Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
OCF Yield % is calculated as Cash Flow from Operations divided by Market Capitalization. It is a financial solvency ratio that compares the operating cash flow a company is expected to earn against its market value.
The historical rank and industry rank for Emkay Taps and Cutting Tools's OCF Yield % or its related term are showing as below:
NSE:EMKAYTOOLS'
s OCF Yield % Range Over the Past 10 Years
Min: -5.13 Med: 10.73 Max: 141.83
Current: 20.01
During the past 12 years, the highest OCF Yield % of Emkay Taps and Cutting Tools was 141.83%. The lowest was -5.13%. And the median was 10.73%.
NSE:EMKAYTOOLS's OCF Yield % is ranked better than 92.61% of 3084
companies
in the Industrial Products industry
Industry Median: 2.85
vs NSE:EMKAYTOOLS: 20.01
Emkay Taps and Cutting Tools OCF Yield % Explanation
Similar to Earnings Yield %, OCF Yield % is financial solvency ratio. A lower ratio suggests a less attractive investment, indicating that investors might not receive substantial returns in proportion to their investment. Conversely, a high operating cash flow yield signals that a company generates sufficient cash to comfortably meet its debts, obligations, and dividend payments, making it a promising investment choice.
Emkay Taps and Cutting Tools OCF Yield % Related Terms
Emkay Taps and Cutting Tools OCF Yield % Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
NSE:EMKAYTOOLS vs SNA, RBC, LECO: OCF Yield % Comparison
For the Tools & Accessories subindustry, Emkay Taps and Cutting Tools's OCF Yield %, along with its competitors' market caps and OCF Yield % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Emkay Taps and Cutting Tools OCF Yield % vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Emkay Taps and Cutting Tools's OCF Yield % distribution charts can be found below:
* The bar in red indicates where Emkay Taps and Cutting Tools's OCF Yield % falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Emkay Taps and Cutting Tools (NSE:EMKAYTOOLS) has a OCF Yield % of 20.01 as of Sep. 02, 2026. OCF Yield is calculated as Cash Flow from Operations divided by Market Capitalization. View historical data on Emkay Taps and Cutting Tools and its competitors. This is 86% above median its historical median of 10.73. According to the industry distribution chart, Emkay Taps and Cutting Tools ranks #228 out of 3084 companies in the Industrial Products industry, placing it in the top 7.4%.
Is Emkay Taps and Cutting Tools' OCF Yield % too high?
Emkay Taps and Cutting Tools' current OCF Yield % of 20.01 is 86% above median its 10-year median of 10.73. The Industrial Products industry median OCF Yield % is 2.85. Emkay Taps and Cutting Tools' value of 20.01 is 602.1% above this industry median. Based on the distribution chart, Emkay Taps and Cutting Tools ranks #228 out of 3084 companies in the Industrial Products industry, which is in the top quartile — a strong position relative to peers. Overall, Emkay Taps and Cutting Tools has a GF Score™ of 61/100 and is considered Possible Value Trap, reflecting its overall financial health beyond just this single metric.
How does Emkay Taps and Cutting Tools' OCF Yield % compare to SNA and RBC?
According to the Industrial Products industry distribution chart, Emkay Taps and Cutting Tools ranks #228 out of 3084 companies for OCF Yield %. This places Emkay Taps and Cutting Tools in the top 7% of its industry — outperforming the majority of peers. The industry median OCF Yield % is 2.85. Emkay Taps and Cutting Tools' value of 20.01 is 602.1% above this benchmark. While the company's 10-year median is 10.73 vs. the industry median of 2.85, Emkay Taps and Cutting Tools has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good OCF Yield % for an Industrial Products company?
The median OCF Yield % among Industrial Products companies is 2.85, based on 3,084 companies in the industry. Companies in the top quartile (top 25%) have a OCF Yield % significantly above this median, while those in the bottom quartile fall well below. However, OCF Yield % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Emkay Taps and Cutting Tools's current OCF Yield % of 20.01 is 602.1% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high OCF Yield % mean?
A high OCF Yield % can signal that a stock is expensive relative to its fundamentals. OCF Yield is calculated as Cash Flow from Operations divided by Market Capitalization. View historical data on Emkay Taps and Cutting Tools and its competitors. For the Industrial Products industry, the median OCF Yield % is 2.85 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Emkay Taps and Cutting Tools's current OCF Yield % is 20.01, which is 86% above median its own 10-year median of 10.73. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Emkay Taps and Cutting Tools stock overvalued right now?
Based on GuruFocus' analysis, Emkay Taps and Cutting Tools (NSE:EMKAYTOOLS) is currently considered Possible Value Trap. The stock's GF Value™ is ₹153.45, compared to a current price of ₹90.30 — trading 41.2% below its estimated fair value. The current OCF Yield % is 20.01, which is 86% above median its 10-year median of 10.73 and 602.1% above the Industrial Products industry median of 2.85. Emkay Taps and Cutting Tools' overall GF Score™ is 61/100 with 2 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is OCF Yield % calculated?
OCF Yield % is calculated from a company's financial statements. For Emkay Taps and Cutting Tools (NSE:EMKAYTOOLS), the current OCF Yield % is 20.01 as of Sep. 02, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Emkay Taps and Cutting Tools (NSE:EMKAYTOOLS) Overvalued in 2026?
Based on GuruFocus' analysis, Emkay Taps and Cutting Tools stock appears to be undervalued.
The current stock price of ₹90.30 is trading 41.2% below its estimated GF Value™ of ₹153.45.
GuruFocus considers Emkay Taps and Cutting Tools to be Possible Value Trap.
Key valuation signals for NSE:EMKAYTOOLS:
OCF Yield %: 20.01 (86% above median its 10-year median of 10.73)
GF Value™: ₹153.45 vs. price of ₹90.30 (41.2% below fair value)
Industry Position: 602.1% above the Industrial Products median (#228 of 3084)
No single metric tells the full story. See the NSE:EMKAYTOOLS stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Emkay Taps and Cutting Tools Ltd is engaged in manufacturing and selling taps and cutting tools. The company operates two main segments: the manufacturing of taps and cutting tools, and the production of power through windmills. The majority of its revenue is generated from the tools segment. It runs two wind farm projects located in Shivapura Kavalu Village, Belur Taluka, Hassan District, Karnataka, and Kita & Ugawa, Jaisalmer District, Rajasthan.
61GF Score
Get the complete analysis for NSE:EMKAYTOOLS
OCF Yield % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
NSE:EMKAYTOOLS has been successfully added to your 
