The Dividend Payout Ratio is the measure of dividends paid out to shareholders relative to the company's net income. It is calculated as the Dividends per Share divided by the Earnings per Share (Diluted) during the same time period. PT Gunawan Dianjaya Steel Tbk's Dividend Payout Ratio for the
months ended in Mar. 2026 was 1.74.
The historical rank and industry rank for PT Gunawan Dianjaya Steel Tbk's Dividend Payout Ratio or its related term are showing as below:
ISX:GDST'
s Dividend Payout Ratio Range Over the Past 10 Years
Min: 0.6 Med: 1.13 Max: 1.13
Current: 0.6
During the past 13 years, the highest Dividend Payout Ratio of PT Gunawan Dianjaya Steel Tbk was 1.13. The lowest was 0.60. And the median was 1.13.
ISX:GDST's Dividend Payout Ratio is ranked worse than 69% of 271
companies
in the Steel industry
Industry Median: 0.39
vs ISX:GDST: 0.60
During the past 13 years, the highest Trailing Annual Dividend Yield of PT Gunawan Dianjaya Steel Tbk was 17.76%. The lowest was 2.34%. And the median was 6.52%.
During the past 12 months, PT Gunawan Dianjaya Steel Tbk's average Dividends Per Share Growth Rate was -81.50% per year.
The growth rate is calculated with least square regression.
For more information regarding to dividend, please check our Dividend Page.
* Please note that "special dividend" is not included in the calculation of dividend per share and related fields.
PT Gunawan Dianjaya Steel Tbk (ISX:GDST) Dividend Payout Ratio Explanation
In dividends investing, Dividend Payout Ratio and Dividend Growth Rate are the two most important variables for consideration. A lower payout ratio may indicate that the company has more room to increase its dividends.
PT Gunawan Dianjaya Steel Tbk Dividend Payout Ratio Related Terms
PT Gunawan Dianjaya Steel Tbk Dividend Payout Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
PT Gunawan Dianjaya Steel Tbk Dividend Payout Ratio Chart
ISX:GDST vs NUE, STLD, RS: Dividend Payout Ratio Comparison
For the Steel subindustry, PT Gunawan Dianjaya Steel Tbk's Dividend Payout Ratio, along with its competitors' market caps and Dividend Payout Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
PT Gunawan Dianjaya Steel Tbk Dividend Payout Ratio vs Steel Industry
For the Steel industry and Basic Materials sector, PT Gunawan Dianjaya Steel Tbk's Dividend Payout Ratio distribution charts can be found below:
* The bar in red indicates where PT Gunawan Dianjaya Steel Tbk's Dividend Payout Ratio falls into.
PT Gunawan Dianjaya Steel Tbk Dividend Payout Ratio Calculation
The Dividend Payout Ratio is the measure of dividends paid out to shareholders relative to the company's net income. It is calculated as the Dividends per Share divided by the Earnings per Share (Diluted) during the same time period.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
PT Gunawan Dianjaya Steel Tbk (ISX:GDST) has a Dividend Payout Ratio of 1.74 as of Mar. 2026. Dividend payout ratio is the percent of company earnings paid out as dividends. View historical data on PT Gunawan Dianjaya Steel Tbk and its competitors. This is 54% above median its historical median of 1.13. Over the past decade, PT Gunawan Dianjaya Steel Tbk's Dividend Payout Ratio has ranged from 0.60 to 1.13. According to the industry distribution chart, PT Gunawan Dianjaya Steel Tbk ranks #187 out of 271 companies in the Steel industry, placing it in the top 69%.
Is PT Gunawan Dianjaya Steel Tbk's Dividend Payout Ratio too high?
PT Gunawan Dianjaya Steel Tbk's current Dividend Payout Ratio of 1.74 is 54% above median its 10-year median of 1.13. Over the past 10 years, this metric has ranged from a low of 0.60 to a high of 1.13. The Steel industry median Dividend Payout Ratio is 0.39. PT Gunawan Dianjaya Steel Tbk's value of 1.74 is 346.2% above this industry median. Based on the distribution chart, PT Gunawan Dianjaya Steel Tbk ranks #187 out of 271 companies in the Steel industry, which is below the industry midpoint. Overall, PT Gunawan Dianjaya Steel Tbk has a GF Score™ of 63/100 and is considered Modestly Undervalued, reflecting its overall financial health beyond just this single metric.
How does PT Gunawan Dianjaya Steel Tbk's Dividend Payout Ratio compare to NUE and STLD?
According to the Steel industry distribution chart, PT Gunawan Dianjaya Steel Tbk ranks #187 out of 271 companies for Dividend Payout Ratio. This places PT Gunawan Dianjaya Steel Tbk in the lower half of its industry. The industry median Dividend Payout Ratio is 0.39. PT Gunawan Dianjaya Steel Tbk's value of 1.74 is 346.2% above this benchmark. Historically, PT Gunawan Dianjaya Steel Tbk's own Dividend Payout Ratio has ranged from 0.60 to 1.13 over the past decade. While the company's 10-year median is 1.13 vs. the industry median of 0.39, PT Gunawan Dianjaya Steel Tbk has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Dividend Payout Ratio for a Steel company?
The median Dividend Payout Ratio among Steel companies is 0.39, based on 271 companies in the industry. Companies in the top quartile (top 25%) have a Dividend Payout Ratio significantly above this median, while those in the bottom quartile fall well below. However, Dividend Payout Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. PT Gunawan Dianjaya Steel Tbk's current Dividend Payout Ratio of 1.74 is 346.2% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Dividend Payout Ratio mean?
A high Dividend Payout Ratio can signal that a stock is expensive relative to its fundamentals. Dividend payout ratio is the percent of company earnings paid out as dividends. View historical data on PT Gunawan Dianjaya Steel Tbk and its competitors. For the Steel industry, the median Dividend Payout Ratio is 0.39 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. PT Gunawan Dianjaya Steel Tbk's current Dividend Payout Ratio is 1.74, which is 54% above median its own 10-year median of 1.13. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is PT Gunawan Dianjaya Steel Tbk stock overvalued right now?
Based on GuruFocus' analysis, PT Gunawan Dianjaya Steel Tbk (ISX:GDST) is currently considered Modestly Undervalued. The stock's GF Value™ is Rp89.89, compared to a current price of Rp80.00 — trading 11% below its estimated fair value. The current Dividend Payout Ratio is 1.74, which is 54% above median its 10-year median of 1.13 and 346.2% above the Steel industry median of 0.39. PT Gunawan Dianjaya Steel Tbk's overall GF Score™ is 63/100 with 7 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Dividend Payout Ratio calculated?
Dividend Payout Ratio is calculated from a company's financial statements. For PT Gunawan Dianjaya Steel Tbk (ISX:GDST), the current Dividend Payout Ratio is 1.74 as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is PT Gunawan Dianjaya Steel Tbk (ISX:GDST) Overvalued in 2026?
Based on GuruFocus' analysis, PT Gunawan Dianjaya Steel Tbk stock appears to be undervalued.
The current stock price of Rp80.00 is trading 11% below its estimated GF Value™ of Rp89.89.
GuruFocus considers PT Gunawan Dianjaya Steel Tbk to be Modestly Undervalued.
Key valuation signals for ISX:GDST:
Dividend Payout Ratio: 1.74 (54% above median its 10-year median of 1.13)
GF Value™: Rp89.89 vs. price of Rp80.00 (11% below fair value)
Industry Position: 346.2% above the Steel median (#187 of 271)
No single metric tells the full story. See the ISX:GDST stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
PT Gunawan Dianjaya Steel Tbk Business Description
PT Gunawan Dianjaya Steel Tbk is an Indonesian steel plate manufacturing (re-rolling) company. It is engaged in the manufacture of Hot Rolled Steel Plate. Its products include Low carbon Structural Steel Plates, High Strength Low Alloy Structural Steel Plates, Steel plates for boilers and pressure vessels, Steel plates for ship building including Hull Structural Steel Plates (Mild Steels), and High Strength Hull Structural Steel Plates (High Tensile Steels). It operates in single segment of manufacturing of hot rolled steel in Indonesia.
63GF Score
Get the complete analysis for ISX:GDST
Dividend Payout Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
ISX:GDST has been successfully added to your 
