Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
The Dividend Payout Ratio is the measure of dividends paid out to shareholders relative to the company's net income. It is calculated as the Dividends per Share divided by the Earnings per Share (Diluted) during the same time period. Tachia Yung Ho Machine Industry Co's Dividend Payout Ratio for the
months ended in Dec. 2025 was 0.00.
The historical rank and industry rank for Tachia Yung Ho Machine Industry Co's Dividend Payout Ratio or its related term are showing as below:
ROCO:2221'
s Dividend Payout Ratio Range Over the Past 10 Years
Min: 0.24 Med: 0.59 Max: 1.93
Current: 0.58
During the past 13 years, the highest Dividend Payout Ratio of Tachia Yung Ho Machine Industry Co was 1.93. The lowest was 0.24. And the median was 0.59.
ROCO:2221's Dividend Payout Ratio is ranked worse than 68.4% of 269
companies
in the Steel industry
Industry Median: 0.39
vs ROCO:2221: 0.58
During the past 13 years, the highest Trailing Annual Dividend Yield of Tachia Yung Ho Machine Industry Co was 14.26%. The lowest was 1.70%. And the median was 4.63%.
During the past 3 years, the average Dividends Per Share Growth Rate was -24.30% per year.
During the past 5 years, the average Dividends Per Share Growth Rate was 1.00% per year.
During the past 10 years, the average Dividends Per Share Growth Rate was 11.70% per year.
During the past 13 years, the highest 3-Year average Dividends Per Share Growth Rate of Tachia Yung Ho Machine Industry Co was 68.90% per year. The lowest was -37.90% per year. And the median was 12.50% per year.
The growth rate is calculated with least square regression.
For more information regarding to dividend, please check our Dividend Page.
* Please note that "special dividend" is not included in the calculation of dividend per share and related fields.
Tachia Yung Ho Machine Industry Co (ROCO:2221) Dividend Payout Ratio Explanation
In dividends investing, Dividend Payout Ratio and Dividend Growth Rate are the two most important variables for consideration. A lower payout ratio may indicate that the company has more room to increase its dividends.
Tachia Yung Ho Machine Industry Co Dividend Payout Ratio Related Terms
Tachia Yung Ho Machine Industry Co Dividend Payout Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Tachia Yung Ho Machine Industry Co Dividend Payout Ratio Chart
ROCO:2221 vs NUE, STLD, RS: Dividend Payout Ratio Comparison
For the Steel subindustry, Tachia Yung Ho Machine Industry Co's Dividend Payout Ratio, along with its competitors' market caps and Dividend Payout Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Tachia Yung Ho Machine Industry Co Dividend Payout Ratio vs Steel Industry
For the Steel industry and Basic Materials sector, Tachia Yung Ho Machine Industry Co's Dividend Payout Ratio distribution charts can be found below:
* The bar in red indicates where Tachia Yung Ho Machine Industry Co's Dividend Payout Ratio falls into.
Tachia Yung Ho Machine Industry Co Dividend Payout Ratio Calculation
The Dividend Payout Ratio is the measure of dividends paid out to shareholders relative to the company's net income. It is calculated as the Dividends per Share divided by the Earnings per Share (Diluted) during the same time period.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Tachia Yung Ho Machine Industry Co (ROCO:2221) has a Dividend Payout Ratio of 0.00 as of Dec. 2025. Dividend payout ratio is the percent of company earnings paid out as dividends. View historical data on Tachia Yung Ho Machine Industry Co and its competitors. Over the past decade, Tachia Yung Ho Machine Industry Co's Dividend Payout Ratio has ranged from 0.24 to 1.93. According to the industry distribution chart, Tachia Yung Ho Machine Industry Co ranks #184 out of 269 companies in the Steel industry, placing it in the top 68.4%.
Is Tachia Yung Ho Machine Industry Co's Dividend Payout Ratio too high?
Tachia Yung Ho Machine Industry Co's current Dividend Payout Ratio is 0.00. Over the past 10 years, this metric has ranged from a low of 0.24 to a high of 1.93. Based on the distribution chart, Tachia Yung Ho Machine Industry Co ranks #184 out of 269 companies in the Steel industry, which is below the industry midpoint. Overall, Tachia Yung Ho Machine Industry Co has a GF Score™ of 68/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Tachia Yung Ho Machine Industry Co's Dividend Payout Ratio compare to NUE and STLD?
According to the Steel industry distribution chart, Tachia Yung Ho Machine Industry Co ranks #184 out of 269 companies for Dividend Payout Ratio. This places Tachia Yung Ho Machine Industry Co in the lower half of its industry. The industry median Dividend Payout Ratio is 0.39. Historically, Tachia Yung Ho Machine Industry Co's own Dividend Payout Ratio has ranged from 0.24 to 1.93 over the past decade. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Dividend Payout Ratio for a Steel company?
The median Dividend Payout Ratio among Steel companies is 0.39, based on 269 companies in the industry. Companies in the top quartile (top 25%) have a Dividend Payout Ratio significantly above this median, while those in the bottom quartile fall well below. However, Dividend Payout Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Dividend Payout Ratio mean?
A high Dividend Payout Ratio can signal that a stock is expensive relative to its fundamentals. Dividend payout ratio is the percent of company earnings paid out as dividends. View historical data on Tachia Yung Ho Machine Industry Co and its competitors. For the Steel industry, the median Dividend Payout Ratio is 0.39 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Tachia Yung Ho Machine Industry Co's current Dividend Payout Ratio is 0.00. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Tachia Yung Ho Machine Industry Co stock overvalued right now?
Based on GuruFocus' analysis, Tachia Yung Ho Machine Industry Co (ROCO:2221) is currently considered Significantly Overvalued. The stock's GF Value™ is NT$27.96, compared to a current price of NT$52.60 — trading 88.1% above its estimated fair value. The current Dividend Payout Ratio is 0.00. Tachia Yung Ho Machine Industry Co's overall GF Score™ is 68/100 with 8 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Dividend Payout Ratio calculated?
Dividend Payout Ratio is calculated from a company's financial statements. For Tachia Yung Ho Machine Industry Co (ROCO:2221), the current Dividend Payout Ratio is 0.00 as of Dec. 2025. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Tachia Yung Ho Machine Industry Co (ROCO:2221) Overvalued in 2026?
Based on GuruFocus' analysis, Tachia Yung Ho Machine Industry Co stock appears to be overvalued.
The current stock price of NT$52.60 is trading 88.1% above its estimated GF Value™ of NT$27.96.
GuruFocus considers Tachia Yung Ho Machine Industry Co to be Significantly Overvalued.
Key valuation signals for ROCO:2221:
Dividend Payout Ratio: 0.00
GF Value™: NT$27.96 vs. price of NT$52.60 (88.1% above fair value)
No single metric tells the full story. See the ROCO:2221 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Tachia Yung Ho Machine Industry Co Business Description
Tachia Yung Ho Machine Industry Co Ltd is engaged in the manufacture and distribution of stainless-steel welded pipe fittings and ultra-clean components. Its products include Stainless Steel Pipe and Tube, UHP Face Seal Fitting, Micro Fitting, and others. It derives revenue from its products which include: Ultra High Purity Components; Service Revenue; Stainless Steel Welded Pipe Fittings; and Others.
68GF Score
Get the complete analysis for ROCO:2221
Dividend Payout Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
ROCO:2221 has been successfully added to your 
