Datron AGFRA:DAR +0.68%44 ROE % is 1.71% as of Jun. 2025, which is 87% below its 10-year median of 13.65. GuruFocus rates FRA:DAR with a GF Score™ of 44/100 and a GF Value™ of €0.51 (Significantly Overvalued). The stock has 9 warning signs investors should review. Among 3,009 Industrial Products companies, Datron AG ranks better than 75.94% on this metric.
ROE % is calculated as Net Income divided by its average Total Stockholders Equity over a certain period of time. Datron AG's annualized net income for the quarter that ended in Jun. 2025 was €0.75 Mil. Datron AG's average Total Stockholders Equity over the quarter that ended in Jun. 2025 was €43.73 Mil. Therefore, Datron AG's annualized ROE % for the quarter that ended in Jun. 2025 was 1.71%.
The historical rank and industry rank for Datron AG's ROE % or its related term are showing as below:
FRA:DAR'
s ROE % Range Over the Past 10 Years
Min: 4.72 Med: 13.65 Max: 21.16
Current: 12.28
During the past 13 years, Datron AG's highest ROE % was 21.16%. The lowest was 4.72%. And the median was 13.65%.
FRA:DAR's ROE % is ranked better than 75.94% of 3009
companies
in the Industrial Products industry
Industry Median: 5.91
vs FRA:DAR: 12.28
Datron AG (FRA:DAR) ROE % Explanation
ROE % measures the rate of return on the ownership interest (shareholder's equity) of the common stock owners. It measures a firm's efficiency at generating profits from every unit of shareholders' equity (also known as net assets or assets minus liabilities). ROE % shows how well a company uses investment funds to generate earnings growth. ROE %s between 15% and 20% are considered desirable.
The factors that affect a company's ROE % can be illustrated with the three-step DuPont Analysis:
Note:
The net income data used here is two times the semi-annual (Jun. 2025) net income data. The Revenue data used here is two times the semi-annual (Jun. 2025) revenue data. The same rule applies to Pre-Tax Income and Operating Income.
* In the five-step DuPont Analysis, Operating Income is only available for non-financial companies. Thus, for Insurance companies, we use EBIT as a substitution of Operating Income. For Banks, both Operating Income and EBIT is unavailable. Thus we combined Interest Burden and Operating Margin % into Pretax Margin %, and the DuPont Analysis is divided into four components instead.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Be Aware
Net Income is used.
Because a company can increase its ROE % by having more financial leverage, it is important to watch the equity multiplier when investing in high ROE % companies. Like ROA %, ROE % is calculated with only 12 months data. Fluctuations in company's earnings or business cycles can affect the ratio drastically. It is important to look at the ratio from a long term perspective.
Asset light businesses require very few assets to generate very high earnings. Their ROE %s can be extremely high.
Datron AG ROE % Related Terms
Datron AG ROE % Historical Data
* Premium members only.
The historical data trend for Datron AG's ROE % can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Specialty Industrial Machinery subindustry, Datron AG's ROE %, along with its competitors' market caps and ROE % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Datron AG ROE % vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Datron AG's ROE % distribution charts can be found below:
* The bar in red indicates where Datron AG's ROE % falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
In the calculation of annual ROE %, the net income of the last fiscal year and the average total shareholder equity over the fiscal year are used. In calculating the quarterly data,
the net income data used here is two times the semi-annual (Jun. 2025) net income data.
ROE % is displayed in the 30-year financial page.
Datron AG (FRA:DAR) has a ROE % of 1.71% as of Jun. 2025. Return on equity is the ratio of current-period net income to average two-period total equity. View historical data on Datron AG and its competitors. This is 87% below median its historical median of 13.65. Over the past decade, Datron AG's ROE % has ranged from 4.72 to 21.16. According to the industry distribution chart, Datron AG ranks #724 out of 3009 companies in the Industrial Products industry, placing it in the top 24.1%.
Is Datron AG's ROE % too high?
Datron AG's current ROE % of 1.71% is 87% below median its 10-year median of 13.65. Over the past 10 years, this metric has ranged from a low of 4.72 to a high of 21.16. The Industrial Products industry median ROE % is 5.91. Datron AG's value of 1.71% is 71.1% below this industry median. Based on the distribution chart, Datron AG ranks #724 out of 3009 companies in the Industrial Products industry, which is in the top quartile — a strong position relative to peers. Overall, Datron AG has a GF Score™ of 44/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Datron AG's ROE % compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Datron AG ranks #724 out of 3009 companies for ROE %. This places Datron AG in the top 24% of its industry — outperforming the majority of peers. The industry median ROE % is 5.91. Datron AG's value of 1.71% is 71.1% below this benchmark. Historically, Datron AG's own ROE % has ranged from 4.72 to 21.16 over the past decade. While the company's 10-year median is 13.65 vs. the industry median of 5.91, Datron AG has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good ROE % for an Industrial Products company?
The median ROE % among Industrial Products companies is 5.91, based on 3,009 companies in the industry. Companies in the top quartile (top 25%) have a ROE % significantly above this median, while those in the bottom quartile fall well below. However, ROE % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Datron AG's current ROE % of 1.71% is 71.1% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high ROE % mean?
A high ROE % can signal that a stock is expensive relative to its fundamentals. Return on equity is the ratio of current-period net income to average two-period total equity. View historical data on Datron AG and its competitors. For the Industrial Products industry, the median ROE % is 5.91 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Datron AG's current ROE % is 1.71%, which is 87% below median its own 10-year median of 13.65. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Datron AG stock overvalued right now?
Based on GuruFocus' analysis, Datron AG (FRA:DAR) is currently considered Significantly Overvalued. The stock's GF Value™ is €0.51, compared to a current price of €7.45 — trading 1360.8% above its estimated fair value. The current ROE % is 1.71%, which is 87% below median its 10-year median of 13.65 and 71.1% below the Industrial Products industry median of 5.91. Datron AG's overall GF Score™ is 44/100 with 9 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is ROE % calculated?
ROE % is calculated from a company's financial statements. For Datron AG (FRA:DAR), the current ROE % is 1.71% as of Jun. 2025. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Datron AG (FRA:DAR) Overvalued in 2026?
Based on GuruFocus' analysis, Datron AG stock appears to be overvalued.
The current stock price of €7.45 is trading 1360.8% above its estimated GF Value™ of €0.51.
GuruFocus considers Datron AG to be Significantly Overvalued.
Key valuation signals for FRA:DAR:
ROE %: 1.71% (87% below median its 10-year median of 13.65)
GF Value™: €0.51 vs. price of €7.45 (1360.8% above fair value)
Industry Position: 71.1% below the Industrial Products median (#724 of 3009)
No single metric tells the full story. See the FRA:DAR stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Datron AG group specializes in the development, production, and sale of high-speed CNC milling machines, dental milling machines, high-performance dosing machines, milling tools as well as device-specific software and after-sales services specialized. DATRON high-speed CNC milling machines are particularly suitable for processing future-oriented materials such as aluminum and composite materials. The dental milling machines ensure efficient processing of all common denture materials in dental laboratories. The high-performance metering machines are ideal for industrial sealing and adhesive applications.
44GF Score
Get the complete analysis for FRA:DAR
ROE % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
FRA:DAR has been successfully added to your 
