Kings Metal Fiber Technologies CoROCO:6832 79 Dividend Payout Ratio is 1.01 as of Dec. 2025, which is 98% above its 10-year median of 0.51. GuruFocus rates ROCO:6832 with a GF Score™ of 79/100 and a GF Value™ of NT$58.34 (Significantly Overvalued). Among 413 Manufacturing - Apparel & Accessories companies, Kings Metal Fiber Technologies Co ranks worse than 59.81% on this metric.
The Dividend Payout Ratio is the measure of dividends paid out to shareholders relative to the company's net income. It is calculated as the Dividends per Share divided by the Earnings per Share (Diluted) during the same time period. Kings Metal Fiber Technologies Co's Dividend Payout Ratio for the
months ended in Dec. 2025 was 1.01.
The historical rank and industry rank for Kings Metal Fiber Technologies Co's Dividend Payout Ratio or its related term are showing as below:
ROCO:6832'
s Dividend Payout Ratio Range Over the Past 10 Years
Min: 0.4 Med: 0.51 Max: 0.78
Current: 0.54
During the past 8 years, the highest Dividend Payout Ratio of Kings Metal Fiber Technologies Co was 0.78. The lowest was 0.40. And the median was 0.51.
ROCO:6832's Dividend Payout Ratio is ranked worse than 59.81% of 413
companies
in the Manufacturing - Apparel & Accessories industry
Industry Median: 0.43
vs ROCO:6832: 0.54
During the past 8 years, the highest Trailing Annual Dividend Yield of Kings Metal Fiber Technologies Co was 4.09%. The lowest was 1.60%. And the median was 2.65%.
During the past 12 months, Kings Metal Fiber Technologies Co's average Dividends Per Share Growth Rate was 13.30% per year.
During the past 3 years, the average Dividends Per Share Growth Rate was 8.70% per year.
During the past 8 years, the highest 3-Year average Dividends Per Share Growth Rate of Kings Metal Fiber Technologies Co was 8.70% per year. The lowest was -3.20% per year. And the median was 2.75% per year.
The growth rate is calculated with least square regression.
For more information regarding to dividend, please check our Dividend Page.
* Please note that "special dividend" is not included in the calculation of dividend per share and related fields.
Kings Metal Fiber Technologies Co (ROCO:6832) Dividend Payout Ratio Explanation
In dividends investing, Dividend Payout Ratio and Dividend Growth Rate are the two most important variables for consideration. A lower payout ratio may indicate that the company has more room to increase its dividends.
Kings Metal Fiber Technologies Co Dividend Payout Ratio Related Terms
Kings Metal Fiber Technologies Co Dividend Payout Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Kings Metal Fiber Technologies Co Dividend Payout Ratio Chart
Kings Metal Fiber Technologies Co Dividend Payout Ratio Competitor Comparison
For the Textile Manufacturing subindustry, Kings Metal Fiber Technologies Co's Dividend Payout Ratio, along with its competitors' market caps and Dividend Payout Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Kings Metal Fiber Technologies Co Dividend Payout Ratio vs Manufacturing - Apparel & Accessories Industry
For the Manufacturing - Apparel & Accessories industry and Consumer Cyclical sector, Kings Metal Fiber Technologies Co's Dividend Payout Ratio distribution charts can be found below:
* The bar in red indicates where Kings Metal Fiber Technologies Co's Dividend Payout Ratio falls into.
Kings Metal Fiber Technologies Co Dividend Payout Ratio Calculation
The Dividend Payout Ratio is the measure of dividends paid out to shareholders relative to the company's net income. It is calculated as the Dividends per Share divided by the Earnings per Share (Diluted) during the same time period.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Kings Metal Fiber Technologies Co (ROCO:6832) has a Dividend Payout Ratio of 1.01 as of Dec. 2025. Dividend payout ratio is the percent of company earnings paid out as dividends. View historical data on Kings Metal Fiber Technologies Co and its competitors. This is 98% above median its historical median of 0.51. Over the past decade, Kings Metal Fiber Technologies Co's Dividend Payout Ratio has ranged from 0.40 to 0.78. According to the industry distribution chart, Kings Metal Fiber Technologies Co ranks #247 out of 413 companies in the Manufacturing - Apparel & Accessories industry, placing it in the top 59.8%.
Is Kings Metal Fiber Technologies Co's Dividend Payout Ratio too high?
Kings Metal Fiber Technologies Co's current Dividend Payout Ratio of 1.01 is 98% above median its 10-year median of 0.51. Over the past 10 years, this metric has ranged from a low of 0.40 to a high of 0.78. The Manufacturing - Apparel & Accessories industry median Dividend Payout Ratio is 0.43. Kings Metal Fiber Technologies Co's value of 1.01 is 134.9% above this industry median. Based on the distribution chart, Kings Metal Fiber Technologies Co ranks #247 out of 413 companies in the Manufacturing - Apparel & Accessories industry, which is below the industry midpoint. Overall, Kings Metal Fiber Technologies Co has a GF Score™ of 79/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Kings Metal Fiber Technologies Co's Dividend Payout Ratio compare to competitors?
According to the Manufacturing - Apparel & Accessories industry distribution chart, Kings Metal Fiber Technologies Co ranks #247 out of 413 companies for Dividend Payout Ratio. This places Kings Metal Fiber Technologies Co in the lower half of its industry. The industry median Dividend Payout Ratio is 0.43. Kings Metal Fiber Technologies Co's value of 1.01 is 134.9% above this benchmark. Historically, Kings Metal Fiber Technologies Co's own Dividend Payout Ratio has ranged from 0.40 to 0.78 over the past decade. While the company's 10-year median is 0.51 vs. the industry median of 0.43, Kings Metal Fiber Technologies Co has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Dividend Payout Ratio for a Manufacturing - Apparel & Accessories company?
The median Dividend Payout Ratio among Manufacturing - Apparel & Accessories companies is 0.43, based on 413 companies in the industry. Companies in the top quartile (top 25%) have a Dividend Payout Ratio significantly above this median, while those in the bottom quartile fall well below. However, Dividend Payout Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Kings Metal Fiber Technologies Co's current Dividend Payout Ratio of 1.01 is 134.9% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Dividend Payout Ratio mean?
A high Dividend Payout Ratio can signal that a stock is expensive relative to its fundamentals. Dividend payout ratio is the percent of company earnings paid out as dividends. View historical data on Kings Metal Fiber Technologies Co and its competitors. For the Manufacturing - Apparel & Accessories industry, the median Dividend Payout Ratio is 0.43 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Kings Metal Fiber Technologies Co's current Dividend Payout Ratio is 1.01, which is 98% above median its own 10-year median of 0.51. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Kings Metal Fiber Technologies Co stock overvalued right now?
Based on GuruFocus' analysis, Kings Metal Fiber Technologies Co (ROCO:6832) is currently considered Significantly Overvalued. The stock's GF Value™ is NT$58.34, compared to a current price of NT$76.50 — trading 31.1% above its estimated fair value. The current Dividend Payout Ratio is 1.01, which is 98% above median its 10-year median of 0.51 and 134.9% above the Manufacturing - Apparel & Accessories industry median of 0.43. Kings Metal Fiber Technologies Co's overall GF Score™ is 79/100. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Dividend Payout Ratio calculated?
Dividend Payout Ratio is calculated from a company's financial statements. For Kings Metal Fiber Technologies Co (ROCO:6832), the current Dividend Payout Ratio is 1.01 as of Dec. 2025. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Kings Metal Fiber Technologies Co (ROCO:6832) Overvalued in 2026?
Based on GuruFocus' analysis, Kings Metal Fiber Technologies Co stock appears to be overvalued.
The current stock price of NT$76.50 is trading 31.1% above its estimated GF Value™ of NT$58.34.
GuruFocus considers Kings Metal Fiber Technologies Co to be Significantly Overvalued.
Key valuation signals for ROCO:6832:
Dividend Payout Ratio: 1.01 (98% above median its 10-year median of 0.51)
GF Value™: NT$58.34 vs. price of NT$76.50 (31.1% above fair value)
Industry Position: 134.9% above the Manufacturing - Apparel & Accessories median (#247 of 413)
No single metric tells the full story. See the ROCO:6832 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Kings Metal Fiber Technologies Co Business Description
Kings Metal Fiber Technologies Co Ltd is engaged in the business of textiles. Its customer base ranges from glass manufacturing industries to smart clothing retail markets. By transforming stainless steel fibers into soft and smooth textile constructions, the company provides the ideal buffer material for contacting the hot surfaces of glass during its forming process.
79GF Score
Get the complete analysis for ROCO:6832
Dividend Payout Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
ROCO:6832 has been successfully added to your 
