The historical rank and industry rank for Tachia Yung Ho Machine Industry Co's Pretax Margin % or its related term are showing as below:
ROCO:2221'
s Pretax Margin % Range Over the Past 10 Years
Min: 8.21 Med: 11.82 Max: 20.48
Current: 9.27
ROCO:2221's Pretax Margin % is ranked better than 80.52% of 611
companies
in the Steel industry
Industry Median: 2.58
vs ROCO:2221: 9.27
Tachia Yung Ho Machine Industry Co (ROCO:2221) Pretax Margin % Explanation
The pretax margin, as know as pretax profit margin, is widely used to measure the operating efficiency of a company before deducting taxes.
The pretax margin is sometimes preferred over the net margin as tax expenditures can make profitability comparisons between companies misleading.
It is a useful tool to compare companies operating in the same sector and less effective when comparing companies from other sectors as each industry generally has different operating expenses and sales patterns.
The long term trend of the pretax margin is a good indicator of the competitiveness and health of the business.
Tachia Yung Ho Machine Industry Co Pretax Margin % Related Terms
Tachia Yung Ho Machine Industry Co Pretax Margin % Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Tachia Yung Ho Machine Industry Co Pretax Margin % Chart
ROCO:2221 vs NUE, STLD, RS: Pretax Margin % Comparison
For the Steel subindustry, Tachia Yung Ho Machine Industry Co's Pretax Margin %, along with its competitors' market caps and Pretax Margin % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Tachia Yung Ho Machine Industry Co Pretax Margin % vs Steel Industry
For the Steel industry and Basic Materials sector, Tachia Yung Ho Machine Industry Co's Pretax Margin % distribution charts can be found below:
* The bar in red indicates where Tachia Yung Ho Machine Industry Co's Pretax Margin % falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Tachia Yung Ho Machine Industry Co (ROCO:2221) has a Pretax Margin % of 9.24% as of Dec. 2025. Pre-Tax margin is the ratio of total pre-tax income to net sales. View historical data on Tachia Yung Ho Machine Industry Co and its competitors. This is 22% below median its historical median of 11.82. Over the past decade, Tachia Yung Ho Machine Industry Co's Pretax Margin % has ranged from 8.21 to 20.48. According to the industry distribution chart, Tachia Yung Ho Machine Industry Co ranks #119 out of 611 companies in the Steel industry, placing it in the top 19.5%.
Is Tachia Yung Ho Machine Industry Co's Pretax Margin % too high?
Tachia Yung Ho Machine Industry Co's current Pretax Margin % of 9.24% is 22% below median its 10-year median of 11.82. Over the past 10 years, this metric has ranged from a low of 8.21 to a high of 20.48. The Steel industry median Pretax Margin % is 2.58. Tachia Yung Ho Machine Industry Co's value of 9.24% is 258.1% above this industry median. Based on the distribution chart, Tachia Yung Ho Machine Industry Co ranks #119 out of 611 companies in the Steel industry, which is in the top quartile — a strong position relative to peers. Overall, Tachia Yung Ho Machine Industry Co has a GF Score™ of 68/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Tachia Yung Ho Machine Industry Co's Pretax Margin % compare to NUE and STLD?
According to the Steel industry distribution chart, Tachia Yung Ho Machine Industry Co ranks #119 out of 611 companies for Pretax Margin %. This places Tachia Yung Ho Machine Industry Co in the top 20% of its industry — outperforming the majority of peers. The industry median Pretax Margin % is 2.58. Tachia Yung Ho Machine Industry Co's value of 9.24% is 258.1% above this benchmark. Historically, Tachia Yung Ho Machine Industry Co's own Pretax Margin % has ranged from 8.21 to 20.48 over the past decade. While the company's 10-year median is 11.82 vs. the industry median of 2.58, Tachia Yung Ho Machine Industry Co has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Pretax Margin % for a Steel company?
The median Pretax Margin % among Steel companies is 2.58, based on 611 companies in the industry. Companies in the top quartile (top 25%) have a Pretax Margin % significantly above this median, while those in the bottom quartile fall well below. However, Pretax Margin % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Tachia Yung Ho Machine Industry Co's current Pretax Margin % of 9.24% is 258.1% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Pretax Margin % mean?
A high Pretax Margin % can signal that a stock is expensive relative to its fundamentals. Pre-Tax margin is the ratio of total pre-tax income to net sales. View historical data on Tachia Yung Ho Machine Industry Co and its competitors. For the Steel industry, the median Pretax Margin % is 2.58 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Tachia Yung Ho Machine Industry Co's current Pretax Margin % is 9.24%, which is 22% below median its own 10-year median of 11.82. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Tachia Yung Ho Machine Industry Co stock overvalued right now?
Based on GuruFocus' analysis, Tachia Yung Ho Machine Industry Co (ROCO:2221) is currently considered Significantly Overvalued. The stock's GF Value™ is NT$27.99, compared to a current price of NT$47.40 — trading 69.3% above its estimated fair value. The current Pretax Margin % is 9.24%, which is 22% below median its 10-year median of 11.82 and 258.1% above the Steel industry median of 2.58. Tachia Yung Ho Machine Industry Co's overall GF Score™ is 68/100 with 8 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Pretax Margin % calculated?
Pretax Margin % is calculated from a company's financial statements. For Tachia Yung Ho Machine Industry Co (ROCO:2221), the current Pretax Margin % is 9.24% as of Dec. 2025. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Tachia Yung Ho Machine Industry Co (ROCO:2221) Overvalued in 2026?
Based on GuruFocus' analysis, Tachia Yung Ho Machine Industry Co stock appears to be overvalued.
The current stock price of NT$47.40 is trading 69.3% above its estimated GF Value™ of NT$27.99.
GuruFocus considers Tachia Yung Ho Machine Industry Co to be Significantly Overvalued.
Key valuation signals for ROCO:2221:
Pretax Margin %: 9.24% (22% below median its 10-year median of 11.82)
GF Value™: NT$27.99 vs. price of NT$47.40 (69.3% above fair value)
Industry Position: 258.1% above the Steel median (#119 of 611)
No single metric tells the full story. See the ROCO:2221 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Tachia Yung Ho Machine Industry Co Business Description
Tachia Yung Ho Machine Industry Co Ltd is engaged in the manufacture and distribution of stainless-steel welded pipe fittings and ultra-clean components. Its products include Stainless Steel Pipe and Tube, UHP Face Seal Fitting, Micro Fitting, and others. It derives revenue from its products which include: Ultra High Purity Components; Service Revenue; Stainless Steel Welded Pipe Fittings; and Others.
68GF Score
Get the complete analysis for ROCO:2221
Pretax Margin % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
ROCO:2221 has been successfully added to your 
