Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
The Dividend Payout Ratio is the measure of dividends paid out to shareholders relative to the company's net income. It is calculated as the Dividends per Share divided by the Earnings per Share (Diluted) during the same time period. General Plastic Industrial Co's Dividend Payout Ratio for the
months ended in Dec. 2025 was 0.00.
The historical rank and industry rank for General Plastic Industrial Co's Dividend Payout Ratio or its related term are showing as below:
During the past 13 years, the highest Dividend Payout Ratio of General Plastic Industrial Co was 1.80. The lowest was 0.38. And the median was 0.71.
TPE:6128's Dividend Payout Ratio is not ranked *
in the Industrial Products industry.
Industry Median: 0.37 * Ranked among companies with meaningful Dividend Payout Ratio only.
During the past 13 years, the highest Trailing Annual Dividend Yield of General Plastic Industrial Co was 13.30%. The lowest was 1.41%. And the median was 6.91%.
During the past 3 years, the average Dividends Per Share Growth Rate was 7.70% per year.
During the past 5 years, the average Dividends Per Share Growth Rate was 9.10% per year.
During the past 10 years, the average Dividends Per Share Growth Rate was 0.50% per year.
During the past 13 years, the highest 3-Year average Dividends Per Share Growth Rate of General Plastic Industrial Co was 35.70% per year. The lowest was -42.90% per year. And the median was 1.90% per year.
The growth rate is calculated with least square regression.
For more information regarding to dividend, please check our Dividend Page.
* Please note that "special dividend" is not included in the calculation of dividend per share and related fields.
General Plastic Industrial Co (TPE:6128) Dividend Payout Ratio Explanation
In dividends investing, Dividend Payout Ratio and Dividend Growth Rate are the two most important variables for consideration. A lower payout ratio may indicate that the company has more room to increase its dividends.
General Plastic Industrial Co Dividend Payout Ratio Related Terms
General Plastic Industrial Co Dividend Payout Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
General Plastic Industrial Co Dividend Payout Ratio Chart
General Plastic Industrial Co Dividend Payout Ratio Competitor Comparison
For the Business Equipment & Supplies subindustry, General Plastic Industrial Co's Dividend Payout Ratio, along with its competitors' market caps and Dividend Payout Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
General Plastic Industrial Co Dividend Payout Ratio vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, General Plastic Industrial Co's Dividend Payout Ratio distribution charts can be found below:
* The bar in red indicates where General Plastic Industrial Co's Dividend Payout Ratio falls into.
General Plastic Industrial Co Dividend Payout Ratio Calculation
The Dividend Payout Ratio is the measure of dividends paid out to shareholders relative to the company's net income. It is calculated as the Dividends per Share divided by the Earnings per Share (Diluted) during the same time period.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
General Plastic Industrial Co (TPE:6128) has a Dividend Payout Ratio of 0.00 as of Dec. 2025. Dividend payout ratio is the percent of company earnings paid out as dividends. View historical data on General Plastic Industrial Co and its competitors. Over the past decade, General Plastic Industrial Co's Dividend Payout Ratio has ranged from 0.38 to 1.80. According to the industry distribution chart, General Plastic Industrial Co ranks #999999 out of 1720 companies in the Industrial Products industry.
Is General Plastic Industrial Co's Dividend Payout Ratio too high?
General Plastic Industrial Co's current Dividend Payout Ratio is 0.00. Over the past 10 years, this metric has ranged from a low of 0.38 to a high of 1.80. Based on the distribution chart, General Plastic Industrial Co ranks #999999 out of 1720 companies in the Industrial Products industry, which is in the bottom quartile relative to peers. Overall, General Plastic Industrial Co has a GF Score™ of 73/100 and is considered Possible Value Trap, reflecting its overall financial health beyond just this single metric.
How does General Plastic Industrial Co's Dividend Payout Ratio compare to competitors?
According to the Industrial Products industry distribution chart, General Plastic Industrial Co ranks #999999 out of 1720 companies for Dividend Payout Ratio. This places General Plastic Industrial Co in the lower half of its industry. The industry median Dividend Payout Ratio is 0.37. Historically, General Plastic Industrial Co's own Dividend Payout Ratio has ranged from 0.38 to 1.80 over the past decade. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Dividend Payout Ratio for an Industrial Products company?
The median Dividend Payout Ratio among Industrial Products companies is 0.37, based on 1,720 companies in the industry. Companies in the top quartile (top 25%) have a Dividend Payout Ratio significantly above this median, while those in the bottom quartile fall well below. However, Dividend Payout Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Dividend Payout Ratio mean?
A high Dividend Payout Ratio can signal that a stock is expensive relative to its fundamentals. Dividend payout ratio is the percent of company earnings paid out as dividends. View historical data on General Plastic Industrial Co and its competitors. For the Industrial Products industry, the median Dividend Payout Ratio is 0.37 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. General Plastic Industrial Co's current Dividend Payout Ratio is 0.00. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is General Plastic Industrial Co stock overvalued right now?
Based on GuruFocus' analysis, General Plastic Industrial Co (TPE:6128) is currently considered Possible Value Trap. The stock's GF Value™ is NT$32.82, compared to a current price of NT$20.10 — trading 38.8% below its estimated fair value. The current Dividend Payout Ratio is 0.00. General Plastic Industrial Co's overall GF Score™ is 73/100 with 7 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Dividend Payout Ratio calculated?
Dividend Payout Ratio is calculated from a company's financial statements. For General Plastic Industrial Co (TPE:6128), the current Dividend Payout Ratio is 0.00 as of Dec. 2025. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is General Plastic Industrial Co (TPE:6128) Overvalued in 2026?
Based on GuruFocus' analysis, General Plastic Industrial Co stock appears to be undervalued.
The current stock price of NT$20.10 is trading 38.8% below its estimated GF Value™ of NT$32.82.
GuruFocus considers General Plastic Industrial Co to be Possible Value Trap.
Key valuation signals for TPE:6128:
Dividend Payout Ratio: 0.00
GF Value™: NT$32.82 vs. price of NT$20.10 (38.8% below fair value)
No single metric tells the full story. See the TPE:6128 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
General Plastic Industrial Co Business Description
General Plastic Industrial Co Ltd is a Taiwan-based company mainly engaged in manufacturing and selling toner cartridges of photocopiers, laser printers, OPC drum gears, and other related businesses. The company's operating segments include: the Office Imaging Equipment Supplies segment, which derives key revenue, and the Other Operations segment. Geographically, the company generates a majority of its revenue from the United States and the rest from the Netherlands, Italy, Mexico, France, and other countries.
73GF Score
Get the complete analysis for TPE:6128
Dividend Payout Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TPE:6128 has been successfully added to your 
