The Dividend Payout Ratio is the measure of dividends paid out to shareholders relative to the company's net income. It is calculated as the Dividends per Share divided by the Earnings per Share (Diluted) during the same time period. PT Asiaplast Industries Tbk's Dividend Payout Ratio for the
months ended in Mar. 2026 was 0.00.
The historical rank and industry rank for PT Asiaplast Industries Tbk's Dividend Payout Ratio or its related term are showing as below:
During the past 7 years, the highest Dividend Payout Ratio of PT Asiaplast Industries Tbk was 0.39. The lowest was 0.39. And the median was 0.39.
ISX:APLI's Dividend Payout Ratio is not ranked *
in the Packaging & Containers industry.
Industry Median: 0.39 * Ranked among companies with meaningful Dividend Payout Ratio only.
During the past 7 years, the highest Trailing Annual Dividend Yield of PT Asiaplast Industries Tbk was 17.90%. The lowest was 0.92%. And the median was 0.98%.
During the past 12 months, PT Asiaplast Industries Tbk's average Dividends Per Share Growth Rate was -100.00% per year.
The growth rate is calculated with least square regression.
For more information regarding to dividend, please check our Dividend Page.
* Please note that "special dividend" is not included in the calculation of dividend per share and related fields.
PT Asiaplast Industries Tbk (ISX:APLI) Dividend Payout Ratio Explanation
In dividends investing, Dividend Payout Ratio and Dividend Growth Rate are the two most important variables for consideration. A lower payout ratio may indicate that the company has more room to increase its dividends.
PT Asiaplast Industries Tbk Dividend Payout Ratio Related Terms
PT Asiaplast Industries Tbk Dividend Payout Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
PT Asiaplast Industries Tbk Dividend Payout Ratio Chart
ISX:APLI vs SW, PKG, IP: Dividend Payout Ratio Comparison
For the Packaging & Containers subindustry, PT Asiaplast Industries Tbk's Dividend Payout Ratio, along with its competitors' market caps and Dividend Payout Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
PT Asiaplast Industries Tbk Dividend Payout Ratio vs Packaging & Containers Industry
For the Packaging & Containers industry and Consumer Cyclical sector, PT Asiaplast Industries Tbk's Dividend Payout Ratio distribution charts can be found below:
* The bar in red indicates where PT Asiaplast Industries Tbk's Dividend Payout Ratio falls into.
PT Asiaplast Industries Tbk Dividend Payout Ratio Calculation
The Dividend Payout Ratio is the measure of dividends paid out to shareholders relative to the company's net income. It is calculated as the Dividends per Share divided by the Earnings per Share (Diluted) during the same time period.
PT Asiaplast Industries Tbk's Dividend Payout Ratio for the fiscal year that ended in Dec. 2025 is calculated as
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
PT Asiaplast Industries Tbk (ISX:APLI) has a Dividend Payout Ratio of 0.00 as of Mar. 2026. Dividend payout ratio is the percent of company earnings paid out as dividends. View historical data on PT Asiaplast Industries Tbk and its competitors. Over the past decade, PT Asiaplast Industries Tbk's Dividend Payout Ratio has ranged from 0.39 to 0.39. According to the industry distribution chart, PT Asiaplast Industries Tbk ranks #999999 out of 211 companies in the Packaging & Containers industry.
Is PT Asiaplast Industries Tbk's Dividend Payout Ratio too high?
PT Asiaplast Industries Tbk's current Dividend Payout Ratio is 0.00. Over the past 10 years, this metric has ranged from a low of 0.39 to a high of 0.39. Based on the distribution chart, PT Asiaplast Industries Tbk ranks #999999 out of 211 companies in the Packaging & Containers industry, which is in the bottom quartile relative to peers. Overall, PT Asiaplast Industries Tbk has a GF Score™ of 53/100 and is considered Significantly Undervalued, reflecting its overall financial health beyond just this single metric.
How does PT Asiaplast Industries Tbk's Dividend Payout Ratio compare to SW and PKG?
According to the Packaging & Containers industry distribution chart, PT Asiaplast Industries Tbk ranks #999999 out of 211 companies for Dividend Payout Ratio. This places PT Asiaplast Industries Tbk in the lower half of its industry. The industry median Dividend Payout Ratio is 0.39. Historically, PT Asiaplast Industries Tbk's own Dividend Payout Ratio has ranged from 0.39 to 0.39 over the past decade. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Dividend Payout Ratio for a Packaging & Containers company?
The median Dividend Payout Ratio among Packaging & Containers companies is 0.39, based on 211 companies in the industry. Companies in the top quartile (top 25%) have a Dividend Payout Ratio significantly above this median, while those in the bottom quartile fall well below. However, Dividend Payout Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Dividend Payout Ratio mean?
A high Dividend Payout Ratio can signal that a stock is expensive relative to its fundamentals. Dividend payout ratio is the percent of company earnings paid out as dividends. View historical data on PT Asiaplast Industries Tbk and its competitors. For the Packaging & Containers industry, the median Dividend Payout Ratio is 0.39 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. PT Asiaplast Industries Tbk's current Dividend Payout Ratio is 0.00. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is PT Asiaplast Industries Tbk stock overvalued right now?
Based on GuruFocus' analysis, PT Asiaplast Industries Tbk (ISX:APLI) is currently considered Significantly Undervalued. The stock's GF Value™ is Rp352.90, compared to a current price of Rp246.00 — trading 30.3% below its estimated fair value. The current Dividend Payout Ratio is 0.00. PT Asiaplast Industries Tbk's overall GF Score™ is 53/100 with 2 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Dividend Payout Ratio calculated?
Dividend Payout Ratio is calculated from a company's financial statements. For PT Asiaplast Industries Tbk (ISX:APLI), the current Dividend Payout Ratio is 0.00 as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is PT Asiaplast Industries Tbk (ISX:APLI) Overvalued in 2026?
Based on GuruFocus' analysis, PT Asiaplast Industries Tbk stock appears to be undervalued.
The current stock price of Rp246.00 is trading 30.3% below its estimated GF Value™ of Rp352.90.
GuruFocus considers PT Asiaplast Industries Tbk to be Significantly Undervalued.
Key valuation signals for ISX:APLI:
Dividend Payout Ratio: 0.00
GF Value™: Rp352.90 vs. price of Rp246.00 (30.3% below fair value)
No single metric tells the full story. See the ISX:APLI stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
PT Asiaplast Industries Tbk is an Indonesian company that operates in the plastic manufacturing industry. It is engaged in the manufacture of plastic products for building materials, packaging, household equipment, and appliances made of plastic (excluding furniture), technical and industrial plastic goods and equipment, as well as other plastic products not elsewhere classified. The company's product portfolio comprises flexible films and sheets, leatherette, rigid films and sheets, polyethylene terephthalate (PET) sheets, polypropylene sheets, and thermoforming plastic products, among others. Geographically, the company derives all of its revenue from the local market.
53GF Score
Get the complete analysis for ISX:APLI
Dividend Payout Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
ISX:APLI has been successfully added to your 
