Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Minmetals Development CoSHSE:600058 -2.93%55 Operating Margin % is 1.21% as of Mar. 2026, which is 5% below its 10-year median of 1.27. GuruFocus rates SHSE:600058 with a GF Score™ of 55/100 and a GF Value™ of ¥5.45 (Significantly Overvalued). The stock has 2 warning signs investors should review. Among 611 Steel companies, Minmetals Development Co ranks worse than 66.12% on this metric.
Minmetals Development Co (SHSE:600058) Operating Margin % Explanation
Just like Gross Margin %, it is important to see a company maintains its operating margin over time. Among the same industry, a company with higher operating margin is more efficient in its operation. It is also more stable during industry slowdown or recessions. Peter Lynch prefers those with higher margins than those with lower margins.
Be Aware
Operating Margin % can be manipulated by adjusting the rate of depreciation, depletion and amortization (DDA).
If a company is facing competition, its Operating Margin % may decline. Often the Operating Margin % declines well before the company's Revenue or even profit decline. Therefore, Operating Margin % is a very important indicator of whether the company is facing problems.
For instance, by 2012, Nokia (NOK)'s problems were well known and its stock had lost more than 90% of its market value since 2007. But Nokias Operating Margin % had already been in decline since 2002, although its Earnings per Share (Diluted) were still rising. Investors who paid attention to Operating Margin % would have avoided this huge loss. The same can be said for Research-in-Motion (RIMM).
Therefore, Operating Margin % is a very important screening filter for GuruFocus. GuruFocus's Buffett-Munger screener requires that the profit margin is either consistent or expanding. The Model Portfolio of the Buffett-Munger screener has outperformed the market every year since inception in 2009.
Minmetals Development Co Operating Margin % Related Terms
Minmetals Development Co Operating Margin % Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
SHSE:600058 vs NUE, STLD, RS: Operating Margin % Comparison
For the Steel subindustry, Minmetals Development Co's Operating Margin %, along with its competitors' market caps and Operating Margin % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Minmetals Development Co Operating Margin % vs Steel Industry
For the Steel industry and Basic Materials sector, Minmetals Development Co's Operating Margin % distribution charts can be found below:
* The bar in red indicates where Minmetals Development Co's Operating Margin % falls into.
Minmetals Development Co Operating Margin % Calculation
Operating Margin % - also known as operating income margin, operating profit margin and return on sales (ROS) - is the ratio of Operating Income divided by net sales or Revenue, usually presented in percent.
Minmetals Development Co's Operating Margin % for the fiscal year that ended in Dec. 2025 is calculated as
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Minmetals Development Co (SHSE:600058) has a Operating Margin % of 1.21% as of Mar. 2026. Operating margin is the ratio of total operating income to net sales. View historical data on Minmetals Development Co and its competitors. This is near median its historical median of 1.27. Over the past decade, Minmetals Development Co's Operating Margin % has ranged from 0.84 to 1.94. According to the industry distribution chart, Minmetals Development Co ranks #404 out of 611 companies in the Steel industry, placing it in the top 66.1%.
Is Minmetals Development Co's Operating Margin % too high?
Minmetals Development Co's current Operating Margin % of 1.21% is near median its 10-year median of 1.27. Over the past 10 years, this metric has ranged from a low of 0.84 to a high of 1.94. The Steel industry median Operating Margin % is 3.01. Minmetals Development Co's value of 1.21% is 59.8% below this industry median. Based on the distribution chart, Minmetals Development Co ranks #404 out of 611 companies in the Steel industry, which is below the industry midpoint. Overall, Minmetals Development Co has a GF Score™ of 55/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Minmetals Development Co's Operating Margin % compare to NUE and STLD?
According to the Steel industry distribution chart, Minmetals Development Co ranks #404 out of 611 companies for Operating Margin %. This places Minmetals Development Co in the lower half of its industry. The industry median Operating Margin % is 3.01. Minmetals Development Co's value of 1.21% is 59.8% below this benchmark. Historically, Minmetals Development Co's own Operating Margin % has ranged from 0.84 to 1.94 over the past decade. While the company's 10-year median is 1.27 vs. the industry median of 3.01, Minmetals Development Co has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Operating Margin % for a Steel company?
The median Operating Margin % among Steel companies is 3.01, based on 611 companies in the industry. Companies in the top quartile (top 25%) have a Operating Margin % significantly above this median, while those in the bottom quartile fall well below. However, Operating Margin % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Minmetals Development Co's current Operating Margin % of 1.21% is 59.8% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Operating Margin % mean?
A high Operating Margin % can signal that a stock is expensive relative to its fundamentals. Operating margin is the ratio of total operating income to net sales. View historical data on Minmetals Development Co and its competitors. For the Steel industry, the median Operating Margin % is 3.01 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Minmetals Development Co's current Operating Margin % is 1.21%, which is near median its own 10-year median of 1.27. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Minmetals Development Co stock overvalued right now?
Based on GuruFocus' analysis, Minmetals Development Co (SHSE:600058) is currently considered Significantly Overvalued. The stock's GF Value™ is ¥5.45, compared to a current price of ¥8.62 — trading 58.2% above its estimated fair value. The current Operating Margin % is 1.21%, which is near median its 10-year median of 1.27 and 59.8% below the Steel industry median of 3.01. Minmetals Development Co's overall GF Score™ is 55/100 with 2 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Operating Margin % calculated?
Operating Margin % is calculated from a company's financial statements. For Minmetals Development Co (SHSE:600058), the current Operating Margin % is 1.21% as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Minmetals Development Co (SHSE:600058) Overvalued in 2026?
Based on GuruFocus' analysis, Minmetals Development Co stock appears to be overvalued.
The current stock price of ¥8.62 is trading 58.2% above its estimated GF Value™ of ¥5.45.
GuruFocus considers Minmetals Development Co to be Significantly Overvalued.
Key valuation signals for SHSE:600058:
Operating Margin %: 1.21% (near median its 10-year median of 1.27)
GF Value™: ¥5.45 vs. price of ¥8.62 (58.2% above fair value)
Industry Position: 59.8% below the Steel median (#404 of 611)
No single metric tells the full story. See the SHSE:600058 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Minmetals Development Co Ltd is a steel distribution service provider. The activities of the company include the supply of metallurgical raw materials which includes iron ore, coal, coke, and pig iron, steel trading, processing and distribution, and logistics services.
55GF Score
Get the complete analysis for SHSE:600058
Operating Margin % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
SHSE:600058 has been successfully added to your 
