Vedanta Aluminium Metal (NSE:VAML) Beneish M-Score: 0.00 (As of Jun. 29, 2026)


NSE:VAML Vedanta Aluminium Metal Ltd NSE:VAML
7 GF Score
Price ₹442.82
View Full Analysis

What is Vedanta Aluminium Metal Beneish M-Score?

Vedanta Aluminium Metal NSE:VAML -4.39% 7 Beneish M-Score is 0.00 as of Jun. 29, 2026. GuruFocus rates NSE:VAML with a GF Score™ of 7/100. Among 684 Metals & Mining companies, Vedanta Aluminium Metal ranks worse than 146198.68% on this metric.

The zones of discrimination for M-Score is as such:

An M-Score of equal or less than -1.78 suggests that the company is unlikely to be a manipulator.
An M-Score of greater than -1.78 signals that the company is likely to be a manipulator.

The historical rank and industry rank for Vedanta Aluminium Metal's Beneish M-Score or its related term are showing as below:

During the past 3 years, the highest Beneish M-Score of Vedanta Aluminium Metal was 0.00. The lowest was 0.00. And the median was 0.00.

Vedanta Aluminium Metal Beneish M-Score Historical Data

* Premium members only.

The historical data trend for Vedanta Aluminium Metal's Beneish M-Score can be seen below:

* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD.
* For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.

Vedanta Aluminium Metal Beneish M-Score Chart

Vedanta Aluminium Metal Annual Data
Trend Mar24 Mar25 Mar26
Beneish M-Score
0.00 0.00 0.00

Vedanta Aluminium Metal Quarterly Data
Mar24 Mar25 Mar26
Beneish M-Score 0.00 0.00 0.00

NSE:VAML vs AA: Beneish M-Score Comparison

For the Aluminum subindustry, Vedanta Aluminium Metal's Beneish M-Score, along with its competitors' market caps and Beneish M-Score data, can be viewed below:

* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.

Vedanta Aluminium Metal Beneish M-Score vs Metals & Mining Industry

For the Metals & Mining industry and Basic Materials sector, Vedanta Aluminium Metal's Beneish M-Score distribution charts can be found below:

* The bar in red indicates where Vedanta Aluminium Metal's Beneish M-Score falls into.


NSE:VAML
7GF Score
Vedanta Aluminium Metal Ltd NSE:VAML
Beneish M-Score is just one metric. See GF Score™, valuation, warning signs, and more.
View Full Analysis

Vedanta Aluminium Metal Beneish M-Score Calculation

The M-score was created by Professor Messod Beneish. Instead of measuring the bankruptcy risk (Altman Z-Score) or business trend (Piotroski F-Score), M-score can be used to detect the risk of earnings manipulation. This is the original research paper on M-score.

The M-Score Variables:

The M-score of Vedanta Aluminium Metal for today is based on a combination of the following eight different indices:

M=-4.84+0.92 * DSRI+0.528 * GMI+0.404 * AQI+0.892 * SGI+0.115 * DEPI
=-4.84+0.92 * +0.528 * +0.404 * +0.892 * +0.115 *
-0.172 * SGAI+4.679 * TATA-0.327 * LVGI
-0.172 * +4.679 * -0.327 *
=

* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD.
* For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.

This Year (Mar26) TTM:Last Year (Mar25) TTM:
Total Receivables was ₹0.00 Mil.
Revenue was ₹0.00 Mil.
Gross Profit was ₹0.00 Mil.
Total Current Assets was ₹0.18 Mil.
Total Assets was ₹0.19 Mil.
Property, Plant and Equipment(Net PPE) was ₹0.00 Mil.
Depreciation, Depletion and Amortization(DDA) was ₹0.00 Mil.
Selling, General, & Admin. Expense(SGA) was ₹0.18 Mil.
Total Current Liabilities was ₹0.93 Mil.
Long-Term Debt & Capital Lease Obligation was ₹0.00 Mil.
Net Income was ₹-0.37 Mil.
Gross Profit was ₹0.00 Mil.
Cash Flow from Operations was ₹-0.24 Mil.
 Total Receivables was ₹0.00 Mil.
Revenue was ₹0.00 Mil.
Gross Profit was ₹0.00 Mil.
Total Current Assets was ₹0.14 Mil.
Total Assets was ₹0.15 Mil.
Property, Plant and Equipment(Net PPE) was ₹0.00 Mil.
Depreciation, Depletion and Amortization(DDA) was ₹0.00 Mil.
Selling, General, & Admin. Expense(SGA) was ₹0.12 Mil.
Total Current Liabilities was ₹0.52 Mil.
Long-Term Debt & Capital Lease Obligation was ₹0.00 Mil.

1. DSRI = Days Sales in Receivables Index

Measured as the ratio of Revenue in Total Receivables in year t to year t-1.

A large increase in DSR could be indicative of revenue inflation.

DSRI=(Receivables_t / Revenue_t) / (Receivables_t-1 / Revenue_t-1)
=(0 / 0) / (0 / 0)
= /
=

2. GMI = Gross Margin Index

Measured as the ratio of gross margin in year t-1 to gross margin in year t.

Gross margin has deteriorated when this index is above 1. A firm with poorer prospects is more likely to manipulate earnings.

GMI=GrossMargin_t-1 / GrossMargin_t
=(GrossProfit_t-1 / Revenue_t-1) / (GrossProfit_t / Revenue_t)
=(0 / 0) / (0 / 0)
= /
=

3. AQI = Asset Quality Index

AQI is the ratio of asset quality in year t to year t-1.

Asset quality is measured as the ratio of non-current assets other than Property, Plant and Equipment to Total Assets.

AQI=(1 - (CurrentAssets_t + PPE_t) / TotalAssets_t) / (1 - (CurrentAssets_t-1 + PPE_t-1) / TotalAssets_t-1)
=(1 - (0.18 + 0) / 0.19) / (1 - (0.136 + 0) / 0.146)
=0.052632 / 0.068493
=

4. SGI = Sales Growth Index

Ratio of Revenue in year t to sales in year t-1.

Sales growth is not itself a measure of manipulation. However, growth companies are likely to find themselves under pressure to manipulate in order to keep up appearances.

SGI=Sales_t / Sales_t-1
=Revenue_t / Revenue_t-1
=0 / 0
=

5. DEPI = Depreciation Index

Measured as the ratio of the rate of Depreciation, Depletion and Amortization in year t-1 to the corresponding rate in year t.

DEPI greater than 1 indicates that assets are being depreciated at a slower rate. This suggests that the firm might be revising useful asset life assumptions upwards, or adopting a new method that is income friendly.

DEPI=(Depreciation_t-1 / (Depreciaton_t-1 + PPE_t-1)) / (Depreciation_t / (Depreciaton_t + PPE_t))
=(0 / (0 + 0)) / (0 / (0 + 0))
= /
=

Note: If the Depreciation, Depletion and Amortization data is not available, we assume that the depreciation rate is constant and set the Depreciation Index to 1.

6. SGAI = Sales, General and Administrative expenses Index

The ratio of Selling, General, & Admin. Expense(SGA) to Sales in year t relative to year t-1.

SGA expenses index > 1 means that the company is becoming less efficient in generate sales.

SGAI=(SGA_t / Sales_t) / (SGA_t-1 /Sales_t-1)
=(0.175 / 0) / (0.115 / 0)
= /
=

7. LVGI = Leverage Index

The ratio of total debt to Total Assets in year t relative to yeat t-1.

An LVGI > 1 indicates an increase in leverage

LVGI=((LTD_t + CurrentLiabilities_t) / TotalAssets_t) / ((LTD_t-1 + CurrentLiabilities_t-1) / TotalAssets_t-1)
=((0 + 0.931) / 0.19) / ((0 + 0.521) / 0.146)
=4.9 / 3.568493
=

8. TATA = Total Accruals to Total Assets

Total accruals calculated as the change in working capital accounts other than cash less depreciation.

TATA=(IncomefromContinuingOperations_t - CashFlowsfromOperations_t) / TotalAssets_t
=(NetIncome_t - NonOperatingIncome_t - CashFlowsfromOperations_t) / TotalAssets_t
=(-0.366 - 0 - -0.242) / 0.19
=-0.652632

An M-Score of equal or less than -1.78 suggests that the company is unlikely to be a manipulator. An M-Score of greater than -1.78 signals that the company is likely to be a manipulator.

Frequently Asked Questions Learn more about Beneish M-Score →
What does a Beneish M-Score of 0.00 mean?
Vedanta Aluminium Metal (NSE:VAML) has a Beneish M-Score of 0.00 as of Jun. 29, 2026. The Beneish M-score measures the likelihood of earnings manipulation. View historical data on Vedanta Aluminium Metal and its competitors. According to the industry distribution chart, Vedanta Aluminium Metal ranks #999999 out of 684 companies in the Metals & Mining industry.
Is Vedanta Aluminium Metal's Beneish M-Score too high?
Vedanta Aluminium Metal's current Beneish M-Score is 0.00. Based on the distribution chart, Vedanta Aluminium Metal ranks #999999 out of 684 companies in the Metals & Mining industry, which is in the bottom quartile relative to peers. Overall, Vedanta Aluminium Metal has a GF Score™ of 7/100, reflecting its overall financial health beyond just this single metric.
How does Vedanta Aluminium Metal's Beneish M-Score compare to AA?
According to the Metals & Mining industry distribution chart, Vedanta Aluminium Metal ranks #999999 out of 684 companies for Beneish M-Score. This places Vedanta Aluminium Metal in the lower half of its industry. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Beneish M-Score for a Metals & Mining company?
A good Beneish M-Score depends on the Metals & Mining industry context. However, Beneish M-Score should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Beneish M-Score mean?
A high Beneish M-Score can signal that a stock is expensive relative to its fundamentals. The Beneish M-score measures the likelihood of earnings manipulation. View historical data on Vedanta Aluminium Metal and its competitors. Vedanta Aluminium Metal's current Beneish M-Score is 0.00. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Vedanta Aluminium Metal stock overvalued right now?
Vedanta Aluminium Metal (NSE:VAML) has a current Beneish M-Score of 0.00. The current Beneish M-Score is 0.00. Vedanta Aluminium Metal's overall GF Score™ is 7/100. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Beneish M-Score calculated?
Beneish M-Score is calculated from a company's financial statements. For Vedanta Aluminium Metal (NSE:VAML), the current Beneish M-Score is 0.00 as of Jun. 29, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.

Vedanta Aluminium Metal Business Description

Other Exchanges 544780:India
Address 7 Lodhi Road, Core-6, 3rd Floor, SCOPE Complex, New Delhi, IND, 110003
Vedanta Aluminium Metal Ltd is engaged in the metal and mining sector. Its aluminum products are Restora Low Carbon Aluminium, BilletsPrimary Foundry Alloy, Wire RodsFlip Coils, P1O2O Ingots, Slabs, Rolled Product, and Aluminium Park.
7GF Score

Get the complete analysis for NSE:VAML

Beneish M-Score is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.

₹442.82
Price