The Dividend Payout Ratio is the measure of dividends paid out to shareholders relative to the company's net income. It is calculated as the Dividends per Share divided by the Earnings per Share (Diluted) during the same time period. Min Aik Technology Co's Dividend Payout Ratio for the
months ended in Dec. 2025 was 0.00.
The historical rank and industry rank for Min Aik Technology Co's Dividend Payout Ratio or its related term are showing as below:
During the past 13 years, the highest Dividend Payout Ratio of Min Aik Technology Co was 4.05. The lowest was 0.65. And the median was 3.41.
TPE:3060's Dividend Payout Ratio is not ranked *
in the Hardware industry.
Industry Median: 0.47 * Ranked among companies with meaningful Dividend Payout Ratio only.
During the past 13 years, the highest Trailing Annual Dividend Yield of Min Aik Technology Co was 14.13%. The lowest was 0.83%. And the median was 4.24%.
During the past 12 months, Min Aik Technology Co's average Dividends Per Share Growth Rate was 40.00% per year.
During the past 3 years, the average Dividends Per Share Growth Rate was -29.50% per year.
During the past 13 years, the highest 3-Year average Dividends Per Share Growth Rate of Min Aik Technology Co was 32.10% per year. The lowest was -35.20% per year. And the median was -15.10% per year.
The growth rate is calculated with least square regression.
For more information regarding to dividend, please check our Dividend Page.
* Please note that "special dividend" is not included in the calculation of dividend per share and related fields.
Min Aik Technology Co (TPE:3060) Dividend Payout Ratio Explanation
In dividends investing, Dividend Payout Ratio and Dividend Growth Rate are the two most important variables for consideration. A lower payout ratio may indicate that the company has more room to increase its dividends.
Min Aik Technology Co Dividend Payout Ratio Related Terms
Min Aik Technology Co Dividend Payout Ratio Historical Data
* Premium members only.
The historical data trend for Min Aik Technology Co's Dividend Payout Ratio can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
TPE:3060 vs APH, GLW: Dividend Payout Ratio Comparison
For the Electronic Components subindustry, Min Aik Technology Co's Dividend Payout Ratio, along with its competitors' market caps and Dividend Payout Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Min Aik Technology Co Dividend Payout Ratio vs Hardware Industry
For the Hardware industry and Technology sector, Min Aik Technology Co's Dividend Payout Ratio distribution charts can be found below:
* The bar in red indicates where Min Aik Technology Co's Dividend Payout Ratio falls into.
Min Aik Technology Co Dividend Payout Ratio Calculation
The Dividend Payout Ratio is the measure of dividends paid out to shareholders relative to the company's net income. It is calculated as the Dividends per Share divided by the Earnings per Share (Diluted) during the same time period.
Min Aik Technology Co's Dividend Payout Ratio for the fiscal year that ended in Dec. 2025 is calculated as
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Min Aik Technology Co (TPE:3060) has a Dividend Payout Ratio of 0.00 as of Dec. 2025. Dividend payout ratio is the percent of company earnings paid out as dividends. View historical data on Min Aik Technology Co and its competitors. Over the past decade, Min Aik Technology Co's Dividend Payout Ratio has ranged from 0.65 to 4.05. According to the industry distribution chart, Min Aik Technology Co ranks #999999 out of 1212 companies in the Hardware industry.
Is Min Aik Technology Co's Dividend Payout Ratio too high?
Min Aik Technology Co's current Dividend Payout Ratio is 0.00. Over the past 10 years, this metric has ranged from a low of 0.65 to a high of 4.05. Based on the distribution chart, Min Aik Technology Co ranks #999999 out of 1212 companies in the Hardware industry, which is in the bottom quartile relative to peers. Overall, Min Aik Technology Co has a GF Score™ of 64/100 and is considered Modestly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Min Aik Technology Co's Dividend Payout Ratio compare to APH and GLW?
According to the Hardware industry distribution chart, Min Aik Technology Co ranks #999999 out of 1212 companies for Dividend Payout Ratio. This places Min Aik Technology Co in the lower half of its industry. The industry median Dividend Payout Ratio is 0.47. Historically, Min Aik Technology Co's own Dividend Payout Ratio has ranged from 0.65 to 4.05 over the past decade. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Dividend Payout Ratio for a Hardware company?
The median Dividend Payout Ratio among Hardware companies is 0.47, based on 1,212 companies in the industry. Companies in the top quartile (top 25%) have a Dividend Payout Ratio significantly above this median, while those in the bottom quartile fall well below. However, Dividend Payout Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Dividend Payout Ratio mean?
A high Dividend Payout Ratio can signal that a stock is expensive relative to its fundamentals. Dividend payout ratio is the percent of company earnings paid out as dividends. View historical data on Min Aik Technology Co and its competitors. For the Hardware industry, the median Dividend Payout Ratio is 0.47 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Min Aik Technology Co's current Dividend Payout Ratio is 0.00. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Min Aik Technology Co stock overvalued right now?
Based on GuruFocus' analysis, Min Aik Technology Co (TPE:3060) is currently considered Modestly Overvalued. The stock's GF Value™ is NT$30.05, compared to a current price of NT$35.55 — trading 18.3% above its estimated fair value. The current Dividend Payout Ratio is 0.00. Min Aik Technology Co's overall GF Score™ is 64/100 with 7 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Dividend Payout Ratio calculated?
Dividend Payout Ratio is calculated from a company's financial statements. For Min Aik Technology Co (TPE:3060), the current Dividend Payout Ratio is 0.00 as of Dec. 2025. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Min Aik Technology Co (TPE:3060) Overvalued in 2026?
Based on GuruFocus' analysis, Min Aik Technology Co stock appears to be overvalued.
The current stock price of NT$35.55 is trading 18.3% above its estimated GF Value™ of NT$30.05.
GuruFocus considers Min Aik Technology Co to be Modestly Overvalued.
Key valuation signals for TPE:3060:
Dividend Payout Ratio: 0.00
GF Value™: NT$30.05 vs. price of NT$35.55 (18.3% above fair value)
No single metric tells the full story. See the TPE:3060 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Min Aik Technology Co Ltd is involved in the design, manufacture, and sale of hard disk drive components, plastic camera components, medical device parts, and mechanical components for optical devices. Its operating segments are EMS (Electronics Manufacturing Service), which is the key revenue driver, which includes designing and manufacturing consumer electronics end products; the Automatic Equipment Service segment includes designing and manufacturing automatic machinery for industrial use; and the Commerce Service segment includes trading business. The company's geographical segments include Thailand, which is its key revenue-generating market, Singapore, Taiwan, the United States, and others.
64GF Score
Get the complete analysis for TPE:3060
Dividend Payout Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TPE:3060 has been successfully added to your 
