Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Fourth Milling CoSAU:2286 -2.16%23 Dividend Payout Ratio is 1.30 as of Mar. 2026, which is 177% above its 10-year median of 0.47. GuruFocus rates SAU:2286 with a GF Score™ of 23/100. The stock has 3 warning signs investors should review. Among 997 Consumer Packaged Goods companies, Fourth Milling Co ranks worse than 69.61% on this metric.
The Dividend Payout Ratio is the measure of dividends paid out to shareholders relative to the company's net income. It is calculated as the Dividends per Share divided by the Earnings per Share (Diluted) during the same time period. Fourth Milling Co's Dividend Payout Ratio for the
months ended in Mar. 2026 was 1.30.
The historical rank and industry rank for Fourth Milling Co's Dividend Payout Ratio or its related term are showing as below:
SAU:2286'
s Dividend Payout Ratio Range Over the Past 10 Years
Min: 0.34 Med: 0.47 Max: 0.65
Current: 0.65
During the past 3 years, the highest Dividend Payout Ratio of Fourth Milling Co was 0.65. The lowest was 0.34. And the median was 0.47.
SAU:2286's Dividend Payout Ratio is ranked worse than 69.61% of 997
companies
in the Consumer Packaged Goods industry
Industry Median: 0.43
vs SAU:2286: 0.65
During the past 12 months, Fourth Milling Co's average Dividends Per Share Growth Rate was 9.10% per year.
The growth rate is calculated with least square regression.
For more information regarding to dividend, please check our Dividend Page.
* Please note that "special dividend" is not included in the calculation of dividend per share and related fields.
Fourth Milling Co (SAU:2286) Dividend Payout Ratio Explanation
In dividends investing, Dividend Payout Ratio and Dividend Growth Rate are the two most important variables for consideration. A lower payout ratio may indicate that the company has more room to increase its dividends.
Fourth Milling Co Dividend Payout Ratio Related Terms
Fourth Milling Co Dividend Payout Ratio Historical Data
* Premium members only.
The historical data trend for Fourth Milling Co's Dividend Payout Ratio can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
SAU:2286 vs ADM, BG, TSN: Dividend Payout Ratio Comparison
For the Farm Products subindustry, Fourth Milling Co's Dividend Payout Ratio, along with its competitors' market caps and Dividend Payout Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Fourth Milling Co Dividend Payout Ratio vs Consumer Packaged Goods Industry
For the Consumer Packaged Goods industry and Consumer Defensive sector, Fourth Milling Co's Dividend Payout Ratio distribution charts can be found below:
* The bar in red indicates where Fourth Milling Co's Dividend Payout Ratio falls into.
Fourth Milling Co Dividend Payout Ratio Calculation
The Dividend Payout Ratio is the measure of dividends paid out to shareholders relative to the company's net income. It is calculated as the Dividends per Share divided by the Earnings per Share (Diluted) during the same time period.
Fourth Milling Co's Dividend Payout Ratio for the fiscal year that ended in Dec. 2025 is calculated as
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Fourth Milling Co (SAU:2286) has a Dividend Payout Ratio of 1.30 as of Mar. 2026. Dividend payout ratio is the percent of company earnings paid out as dividends. View historical data on Fourth Milling Co and its competitors. This is 177% above median its historical median of 0.47. Over the past decade, Fourth Milling Co's Dividend Payout Ratio has ranged from 0.34 to 0.65. According to the industry distribution chart, Fourth Milling Co ranks #694 out of 997 companies in the Consumer Packaged Goods industry, placing it in the top 69.6%.
Is Fourth Milling Co's Dividend Payout Ratio too high?
Fourth Milling Co's current Dividend Payout Ratio of 1.30 is 177% above median its 10-year median of 0.47. Over the past 10 years, this metric has ranged from a low of 0.34 to a high of 0.65. The Consumer Packaged Goods industry median Dividend Payout Ratio is 0.43. Fourth Milling Co's value of 1.30 is 202.3% above this industry median. Based on the distribution chart, Fourth Milling Co ranks #694 out of 997 companies in the Consumer Packaged Goods industry, which is below the industry midpoint. Overall, Fourth Milling Co has a GF Score™ of 23/100, reflecting its overall financial health beyond just this single metric.
How does Fourth Milling Co's Dividend Payout Ratio compare to ADM and BG?
According to the Consumer Packaged Goods industry distribution chart, Fourth Milling Co ranks #694 out of 997 companies for Dividend Payout Ratio. This places Fourth Milling Co in the lower half of its industry. The industry median Dividend Payout Ratio is 0.43. Fourth Milling Co's value of 1.30 is 202.3% above this benchmark. Historically, Fourth Milling Co's own Dividend Payout Ratio has ranged from 0.34 to 0.65 over the past decade. While the company's 10-year median is 0.47 vs. the industry median of 0.43, Fourth Milling Co has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Dividend Payout Ratio for a Consumer Packaged Goods company?
The median Dividend Payout Ratio among Consumer Packaged Goods companies is 0.43, based on 997 companies in the industry. Companies in the top quartile (top 25%) have a Dividend Payout Ratio significantly above this median, while those in the bottom quartile fall well below. However, Dividend Payout Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Fourth Milling Co's current Dividend Payout Ratio of 1.30 is 202.3% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Dividend Payout Ratio mean?
A high Dividend Payout Ratio can signal that a stock is expensive relative to its fundamentals. Dividend payout ratio is the percent of company earnings paid out as dividends. View historical data on Fourth Milling Co and its competitors. For the Consumer Packaged Goods industry, the median Dividend Payout Ratio is 0.43 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Fourth Milling Co's current Dividend Payout Ratio is 1.30, which is 177% above median its own 10-year median of 0.47. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Fourth Milling Co stock overvalued right now?
Fourth Milling Co (SAU:2286) has a current Dividend Payout Ratio of 1.30. The current Dividend Payout Ratio is 1.30, which is 177% above median its 10-year median of 0.47 and 202.3% above the Consumer Packaged Goods industry median of 0.43. Fourth Milling Co's overall GF Score™ is 23/100 with 3 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Dividend Payout Ratio calculated?
Dividend Payout Ratio is calculated from a company's financial statements. For Fourth Milling Co (SAU:2286), the current Dividend Payout Ratio is 1.30 as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Fourth Milling Co licensed activities include the packing and milling of wheat, maize, barley, rice, flour, meal, bulgur wheat, oats, dried leguminous vegetables, edible nuts, and corn, as well as the production of flour from rice and the manufacture of starch from corn and potatoes. It also manufactures bakery products such as bread, cakes, biscuits, pies, breakfast cereals, popcorn, frozen bakery items, and traditional desserts. In addition, the Company produces animal feed, including cattle, poultry, birds, and pet feed, along with non-medicinal feed additives. The Company is also engaged in freight transport by road, storage and warehousing of grain, silos, flour, and agricultural products, as well as the wholesale and retail of grains, feed, bakery products, and food and beverages.
23GF Score
Get the complete analysis for SAU:2286
Dividend Payout Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
SAU:2286 has been successfully added to your 
