PT Gunawan Dianjaya Steel Tbk has a quick ratio of 0.78. It indicates that the company cannot currently fully pay back its current liabilities.
The historical rank and industry rank for PT Gunawan Dianjaya Steel Tbk's Quick Ratio or its related term are showing as below:
ISX:GDST'
s Quick Ratio Range Over the Past 10 Years
Min: 0.21 Med: 0.64 Max: 1.29
Current: 0.78
During the past 13 years, PT Gunawan Dianjaya Steel Tbk's highest Quick Ratio was 1.29. The lowest was 0.21. And the median was 0.64.
ISX:GDST's Quick Ratio is ranked worse than 62.54% of 638
companies
in the Steel industry
Industry Median: 1.02
vs ISX:GDST: 0.78
PT Gunawan Dianjaya Steel Tbk (ISX:GDST) Quick Ratio Explanation
The quick ratio is more conservative than the Current Ratio because it excludes inventories from current assets. The ratio derives its name presumably from the fact that assets such as cash and marketable securities are quick sources of cash. Inventories generally take time to be converted into cash, and if they have to be sold quickly, the company may have to accept a lower price than book value of these inventories. As a result, they are justifiably excluded from assets that are ready sources of immediate cash.
In general, low or decreasing quick ratios generally suggest that a company is over-leveraged, struggling to maintain or grow sales, paying bills too quickly or collecting receivables too slowly. On the other hand, a high or increasing quick ratio generally indicates that a company is experiencing solid top-line growth, quickly converting receivables into cash, and easily able to cover its financial obligations. Such companies often have faster inventory turnover and cash conversion cycles.
The higher the quick ratio, the better the company's liquidity position.
PT Gunawan Dianjaya Steel Tbk Quick Ratio Related Terms
PT Gunawan Dianjaya Steel Tbk Quick Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Steel subindustry, PT Gunawan Dianjaya Steel Tbk's Quick Ratio, along with its competitors' market caps and Quick Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
PT Gunawan Dianjaya Steel Tbk Quick Ratio vs Steel Industry
For the Steel industry and Basic Materials sector, PT Gunawan Dianjaya Steel Tbk's Quick Ratio distribution charts can be found below:
* The bar in red indicates where PT Gunawan Dianjaya Steel Tbk's Quick Ratio falls into.
PT Gunawan Dianjaya Steel Tbk Quick Ratio Calculation
The quick ratio measures a company's ability to meet its short-term obligations with its most liquid assets. For this reason, the ratio excludes inventories from current assets.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
PT Gunawan Dianjaya Steel Tbk (ISX:GDST) has a Quick Ratio of 0.78 as of Mar. 2026. Quick ratio is the ratio of current assets less inventory to current liabilities. View historical data on PT Gunawan Dianjaya Steel Tbk and its competitors. This is 22% above median its historical median of 0.64. Over the past decade, PT Gunawan Dianjaya Steel Tbk's Quick Ratio has ranged from 0.21 to 1.29. According to the industry distribution chart, PT Gunawan Dianjaya Steel Tbk ranks #399 out of 638 companies in the Steel industry, placing it in the top 62.5%.
Is PT Gunawan Dianjaya Steel Tbk's Quick Ratio too high?
PT Gunawan Dianjaya Steel Tbk's current Quick Ratio of 0.78 is 22% above median its 10-year median of 0.64. Over the past 10 years, this metric has ranged from a low of 0.21 to a high of 1.29. The Steel industry median Quick Ratio is 1.02. PT Gunawan Dianjaya Steel Tbk's value of 0.78 is 23.5% below this industry median. Based on the distribution chart, PT Gunawan Dianjaya Steel Tbk ranks #399 out of 638 companies in the Steel industry, which is below the industry midpoint. Overall, PT Gunawan Dianjaya Steel Tbk has a GF Score™ of 63/100 and is considered Modestly Undervalued, reflecting its overall financial health beyond just this single metric.
How does PT Gunawan Dianjaya Steel Tbk's Quick Ratio compare to NUE and STLD?
According to the Steel industry distribution chart, PT Gunawan Dianjaya Steel Tbk ranks #399 out of 638 companies for Quick Ratio. This places PT Gunawan Dianjaya Steel Tbk in the lower half of its industry. The industry median Quick Ratio is 1.02. PT Gunawan Dianjaya Steel Tbk's value of 0.78 is 23.5% below this benchmark. Historically, PT Gunawan Dianjaya Steel Tbk's own Quick Ratio has ranged from 0.21 to 1.29 over the past decade. While the company's 10-year median is 0.64 vs. the industry median of 1.02, PT Gunawan Dianjaya Steel Tbk has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Quick Ratio for a Steel company?
The median Quick Ratio among Steel companies is 1.02, based on 638 companies in the industry. Companies in the top quartile (top 25%) have a Quick Ratio significantly above this median, while those in the bottom quartile fall well below. However, Quick Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. PT Gunawan Dianjaya Steel Tbk's current Quick Ratio of 0.78 is 23.5% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Quick Ratio mean?
A high Quick Ratio can signal that a stock is expensive relative to its fundamentals. Quick ratio is the ratio of current assets less inventory to current liabilities. View historical data on PT Gunawan Dianjaya Steel Tbk and its competitors. For the Steel industry, the median Quick Ratio is 1.02 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. PT Gunawan Dianjaya Steel Tbk's current Quick Ratio is 0.78, which is 22% above median its own 10-year median of 0.64. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is PT Gunawan Dianjaya Steel Tbk stock overvalued right now?
Based on GuruFocus' analysis, PT Gunawan Dianjaya Steel Tbk (ISX:GDST) is currently considered Modestly Undervalued. The stock's GF Value™ is Rp89.89, compared to a current price of Rp80.00 — trading 11% below its estimated fair value. The current Quick Ratio is 0.78, which is 22% above median its 10-year median of 0.64 and 23.5% below the Steel industry median of 1.02. PT Gunawan Dianjaya Steel Tbk's overall GF Score™ is 63/100 with 7 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Quick Ratio calculated?
Quick Ratio is calculated from a company's financial statements. For PT Gunawan Dianjaya Steel Tbk (ISX:GDST), the current Quick Ratio is 0.78 as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is PT Gunawan Dianjaya Steel Tbk (ISX:GDST) Overvalued in 2026?
Based on GuruFocus' analysis, PT Gunawan Dianjaya Steel Tbk stock appears to be undervalued.
The current stock price of Rp80.00 is trading 11% below its estimated GF Value™ of Rp89.89.
GuruFocus considers PT Gunawan Dianjaya Steel Tbk to be Modestly Undervalued.
Key valuation signals for ISX:GDST:
Quick Ratio: 0.78 (22% above median its 10-year median of 0.64)
GF Value™: Rp89.89 vs. price of Rp80.00 (11% below fair value)
Industry Position: 23.5% below the Steel median (#399 of 638)
No single metric tells the full story. See the ISX:GDST stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
PT Gunawan Dianjaya Steel Tbk Business Description
PT Gunawan Dianjaya Steel Tbk is an Indonesian steel plate manufacturing (re-rolling) company. It is engaged in the manufacture of Hot Rolled Steel Plate. Its products include Low carbon Structural Steel Plates, High Strength Low Alloy Structural Steel Plates, Steel plates for boilers and pressure vessels, Steel plates for ship building including Hull Structural Steel Plates (Mild Steels), and High Strength Hull Structural Steel Plates (High Tensile Steels). It operates in single segment of manufacturing of hot rolled steel in Indonesia.
63GF Score
Get the complete analysis for ISX:GDST
Quick Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
ISX:GDST has been successfully added to your 
