Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
The historical rank and industry rank for Emkay Taps and Cutting Tools's Net Margin % or its related term are showing as below:
NSE:EMKAYTOOLS'
s Net Margin % Range Over the Past 10 Years
Min: 8.29 Med: 39.9 Max: 1252.44
Current: 1252.44
NSE:EMKAYTOOLS's Net Margin % is ranked better than 99.8% of 3050
companies
in the Industrial Products industry
Industry Median: 4.73
vs NSE:EMKAYTOOLS: 1252.44
Emkay Taps and Cutting Tools (NSE:EMKAYTOOLS) Net Margin % Explanation
Although Net Income and Earnings-per-Share (EPS) are the most widely used parameter in measuring a company's profitability and valuation, it is the least reliable. The reason is that reported earnings can be manipulated easily by adjusting any numbers such as Depreciation, Depletion and Amotorization and non-recurring items.
But the long term trend of the net margin is a good indicator of the competitiveness and health of the business.
Emkay Taps and Cutting Tools Net Margin % Related Terms
Emkay Taps and Cutting Tools Net Margin % Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
NSE:EMKAYTOOLS vs SNA, RBC, LECO: Net Margin % Comparison
For the Tools & Accessories subindustry, Emkay Taps and Cutting Tools's Net Margin %, along with its competitors' market caps and Net Margin % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Emkay Taps and Cutting Tools Net Margin % vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Emkay Taps and Cutting Tools's Net Margin % distribution charts can be found below:
* The bar in red indicates where Emkay Taps and Cutting Tools's Net Margin % falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Emkay Taps and Cutting Tools (NSE:EMKAYTOOLS) has a Net Margin % of 1,252.44% as of Mar. 2026. Net margin is the ratio of total net income to net sales. View historical data on Emkay Taps and Cutting Tools and its competitors. This is 3039% above median its historical median of 39.90. Over the past decade, Emkay Taps and Cutting Tools' Net Margin % has ranged from 8.29 to 1,252.44. According to the industry distribution chart, Emkay Taps and Cutting Tools ranks #6 out of 3050 companies in the Industrial Products industry, placing it in the top 0.2%.
Is Emkay Taps and Cutting Tools' Net Margin % too high?
Emkay Taps and Cutting Tools' current Net Margin % of 1,252.44% is 3039% above median its 10-year median of 39.90. Over the past 10 years, this metric has ranged from a low of 8.29 to a high of 1,252.44. The Industrial Products industry median Net Margin % is 4.73. Emkay Taps and Cutting Tools' value of 1,252.44% is 26378.6% above this industry median. Based on the distribution chart, Emkay Taps and Cutting Tools ranks #6 out of 3050 companies in the Industrial Products industry, which is in the top quartile — a strong position relative to peers. Overall, Emkay Taps and Cutting Tools has a GF Score™ of 65/100 and is considered Possible Value Trap, reflecting its overall financial health beyond just this single metric.
How does Emkay Taps and Cutting Tools' Net Margin % compare to SNA and RBC?
According to the Industrial Products industry distribution chart, Emkay Taps and Cutting Tools ranks #6 out of 3050 companies for Net Margin %. This places Emkay Taps and Cutting Tools in the top 0% of its industry — outperforming the majority of peers. The industry median Net Margin % is 4.73. Emkay Taps and Cutting Tools' value of 1,252.44% is 26378.6% above this benchmark. Historically, Emkay Taps and Cutting Tools' own Net Margin % has ranged from 8.29 to 1,252.44 over the past decade. While the company's 10-year median is 39.90 vs. the industry median of 4.73, Emkay Taps and Cutting Tools has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Net Margin % for an Industrial Products company?
The median Net Margin % among Industrial Products companies is 4.73, based on 3,050 companies in the industry. Companies in the top quartile (top 25%) have a Net Margin % significantly above this median, while those in the bottom quartile fall well below. However, Net Margin % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Emkay Taps and Cutting Tools's current Net Margin % of 1,252.44% is 26378.6% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Net Margin % mean?
A high Net Margin % can signal that a stock is expensive relative to its fundamentals. Net margin is the ratio of total net income to net sales. View historical data on Emkay Taps and Cutting Tools and its competitors. For the Industrial Products industry, the median Net Margin % is 4.73 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Emkay Taps and Cutting Tools's current Net Margin % is 1,252.44%, which is 3039% above median its own 10-year median of 39.90. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Emkay Taps and Cutting Tools stock overvalued right now?
Based on GuruFocus' analysis, Emkay Taps and Cutting Tools (NSE:EMKAYTOOLS) is currently considered Possible Value Trap. The stock's GF Value™ is ₹153.45, compared to a current price of ₹90.30 — trading 41.2% below its estimated fair value. The current Net Margin % is 1,252.44%, which is 3039% above median its 10-year median of 39.90 and 26378.6% above the Industrial Products industry median of 4.73. Emkay Taps and Cutting Tools' overall GF Score™ is 65/100 with 2 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Net Margin % calculated?
Net Margin % is calculated from a company's financial statements. For Emkay Taps and Cutting Tools (NSE:EMKAYTOOLS), the current Net Margin % is 1,252.44% as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Emkay Taps and Cutting Tools (NSE:EMKAYTOOLS) Overvalued in 2026?
Based on GuruFocus' analysis, Emkay Taps and Cutting Tools stock appears to be undervalued.
The current stock price of ₹90.30 is trading 41.2% below its estimated GF Value™ of ₹153.45.
GuruFocus considers Emkay Taps and Cutting Tools to be Possible Value Trap.
Key valuation signals for NSE:EMKAYTOOLS:
Net Margin %: 1,252.44% (3039% above median its 10-year median of 39.90)
GF Value™: ₹153.45 vs. price of ₹90.30 (41.2% below fair value)
Industry Position: 26378.6% above the Industrial Products median (#6 of 3050)
No single metric tells the full story. See the NSE:EMKAYTOOLS stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Emkay Taps and Cutting Tools Ltd is engaged in manufacturing and selling taps and cutting tools. The company operates two main segments: the manufacturing of taps and cutting tools, and the production of power through windmills. The majority of its revenue is generated from the tools segment. It runs two wind farm projects located in Shivapura Kavalu Village, Belur Taluka, Hassan District, Karnataka, and Kita & Ugawa, Jaisalmer District, Rajasthan.
65GF Score
Get the complete analysis for NSE:EMKAYTOOLS
Net Margin % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
NSE:EMKAYTOOLS has been successfully added to your 
