Flow from Operations was €422 Mil.
Total Receivables was €399 Mil.
Revenue was €6,255 Mil.
Gross Profit was €449 Mil.
Total Current Assets was €2,916 Mil.
Total Assets was €5,882 Mil.
Property, Plant and Equipment(Net PPE) was €1,957 Mil.
Depreciation, Depletion and Amortization(DDA) was €229 Mil.
Selling, General, & Admin. Expense(SGA) was €117 Mil.
Total Current Liabilities was €1,707 Mil.
Long-Term Debt & Capital Lease Obligation was €516 Mil.




1. DSRI = Days Sales in Receivables Index

Measured as the ratio of Revenue in Total Receivables in year t to year t-1.

A large increase in DSR could be indicative of revenue inflation.

DSRI=(Receivables_t / Revenue_t) / (Receivables_t-1 / Revenue_t-1)
=(452 / 6080) / (399 / 6255)
=0.074342 / 0.063789
=1.1654

2. GMI = Gross Margin Index

Measured as the ratio of gross margin in year t-1 to gross margin in year t.

Gross margin has deteriorated when this index is above 1. A firm with poorer prospects is more likely to manipulate earnings.

GMI=GrossMargin_t-1 / GrossMargin_t
=(GrossProfit_t-1 / Revenue_t-1) / (GrossProfit_t / Revenue_t)
=(449 / 6255) / (341 / 6080)
=0.071783 / 0.056086
=1.2799

3. AQI = Asset Quality Index

AQI is the ratio of asset quality in year t to year t-1.

Asset quality is measured as the ratio of non-current assets other than Property, Plant and Equipment to Total Assets.

AQI=(1 - (CurrentAssets_t + PPE_t) / TotalAssets_t) / (1 - (CurrentAssets_t-1 + PPE_t-1) / TotalAssets_t-1)
=(1 - (2968 + 2144) / 6205) / (1 - (2916 + 1957) / 5882)
=0.176148 / 0.17154
=1.0269

4. SGI = Sales Growth Index

Ratio of Revenue in year t to sales in year t-1.

Sales growth is not itself a measure of manipulation. However, growth companies are likely to find themselves under pressure to manipulate in order to keep up appearances.

SGI=Sales_t / Sales_t-1
=Revenue_t / Revenue_t-1
=6080 / 6255
=0.972

5. DEPI = Depreciation Index

Measured as the ratio of the rate of Depreciation, Depletion and Amortization in year t-1 to the corresponding rate in year t.

DEPI greater than 1 indicates that assets are being depreciated at a slower rate. This suggests that the firm might be revising useful asset life assumptions upwards, or adopting a new method that is income friendly.

DEPI=(Depreciation_t-1 / (Depreciaton_t-1 + PPE_t-1)) / (Depreciation_t / (Depreciaton_t + PPE_t))
=(229 / (229 + 1957)) / (259 / (259 + 2144))
=0.104758 / 0.107782
=0.9719

Note: If the Depreciation, Depletion and Amortization data is not available, we assume that the depreciation rate is constant and set the Depreciation Index to 1.

6. SGAI = Sales, General and Administrative expenses Index

The ratio of Selling, General, & Admin. Expense(SGA) to Sales in year t relative to year t-1.

SGA expenses index > 1 means that the company is becoming less efficient in generate sales.

SGAI=(SGA_t / Sales_t) / (SGA_t-1 /Sales_t-1)
=(120 / 6080) / (117 / 6255)
=0.019737 / 0.018705
=1.0552

7. LVGI = Leverage Index

The ratio of total debt to Total Assets in year t relative to yeat t-1.

An LVGI > 1 indicates an increase in leverage

LVGI=((LTD_t + CurrentLiabilities_t) / TotalAssets_t) / ((LTD_t-1 + CurrentLiabilities_t-1) / TotalAssets_t-1)
=((1070 + 1645) / 6205) / ((516 + 1707) / 5882)
=0.43755 / 0.377933
=1.1577

8. TATA = Total Accruals to Total Assets

Total accruals calculated as the change in working capital accounts other than cash less depreciation.

TATA=(IncomefromContinuingOperations_t - CashFlowsfromOperations_t) / TotalAssets_t
=(NetIncome_t - NonOperatingIncome_t - CashFlowsfromOperations_t) / TotalAssets_t
=(9 - 0 - 422) / 6205
=-0.066559

An M-Score of equal or less than -1.78 suggests that the company is unlikely to be a manipulator. An M-Score of greater than -1.78 signals that the company is likely to be a manipulator.

Aperam has a M-score of -2.57 suggests that the company is unlikely to be a manipulator.

Frequently Asked Questions Learn more about Beneish M-Score →
What does a Beneish M-Score of -2.57 mean?
Aperam (HAM:7AA) has a Beneish M-Score of -2.57 as of Jun. 26, 2026. The Beneish M-score measures the likelihood of earnings manipulation. View historical data on Aperam and its competitors. According to the industry distribution chart, Aperam ranks #264 out of 592 companies in the Steel industry, placing it in the top 44.6%.
Is Aperam's Beneish M-Score too high?
Aperam's current Beneish M-Score is -2.57. Based on the distribution chart, Aperam ranks #264 out of 592 companies in the Steel industry, which is above the industry midpoint. Overall, Aperam has a GF Score™ of 84/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Aperam's Beneish M-Score compare to NUE and STLD?
According to the Steel industry distribution chart, Aperam ranks #264 out of 592 companies for Beneish M-Score. This puts Aperam in the upper half of its industry. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Beneish M-Score for a Steel company?
A good Beneish M-Score depends on the Steel industry context. However, Beneish M-Score should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Beneish M-Score mean?
A high Beneish M-Score can signal that a stock is expensive relative to its fundamentals. The Beneish M-score measures the likelihood of earnings manipulation. View historical data on Aperam and its competitors. Aperam's current Beneish M-Score is -2.57. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Aperam stock overvalued right now?
Based on GuruFocus' analysis, Aperam (HAM:7AA) is currently considered Significantly Overvalued. The stock's GF Value™ is €26.42, compared to a current price of €44.32 — trading 67.8% above its estimated fair value. The current Beneish M-Score is -2.57. Aperam's overall GF Score™ is 84/100 with 11 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Beneish M-Score calculated?
Beneish M-Score is calculated from a company's financial statements. For Aperam (HAM:7AA), the current Beneish M-Score is -2.57 as of Jun. 26, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.

Is Aperam (HAM:7AA) Overvalued in 2026?

Based on GuruFocus' analysis, Aperam stock appears to be overvalued. The current stock price of €44.32 is trading 67.8% above its estimated GF Value™ of €26.42. GuruFocus considers Aperam to be Significantly Overvalued.

Key valuation signals for HAM:7AA:

  • Beneish M-Score: -2.57
  • GF Value™: €26.42 vs. price of €44.32 (67.8% above fair value)
  • GF Score™: 84/100 with 11 warning signs

No single metric tells the full story. See the HAM:7AA stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.


Aperam Business Description

Address 24-26 Boulevard d’Avranches, Luxembourg, LUX, 1160
Aperam SA is a Luxembourg-based stainless and specialty steel producer. The company operates through four segments. Its Stainless and Electrical Steel segment, which generates the majority of revenue, produces a wide range of stainless and electrical steel products for diverse industries. The Services and Solutions segment markets the company's products and provides customized steel transformation services; the Alloys and Specialties segment produces nickel alloys and certain specific stainless steels; and the Recycling & Renewables segment collects, trades, processes, and recycles stainless steel scrap and high-performance alloys. Geographically, the company generates maximum revenue from Europe, and the rest from the Americas, Asia, and Africa.
84GF Score

Get the complete analysis for HAM:7AA

Beneish M-Score is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.

€44.32
Price
€26.42
GF Value