Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Kings Metal Fiber Technologies CoROCO:6832 +2.16%79 5-Year Yield-on-Cost % is 2.45 as of Aug. 15, 2026, which is 7% below its 10-year median of 2.63. GuruFocus rates ROCO:6832 with a GF Score™ of 79/100 and a GF Value™ of NT$58.58 (Modestly Overvalued). Among 526 Manufacturing - Apparel & Accessories companies, Kings Metal Fiber Technologies Co ranks worse than 56.27% on this metric.
The historical rank and industry rank for Kings Metal Fiber Technologies Co's 5-Year Yield-on-Cost % or its related term are showing as below:
ROCO:6832'
s 5-Year Yield-on-Cost % Range Over the Past 10 Years
Min: 1.6 Med: 2.63 Max: 4.09
Current: 2.45
During the past 8 years, Kings Metal Fiber Technologies Co's highest Yield on Cost was 4.09. The lowest was 1.60. And the median was 2.63.
ROCO:6832's 5-Year Yield-on-Cost % is ranked worse than 56.27% of 526
companies
in the Manufacturing - Apparel & Accessories industry
Industry Median: 3.16
vs ROCO:6832: 2.45
Kings Metal Fiber Technologies Co (ROCO:6832) 5-Year Yield-on-Cost % Explanation
Of course the risk here is that the company may not raise its dividends as it did before. The key is to select the companies that can consistently raise its dividends. Usually companies with long history of raising dividends tend to do so.
Kings Metal Fiber Technologies Co 5-Year Yield-on-Cost % Related Terms
Kings Metal Fiber Technologies Co 5-Year Yield-on-Cost % Competitor Comparison
For the Textile Manufacturing subindustry, Kings Metal Fiber Technologies Co's 5-Year Yield-on-Cost %, along with its competitors' market caps and 5-Year Yield-on-Cost % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Kings Metal Fiber Technologies Co 5-Year Yield-on-Cost % vs Manufacturing - Apparel & Accessories Industry
For the Manufacturing - Apparel & Accessories industry and Consumer Cyclical sector, Kings Metal Fiber Technologies Co's 5-Year Yield-on-Cost % distribution charts can be found below:
* The bar in red indicates where Kings Metal Fiber Technologies Co's 5-Year Yield-on-Cost % falls into.
Kings Metal Fiber Technologies Co 5-Year Yield-on-Cost % Calculation
Dividend Yield % and dividend growth of a stock is an important factor for income investors. But if company A raises its dividend constantly faster than company B, company A's future dividend yield might be much higher than Company B's even if their yields are the same now and their stock prices do not change.
Yield on Cost assumes that you buy and the stock today, and hold it for 5 years. If the company raises it dividends at the same rate as it did over the past 5 years, the dividends investors receive annually in 5 years relative to the stock price today.
Kings Metal Fiber Technologies Co (ROCO:6832) has a 5-Year Yield-on-Cost % of 2.45 as of Aug. 15, 2026. 5-Year Yield on Cost measures the expected yield based on a company's current yield and 5-year dividend growth. View historical data on Kings Metal Fiber Technologies Co and its competitors. This is near median its historical median of 2.63. Over the past decade, Kings Metal Fiber Technologies Co's 5-Year Yield-on-Cost % has ranged from 1.60 to 4.09. According to the industry distribution chart, Kings Metal Fiber Technologies Co ranks #296 out of 526 companies in the Manufacturing - Apparel & Accessories industry, placing it in the top 56.3%.
Is Kings Metal Fiber Technologies Co's 5-Year Yield-on-Cost % too high?
Kings Metal Fiber Technologies Co's current 5-Year Yield-on-Cost % of 2.45 is near median its 10-year median of 2.63. Over the past 10 years, this metric has ranged from a low of 1.60 to a high of 4.09. The Manufacturing - Apparel & Accessories industry median 5-Year Yield-on-Cost % is 3.16. Kings Metal Fiber Technologies Co's value of 2.45 is 22.5% below this industry median. Based on the distribution chart, Kings Metal Fiber Technologies Co ranks #296 out of 526 companies in the Manufacturing - Apparel & Accessories industry, which is below the industry midpoint. Overall, Kings Metal Fiber Technologies Co has a GF Score™ of 79/100 and is considered Modestly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Kings Metal Fiber Technologies Co's 5-Year Yield-on-Cost % compare to competitors?
According to the Manufacturing - Apparel & Accessories industry distribution chart, Kings Metal Fiber Technologies Co ranks #296 out of 526 companies for 5-Year Yield-on-Cost %. This places Kings Metal Fiber Technologies Co in the lower half of its industry. The industry median 5-Year Yield-on-Cost % is 3.16. Kings Metal Fiber Technologies Co's value of 2.45 is 22.5% below this benchmark. Historically, Kings Metal Fiber Technologies Co's own 5-Year Yield-on-Cost % has ranged from 1.60 to 4.09 over the past decade. While the company's 10-year median is 2.63 vs. the industry median of 3.16, Kings Metal Fiber Technologies Co has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good 5-Year Yield-on-Cost % for a Manufacturing - Apparel & Accessories company?
The median 5-Year Yield-on-Cost % among Manufacturing - Apparel & Accessories companies is 3.16, based on 526 companies in the industry. Companies in the top quartile (top 25%) have a 5-Year Yield-on-Cost % significantly above this median, while those in the bottom quartile fall well below. However, 5-Year Yield-on-Cost % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Kings Metal Fiber Technologies Co's current 5-Year Yield-on-Cost % of 2.45 is 22.5% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high 5-Year Yield-on-Cost % mean?
A high 5-Year Yield-on-Cost % can signal that a stock is expensive relative to its fundamentals. 5-Year Yield on Cost measures the expected yield based on a company's current yield and 5-year dividend growth. View historical data on Kings Metal Fiber Technologies Co and its competitors. For the Manufacturing - Apparel & Accessories industry, the median 5-Year Yield-on-Cost % is 3.16 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Kings Metal Fiber Technologies Co's current 5-Year Yield-on-Cost % is 2.45, which is near median its own 10-year median of 2.63. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Kings Metal Fiber Technologies Co stock overvalued right now?
Based on GuruFocus' analysis, Kings Metal Fiber Technologies Co (ROCO:6832) is currently considered Modestly Overvalued. The stock's GF Value™ is NT$58.58, compared to a current price of NT$71.00 — trading 21.2% above its estimated fair value. The current 5-Year Yield-on-Cost % is 2.45, which is near median its 10-year median of 2.63 and 22.5% below the Manufacturing - Apparel & Accessories industry median of 3.16. Kings Metal Fiber Technologies Co's overall GF Score™ is 79/100. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is 5-Year Yield-on-Cost % calculated?
5-Year Yield-on-Cost % is calculated from a company's financial statements. For Kings Metal Fiber Technologies Co (ROCO:6832), the current 5-Year Yield-on-Cost % is 2.45 as of Aug. 15, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Kings Metal Fiber Technologies Co (ROCO:6832) Overvalued in 2026?
Based on GuruFocus' analysis, Kings Metal Fiber Technologies Co stock appears to be overvalued.
The current stock price of NT$71.00 is trading 21.2% above its estimated GF Value™ of NT$58.58.
GuruFocus considers Kings Metal Fiber Technologies Co to be Modestly Overvalued.
Key valuation signals for ROCO:6832:
5-Year Yield-on-Cost %: 2.45 (near median its 10-year median of 2.63)
GF Value™: NT$58.58 vs. price of NT$71.00 (21.2% above fair value)
Industry Position: 22.5% below the Manufacturing - Apparel & Accessories median (#296 of 526)
No single metric tells the full story. See the ROCO:6832 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Kings Metal Fiber Technologies Co Ltd is engaged in the business of textiles. Its customer base ranges from glass manufacturing industries to smart clothing retail markets. By transforming stainless steel fibers into soft and smooth textile constructions, the company provides the ideal buffer material for contacting the hot surfaces of glass during its forming process.
79GF Score
Get the complete analysis for ROCO:6832
5-Year Yield-on-Cost % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
ROCO:6832 has been successfully added to your 
