Hon Hai Precision Industry Co (CHIX:HHPDl) Operating Margin % Explanation
Just like Gross Margin %, it is important to see a company maintains its operating margin over time. Among the same industry, a company with higher operating margin is more efficient in its operation. It is also more stable during industry slowdown or recessions. Peter Lynch prefers those with higher margins than those with lower margins.
Be Aware
Operating Margin % can be manipulated by adjusting the rate of depreciation, depletion and amortization (DDA).
If a company is facing competition, its Operating Margin % may decline. Often the Operating Margin % declines well before the company's Revenue or even profit decline. Therefore, Operating Margin % is a very important indicator of whether the company is facing problems.
For instance, by 2012, Nokia (NOK)'s problems were well known and its stock had lost more than 90% of its market value since 2007. But Nokias Operating Margin % had already been in decline since 2002, although its Earnings per Share (Diluted) were still rising. Investors who paid attention to Operating Margin % would have avoided this huge loss. The same can be said for Research-in-Motion (RIMM).
Therefore, Operating Margin % is a very important screening filter for GuruFocus. GuruFocus's Buffett-Munger screener requires that the profit margin is either consistent or expanding. The Model Portfolio of the Buffett-Munger screener has outperformed the market every year since inception in 2009.
Hon Hai Precision Industry Co Operating Margin % Related Terms
Hon Hai Precision Industry Co Operating Margin % Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Hon Hai Precision Industry Co Operating Margin % Chart
CHIX:HHPDL vs APH, GLW, TEL: Operating Margin % Comparison
For the Electronic Components subindustry, Hon Hai Precision Industry Co's Operating Margin %, along with its competitors' market caps and Operating Margin % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Hon Hai Precision Industry Co Operating Margin % vs Hardware Industry
For the Hardware industry and Technology sector, Hon Hai Precision Industry Co's Operating Margin % distribution charts can be found below:
* The bar in red indicates where Hon Hai Precision Industry Co's Operating Margin % falls into.
Hon Hai Precision Industry Co Operating Margin % Calculation
Operating Margin % - also known as operating income margin, operating profit margin and return on sales (ROS) - is the ratio of Operating Income divided by net sales or Revenue, usually presented in percent.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Hon Hai Precision Industry Co (CHIX:HHPDL) has a Operating Margin % of 3.28% as of Dec. 2025. Operating margin is the ratio of total operating income to net sales. View historical data on Hon Hai Precision Industry Co and its competitors. This is 26% above median its historical median of 2.60. Over the past decade, Hon Hai Precision Industry Co's Operating Margin % has ranged from 2.07 to 4.01. According to the industry distribution chart, Hon Hai Precision Industry Co ranks #1314 out of 2472 companies in the Hardware industry, placing it in the top 53.2%.
Is Hon Hai Precision Industry Co's Operating Margin % too high?
Hon Hai Precision Industry Co's current Operating Margin % of 3.28% is 26% above median its 10-year median of 2.60. Over the past 10 years, this metric has ranged from a low of 2.07 to a high of 4.01. The Hardware industry median Operating Margin % is 3.80. Hon Hai Precision Industry Co's value of 3.28% is 13.7% below this industry median. Based on the distribution chart, Hon Hai Precision Industry Co ranks #1314 out of 2472 companies in the Hardware industry, which is below the industry midpoint. Overall, Hon Hai Precision Industry Co has a GF Score™ of 90/100 and is considered Modestly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Hon Hai Precision Industry Co's Operating Margin % compare to APH and GLW?
According to the Hardware industry distribution chart, Hon Hai Precision Industry Co ranks #1314 out of 2472 companies for Operating Margin %. This places Hon Hai Precision Industry Co in the lower half of its industry. The industry median Operating Margin % is 3.80. Hon Hai Precision Industry Co's value of 3.28% is 13.7% below this benchmark. Historically, Hon Hai Precision Industry Co's own Operating Margin % has ranged from 2.07 to 4.01 over the past decade. While the company's 10-year median is 2.60 vs. the industry median of 3.80, Hon Hai Precision Industry Co has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Operating Margin % for a Hardware company?
The median Operating Margin % among Hardware companies is 3.80, based on 2,472 companies in the industry. Companies in the top quartile (top 25%) have a Operating Margin % significantly above this median, while those in the bottom quartile fall well below. However, Operating Margin % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Hon Hai Precision Industry Co's current Operating Margin % of 3.28% is 13.7% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Operating Margin % mean?
A high Operating Margin % can signal that a stock is expensive relative to its fundamentals. Operating margin is the ratio of total operating income to net sales. View historical data on Hon Hai Precision Industry Co and its competitors. For the Hardware industry, the median Operating Margin % is 3.80 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Hon Hai Precision Industry Co's current Operating Margin % is 3.28%, which is 26% above median its own 10-year median of 2.60. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Hon Hai Precision Industry Co stock overvalued right now?
Based on GuruFocus' analysis, Hon Hai Precision Industry Co (CHIX:HHPDL) is currently considered Modestly Overvalued. The stock's GF Value™ is $14.05, compared to a current price of $16.14 — trading 14.9% above its estimated fair value. The current Operating Margin % is 3.28%, which is 26% above median its 10-year median of 2.60 and 13.7% below the Hardware industry median of 3.80. Hon Hai Precision Industry Co's overall GF Score™ is 90/100 with 6 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Operating Margin % calculated?
Operating Margin % is calculated from a company's financial statements. For Hon Hai Precision Industry Co (CHIX:HHPDL), the current Operating Margin % is 3.28% as of Dec. 2025. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Hon Hai Precision Industry Co (CHIX:HHPDL) Overvalued in 2026?
Based on GuruFocus' analysis, Hon Hai Precision Industry Co stock appears to be overvalued.
The current stock price of $16.14 is trading 14.9% above its estimated GF Value™ of $14.05.
GuruFocus considers Hon Hai Precision Industry Co to be Modestly Overvalued.
Key valuation signals for CHIX:HHPDL:
Operating Margin %: 3.28% (26% above median its 10-year median of 2.60)
GF Value™: $14.05 vs. price of $16.14 (14.9% above fair value)
Industry Position: 13.7% below the Hardware median (#1314 of 2472)
No single metric tells the full story. See the CHIX:HHPDL stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Hon Hai Precision Industry Co Business Description
Hon Hai Precision is the world's largest contract manufacturer of consumer electronics, communications, and computer products. It is the biggest supplier to Apple, whose business accounted for around 50% of overall revenue in 2025. Hon Hai is also involved in the production of upstream components such as electronic connectors, semiconductor packaging, and metal casings for smartphones, as well as producing servers. These upstream activities are mainly conducted through its listed majority-owned subsidiaries Foxconn Industrial Internet and FIH Mobile. In response to its traditional end markets of computers, smartphones, and telecom equipment maturing in 2019 it started on a strategy to develop expertise in three new growth areas—electric vehicles, digital health, and robotics.
90GF Score
Get the complete analysis for CHIX:HHPDL
Operating Margin % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
CHIX:HHPDL has been successfully added to your 
