The Dividend Payout Ratio is the measure of dividends paid out to shareholders relative to the company's net income. It is calculated as the Dividends per Share divided by the Earnings per Share (Diluted) during the same time period. Changshu Fengfan Power Equipment Co's Dividend Payout Ratio for the
months ended in Mar. 2026 was 0.00.
The historical rank and industry rank for Changshu Fengfan Power Equipment Co's Dividend Payout Ratio or its related term are showing as below:
SHSE:601700'
s Dividend Payout Ratio Range Over the Past 10 Years
Min: 0.18 Med: 1.25 Max: 10
Current: 0.24
During the past 13 years, the highest Dividend Payout Ratio of Changshu Fengfan Power Equipment Co was 10.00. The lowest was 0.18. And the median was 1.25.
SHSE:601700's Dividend Payout Ratio is ranked better than 72.44% of 1720
companies
in the Industrial Products industry
Industry Median: 0.37
vs SHSE:601700: 0.24
During the past 13 years, the highest Trailing Annual Dividend Yield of Changshu Fengfan Power Equipment Co was 4.52%. The lowest was 0.19%. And the median was 1.71%.
During the past 12 months, Changshu Fengfan Power Equipment Co's average Dividends Per Share Growth Rate was -60.00% per year.
During the past 3 years, the average Dividends Per Share Growth Rate was -26.30% per year.
During the past 13 years, the highest 3-Year average Dividends Per Share Growth Rate of Changshu Fengfan Power Equipment Co was 62.60% per year. The lowest was -34.80% per year. And the median was 2.70% per year.
The growth rate is calculated with least square regression.
For more information regarding to dividend, please check our Dividend Page.
* Please note that "special dividend" is not included in the calculation of dividend per share and related fields.
Changshu Fengfan Power Equipment Co (SHSE:601700) Dividend Payout Ratio Explanation
In dividends investing, Dividend Payout Ratio and Dividend Growth Rate are the two most important variables for consideration. A lower payout ratio may indicate that the company has more room to increase its dividends.
Changshu Fengfan Power Equipment Co Dividend Payout Ratio Related Terms
Changshu Fengfan Power Equipment Co Dividend Payout Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Changshu Fengfan Power Equipment Co Dividend Payout Ratio Chart
SHSE:601700 vs CRS, ATI, MLI: Dividend Payout Ratio Comparison
For the Metal Fabrication subindustry, Changshu Fengfan Power Equipment Co's Dividend Payout Ratio, along with its competitors' market caps and Dividend Payout Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Changshu Fengfan Power Equipment Co Dividend Payout Ratio vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Changshu Fengfan Power Equipment Co's Dividend Payout Ratio distribution charts can be found below:
* The bar in red indicates where Changshu Fengfan Power Equipment Co's Dividend Payout Ratio falls into.
Changshu Fengfan Power Equipment Co Dividend Payout Ratio Calculation
The Dividend Payout Ratio is the measure of dividends paid out to shareholders relative to the company's net income. It is calculated as the Dividends per Share divided by the Earnings per Share (Diluted) during the same time period.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Changshu Fengfan Power Equipment Co (SHSE:601700) has a Dividend Payout Ratio of 0.00 as of Mar. 2026. Dividend payout ratio is the percent of company earnings paid out as dividends. View historical data on Changshu Fengfan Power Equipment Co and its competitors. Over the past decade, Changshu Fengfan Power Equipment Co's Dividend Payout Ratio has ranged from 0.18 to 10.00. According to the industry distribution chart, Changshu Fengfan Power Equipment Co ranks #474 out of 1720 companies in the Industrial Products industry, placing it in the top 27.6%.
Is Changshu Fengfan Power Equipment Co's Dividend Payout Ratio too high?
Changshu Fengfan Power Equipment Co's current Dividend Payout Ratio is 0.00. Over the past 10 years, this metric has ranged from a low of 0.18 to a high of 10.00. Based on the distribution chart, Changshu Fengfan Power Equipment Co ranks #474 out of 1720 companies in the Industrial Products industry, which is above the industry midpoint. Overall, Changshu Fengfan Power Equipment Co has a GF Score™ of 61/100 and is considered Modestly Undervalued, reflecting its overall financial health beyond just this single metric.
How does Changshu Fengfan Power Equipment Co's Dividend Payout Ratio compare to CRS and ATI?
According to the Industrial Products industry distribution chart, Changshu Fengfan Power Equipment Co ranks #474 out of 1720 companies for Dividend Payout Ratio. This puts Changshu Fengfan Power Equipment Co in the upper half of its industry. The industry median Dividend Payout Ratio is 0.37. Historically, Changshu Fengfan Power Equipment Co's own Dividend Payout Ratio has ranged from 0.18 to 10.00 over the past decade. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Dividend Payout Ratio for an Industrial Products company?
The median Dividend Payout Ratio among Industrial Products companies is 0.37, based on 1,720 companies in the industry. Companies in the top quartile (top 25%) have a Dividend Payout Ratio significantly above this median, while those in the bottom quartile fall well below. However, Dividend Payout Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Dividend Payout Ratio mean?
A high Dividend Payout Ratio can signal that a stock is expensive relative to its fundamentals. Dividend payout ratio is the percent of company earnings paid out as dividends. View historical data on Changshu Fengfan Power Equipment Co and its competitors. For the Industrial Products industry, the median Dividend Payout Ratio is 0.37 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Changshu Fengfan Power Equipment Co's current Dividend Payout Ratio is 0.00. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Changshu Fengfan Power Equipment Co stock overvalued right now?
Based on GuruFocus' analysis, Changshu Fengfan Power Equipment Co (SHSE:601700) is currently considered Modestly Undervalued. The stock's GF Value™ is ¥5.45, compared to a current price of ¥4.47 — trading 18% below its estimated fair value. The current Dividend Payout Ratio is 0.00. Changshu Fengfan Power Equipment Co's overall GF Score™ is 61/100 with 8 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Dividend Payout Ratio calculated?
Dividend Payout Ratio is calculated from a company's financial statements. For Changshu Fengfan Power Equipment Co (SHSE:601700), the current Dividend Payout Ratio is 0.00 as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Changshu Fengfan Power Equipment Co (SHSE:601700) Overvalued in 2026?
Based on GuruFocus' analysis, Changshu Fengfan Power Equipment Co stock appears to be undervalued.
The current stock price of ¥4.47 is trading 18% below its estimated GF Value™ of ¥5.45.
GuruFocus considers Changshu Fengfan Power Equipment Co to be Modestly Undervalued.
Key valuation signals for SHSE:601700:
Dividend Payout Ratio: 0.00
GF Value™: ¥5.45 vs. price of ¥4.47 (18% below fair value)
No single metric tells the full story. See the SHSE:601700 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Changshu Fengfan Power Equipment Co Business Description
Changshu Fengfan Power Equipment Co Ltd manufactures and supplies galvanized steel towers in China. It offers transmission towers, including angle steel, spanning, and steel tube towers, as well as independent poles; substation frameworks; communication towers; crane and wind power bases; and lamp poles, tin trunks, scaffolds, and sledges. The company provides its products for high-pressure or ultra-high-pressure power transmission lines, steel tube towers, steel tube poles, transformer substation frameworks, and other steel-supporting structures.
61GF Score
Get the complete analysis for SHSE:601700
Dividend Payout Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
SHSE:601700 has been successfully added to your 
