Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Datron AGFRA:DAR -1.26%84 OCF Yield % is 15.24 as of Jul. 30, 2026, which is 101% above its 10-year median of 7.58. GuruFocus rates FRA:DAR with a GF Score™ of 84/100 and a GF Value™ of €14.30 (Significantly Undervalued). The stock has 6 warning signs investors should review. Among 3,072 Industrial Products companies, Datron AG ranks better than 88.02% on this metric.
OCF Yield % is calculated as Cash Flow from Operations divided by Market Capitalization. It is a financial solvency ratio that compares the operating cash flow a company is expected to earn against its market value.
Similar to Earnings Yield %, OCF Yield % is financial solvency ratio. A lower ratio suggests a less attractive investment, indicating that investors might not receive substantial returns in proportion to their investment. Conversely, a high operating cash flow yield signals that a company generates sufficient cash to comfortably meet its debts, obligations, and dividend payments, making it a promising investment choice.
Datron AG OCF Yield % Related Terms
Datron AG OCF Yield % Historical Data
* Premium members only.
The historical data trend for Datron AG's OCF Yield % can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Specialty Industrial Machinery subindustry, Datron AG's OCF Yield %, along with its competitors' market caps and OCF Yield % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Datron AG OCF Yield % vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Datron AG's OCF Yield % distribution charts can be found below:
* The bar in red indicates where Datron AG's OCF Yield % falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Datron AG (FRA:DAR) has a OCF Yield % of 15.24 as of Jul. 30, 2026. OCF Yield is calculated as Cash Flow from Operations divided by Market Capitalization. View historical data on Datron AG and its competitors. This is 101% above median its historical median of 7.58. Over the past decade, Datron AG's OCF Yield % has ranged from 1.29 to 29.68. According to the industry distribution chart, Datron AG ranks #368 out of 3072 companies in the Industrial Products industry, placing it in the top 12%.
Is Datron AG's OCF Yield % too high?
Datron AG's current OCF Yield % of 15.24 is 101% above median its 10-year median of 7.58. Over the past 10 years, this metric has ranged from a low of 1.29 to a high of 29.68. The Industrial Products industry median OCF Yield % is 3.28. Datron AG's value of 15.24 is 364.6% above this industry median. Based on the distribution chart, Datron AG ranks #368 out of 3072 companies in the Industrial Products industry, which is in the top quartile — a strong position relative to peers. Overall, Datron AG has a GF Score™ of 84/100 and is considered Significantly Undervalued, reflecting its overall financial health beyond just this single metric.
How does Datron AG's OCF Yield % compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Datron AG ranks #368 out of 3072 companies for OCF Yield %. This places Datron AG in the top 12% of its industry — outperforming the majority of peers. The industry median OCF Yield % is 3.28. Datron AG's value of 15.24 is 364.6% above this benchmark. Historically, Datron AG's own OCF Yield % has ranged from 1.29 to 29.68 over the past decade. While the company's 10-year median is 7.58 vs. the industry median of 3.28, Datron AG has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good OCF Yield % for an Industrial Products company?
The median OCF Yield % among Industrial Products companies is 3.28, based on 3,072 companies in the industry. Companies in the top quartile (top 25%) have a OCF Yield % significantly above this median, while those in the bottom quartile fall well below. However, OCF Yield % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Datron AG's current OCF Yield % of 15.24 is 364.6% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high OCF Yield % mean?
A high OCF Yield % can signal that a stock is expensive relative to its fundamentals. OCF Yield is calculated as Cash Flow from Operations divided by Market Capitalization. View historical data on Datron AG and its competitors. For the Industrial Products industry, the median OCF Yield % is 3.28 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Datron AG's current OCF Yield % is 15.24, which is 101% above median its own 10-year median of 7.58. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Datron AG stock overvalued right now?
Based on GuruFocus' analysis, Datron AG (FRA:DAR) is currently considered Significantly Undervalued. The stock's GF Value™ is €14.30, compared to a current price of €7.85 — trading 45.1% below its estimated fair value. The current OCF Yield % is 15.24, which is 101% above median its 10-year median of 7.58 and 364.6% above the Industrial Products industry median of 3.28. Datron AG's overall GF Score™ is 84/100 with 6 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is OCF Yield % calculated?
OCF Yield % is calculated from a company's financial statements. For Datron AG (FRA:DAR), the current OCF Yield % is 15.24 as of Jul. 30, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Datron AG (FRA:DAR) Overvalued in 2026?
Based on GuruFocus' analysis, Datron AG stock appears to be undervalued.
The current stock price of €7.85 is trading 45.1% below its estimated GF Value™ of €14.30.
GuruFocus considers Datron AG to be Significantly Undervalued.
Key valuation signals for FRA:DAR:
OCF Yield %: 15.24 (101% above median its 10-year median of 7.58)
GF Value™: €14.30 vs. price of €7.85 (45.1% below fair value)
Industry Position: 364.6% above the Industrial Products median (#368 of 3072)
No single metric tells the full story. See the FRA:DAR stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Datron AG group specializes in the development, production, and sale of high-speed CNC milling machines, dental milling machines, high-performance dosing machines, milling tools as well as device-specific software and after-sales services specialized. DATRON high-speed CNC milling machines are particularly suitable for processing future-oriented materials such as aluminum and composite materials. The dental milling machines ensure efficient processing of all common denture materials in dental laboratories. The high-performance metering machines are ideal for industrial sealing and adhesive applications.
84GF Score
Get the complete analysis for FRA:DAR
OCF Yield % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
FRA:DAR has been successfully added to your 
