Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
PT Asiaplast Industries TbkISX:APLI -0.74%49 Dividend Yield % is 16.31% as of Aug. 29, 2026, which is 1499% above its 10-year median of 1.02. GuruFocus rates ISX:APLI with a GF Score™ of 49/100 and a GF Value™ of Rp380.05 (Modestly Undervalued). The stock has 4 warning signs investors should review. Among 240 Packaging & Containers companies, PT Asiaplast Industries Tbk ranks better than 98.75% on this metric.
The historical rank and industry rank for PT Asiaplast Industries Tbk's Dividend Yield % or its related term are showing as below:
ISX:APLI'
s Dividend Yield % Range Over the Past 10 Years
Min: 0.92 Med: 1.02 Max: 18.5
Current: 16.31
During the past 7 years, the highest Dividend Yield of PT Asiaplast Industries Tbk was 18.50%. The lowest was 0.92%. And the median was 1.02%.
ISX:APLI's Dividend Yield % is ranked better than 98.75% of 240
companies
in the Packaging & Containers industry
Industry Median: 2.46
vs ISX:APLI: 16.31
If a company's dividend payout ratio is too high, its dividend may not be sustainable. The dividend payout ratio of PT Asiaplast Industries Tbk is 7.80, which seems too high.
During the past 7 years, the highest Dividend Payout Ratio of PT Asiaplast Industries Tbk was 7.80. The lowest was 0.39. And the median was 0.39.
Over the long term, the return from dividends has been a significant contributor to the total returns produced by equity securities. Studies by Elroy Dimson, Paul Marsh, and Mike Staunton of Princeton University (2002) found that a market-oriented portfolio, which included reinvested dividends, would have generated nearly 85 times the wealth generated by the same portfolio relying solely on capital gains.
Dividends may also qualify a lower tax rate for investors.
In dividends investing, Payout Ratio and Dividend Growth Rate are the two most important variables for consideration. A lower payout ratio may indicate that the company has more room to increase its dividends.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
ISX:APLI vs SW, PKG, IP: Dividend Yield % Comparison
For the Packaging & Containers subindustry, PT Asiaplast Industries Tbk's Dividend Yield %, along with its competitors' market caps and Dividend Yield % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
PT Asiaplast Industries Tbk Dividend Yield % vs Packaging & Containers Industry
For the Packaging & Containers industry and Consumer Cyclical sector, PT Asiaplast Industries Tbk's Dividend Yield % distribution charts can be found below:
* The bar in red indicates where PT Asiaplast Industries Tbk's Dividend Yield % falls into.
Dividend Yield measures how much a company pays out in dividends each year relative to its share price.
PT Asiaplast Industries Tbk Recent Full-Year* Dividend History
Amount
Ex-date
Record Date
Pay Date
Type
Frequency
Forex Rate
IDR 44.030000
2026-06-08
2026-06-09
2026-06-26
Cash Dividend
annually
IDR:IDR 1.000000
* GuruFocus has an internal rule that if the most recent dividend payment frequency is at least 4 times a year, then the full year will be calculated according to the frequency of payment or the one-year time frame, whichever is stricter.
* GuruFocus converts dividend currency to local traded share price currency in order to calculate dividend yield. Please refer to the last column "Forex Rate" in the above table.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
PT Asiaplast Industries Tbk (ISX:APLI) has a Dividend Yield % of 16.31% as of Aug. 29, 2026. Dividend yield is the ratio of company dividends to the share price. View historical data on PT Asiaplast Industries Tbk and its competitors. This is 1499% above median its historical median of 1.02. Over the past decade, PT Asiaplast Industries Tbk's Dividend Yield % has ranged from 0.92 to 18.50. According to the industry distribution chart, PT Asiaplast Industries Tbk ranks #3 out of 240 companies in the Packaging & Containers industry, placing it in the top 1.2%.
Is PT Asiaplast Industries Tbk's Dividend Yield % too high?
PT Asiaplast Industries Tbk's current Dividend Yield % of 16.31% is 1499% above median its 10-year median of 1.02. Over the past 10 years, this metric has ranged from a low of 0.92 to a high of 18.50. The Packaging & Containers industry median Dividend Yield % is 2.46. PT Asiaplast Industries Tbk's value of 16.31% is 563% above this industry median. Based on the distribution chart, PT Asiaplast Industries Tbk ranks #3 out of 240 companies in the Packaging & Containers industry, which is in the top quartile — a strong position relative to peers. Overall, PT Asiaplast Industries Tbk has a GF Score™ of 49/100 and is considered Modestly Undervalued, reflecting its overall financial health beyond just this single metric.
How does PT Asiaplast Industries Tbk's Dividend Yield % compare to SW and PKG?
According to the Packaging & Containers industry distribution chart, PT Asiaplast Industries Tbk ranks #3 out of 240 companies for Dividend Yield %. This places PT Asiaplast Industries Tbk in the top 1% of its industry — outperforming the majority of peers. The industry median Dividend Yield % is 2.46. PT Asiaplast Industries Tbk's value of 16.31% is 563% above this benchmark. Historically, PT Asiaplast Industries Tbk's own Dividend Yield % has ranged from 0.92 to 18.50 over the past decade. While the company's 10-year median is 1.02 vs. the industry median of 2.46, PT Asiaplast Industries Tbk has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Dividend Yield % for a Packaging & Containers company?
The median Dividend Yield % among Packaging & Containers companies is 2.46, based on 240 companies in the industry. Companies in the top quartile (top 25%) have a Dividend Yield % significantly above this median, while those in the bottom quartile fall well below. However, Dividend Yield % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. PT Asiaplast Industries Tbk's current Dividend Yield % of 16.31% is 563% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Dividend Yield % mean?
A high Dividend Yield % can signal that a stock is expensive relative to its fundamentals. Dividend yield is the ratio of company dividends to the share price. View historical data on PT Asiaplast Industries Tbk and its competitors. For the Packaging & Containers industry, the median Dividend Yield % is 2.46 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. PT Asiaplast Industries Tbk's current Dividend Yield % is 16.31%, which is 1499% above median its own 10-year median of 1.02. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is PT Asiaplast Industries Tbk stock overvalued right now?
Based on GuruFocus' analysis, PT Asiaplast Industries Tbk (ISX:APLI) is currently considered Modestly Undervalued. The stock's GF Value™ is Rp380.05, compared to a current price of Rp270.00 — trading 29% below its estimated fair value. The current Dividend Yield % is 16.31%, which is 1499% above median its 10-year median of 1.02 and 563% above the Packaging & Containers industry median of 2.46. PT Asiaplast Industries Tbk's overall GF Score™ is 49/100 with 4 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Dividend Yield % calculated?
Dividend Yield % is calculated from a company's financial statements. For PT Asiaplast Industries Tbk (ISX:APLI), the current Dividend Yield % is 16.31% as of Aug. 29, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is PT Asiaplast Industries Tbk (ISX:APLI) Overvalued in 2026?
Based on GuruFocus' analysis, PT Asiaplast Industries Tbk stock appears to be undervalued.
The current stock price of Rp270.00 is trading 29% below its estimated GF Value™ of Rp380.05.
GuruFocus considers PT Asiaplast Industries Tbk to be Modestly Undervalued.
Key valuation signals for ISX:APLI:
Dividend Yield %: 16.31% (1499% above median its 10-year median of 1.02)
GF Value™: Rp380.05 vs. price of Rp270.00 (29% below fair value)
Industry Position: 563% above the Packaging & Containers median (#3 of 240)
No single metric tells the full story. See the ISX:APLI stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
PT Asiaplast Industries Tbk is an Indonesian company that operates in the plastic manufacturing industry. It is engaged in the manufacture of plastic products for building materials, packaging, household equipment, and appliances made of plastic (excluding furniture), technical and industrial plastic goods and equipment, as well as other plastic products not elsewhere classified. The company's product portfolio comprises flexible films and sheets, leatherette, rigid films and sheets, polyethylene terephthalate (PET) sheets, polypropylene sheets, and thermoforming plastic products, among others. Geographically, the company derives all of its revenue from the local market.
49GF Score
Get the complete analysis for ISX:APLI
Dividend Yield % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
ISX:APLI has been successfully added to your 
