Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
General Plastic Industrial CoTPE:6128 -0.25%72 5-Year Yield-on-Cost % is 3.82 as of Aug. 05, 2026, which is 64% below its 10-year median of 10.71. GuruFocus rates TPE:6128 with a GF Score™ of 72/100 and a GF Value™ of NT$32.65 (Possible Value Trap). The stock has 7 warning signs investors should review. Among 1,916 Industrial Products companies, General Plastic Industrial Co ranks better than 69.94% on this metric.
The historical rank and industry rank for General Plastic Industrial Co's 5-Year Yield-on-Cost % or its related term are showing as below:
TPE:6128'
s 5-Year Yield-on-Cost % Range Over the Past 10 Years
Min: 2.18 Med: 10.71 Max: 20.56
Current: 3.82
During the past 13 years, General Plastic Industrial Co's highest Yield on Cost was 20.56. The lowest was 2.18. And the median was 10.71.
TPE:6128's 5-Year Yield-on-Cost % is ranked better than 69.94% of 1916
companies
in the Industrial Products industry
Industry Median: 1.94
vs TPE:6128: 3.82
General Plastic Industrial Co (TPE:6128) 5-Year Yield-on-Cost % Explanation
Of course the risk here is that the company may not raise its dividends as it did before. The key is to select the companies that can consistently raise its dividends. Usually companies with long history of raising dividends tend to do so.
General Plastic Industrial Co 5-Year Yield-on-Cost % Related Terms
General Plastic Industrial Co 5-Year Yield-on-Cost % Competitor Comparison
For the Business Equipment & Supplies subindustry, General Plastic Industrial Co's 5-Year Yield-on-Cost %, along with its competitors' market caps and 5-Year Yield-on-Cost % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
General Plastic Industrial Co 5-Year Yield-on-Cost % vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, General Plastic Industrial Co's 5-Year Yield-on-Cost % distribution charts can be found below:
* The bar in red indicates where General Plastic Industrial Co's 5-Year Yield-on-Cost % falls into.
General Plastic Industrial Co 5-Year Yield-on-Cost % Calculation
Dividend Yield % and dividend growth of a stock is an important factor for income investors. But if company A raises its dividend constantly faster than company B, company A's future dividend yield might be much higher than Company B's even if their yields are the same now and their stock prices do not change.
Yield on Cost assumes that you buy and the stock today, and hold it for 5 years. If the company raises it dividends at the same rate as it did over the past 5 years, the dividends investors receive annually in 5 years relative to the stock price today.
General Plastic Industrial Co (TPE:6128) has a 5-Year Yield-on-Cost % of 3.82 as of Aug. 05, 2026. 5-Year Yield on Cost measures the expected yield based on a company's current yield and 5-year dividend growth. View historical data on General Plastic Industrial Co and its competitors. This is 64% below median its historical median of 10.71. Over the past decade, General Plastic Industrial Co's 5-Year Yield-on-Cost % has ranged from 2.18 to 20.56. According to the industry distribution chart, General Plastic Industrial Co ranks #576 out of 1916 companies in the Industrial Products industry, placing it in the top 30.1%.
Is General Plastic Industrial Co's 5-Year Yield-on-Cost % too high?
General Plastic Industrial Co's current 5-Year Yield-on-Cost % of 3.82 is 64% below median its 10-year median of 10.71. Over the past 10 years, this metric has ranged from a low of 2.18 to a high of 20.56. The Industrial Products industry median 5-Year Yield-on-Cost % is 1.94. General Plastic Industrial Co's value of 3.82 is 96.9% above this industry median. Based on the distribution chart, General Plastic Industrial Co ranks #576 out of 1916 companies in the Industrial Products industry, which is above the industry midpoint. Overall, General Plastic Industrial Co has a GF Score™ of 72/100 and is considered Possible Value Trap, reflecting its overall financial health beyond just this single metric.
How does General Plastic Industrial Co's 5-Year Yield-on-Cost % compare to competitors?
According to the Industrial Products industry distribution chart, General Plastic Industrial Co ranks #576 out of 1916 companies for 5-Year Yield-on-Cost %. This puts General Plastic Industrial Co in the upper half of its industry. The industry median 5-Year Yield-on-Cost % is 1.94. General Plastic Industrial Co's value of 3.82 is 96.9% above this benchmark. Historically, General Plastic Industrial Co's own 5-Year Yield-on-Cost % has ranged from 2.18 to 20.56 over the past decade. While the company's 10-year median is 10.71 vs. the industry median of 1.94, General Plastic Industrial Co has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good 5-Year Yield-on-Cost % for an Industrial Products company?
The median 5-Year Yield-on-Cost % among Industrial Products companies is 1.94, based on 1,916 companies in the industry. Companies in the top quartile (top 25%) have a 5-Year Yield-on-Cost % significantly above this median, while those in the bottom quartile fall well below. However, 5-Year Yield-on-Cost % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. General Plastic Industrial Co's current 5-Year Yield-on-Cost % of 3.82 is 96.9% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high 5-Year Yield-on-Cost % mean?
A high 5-Year Yield-on-Cost % can signal that a stock is expensive relative to its fundamentals. 5-Year Yield on Cost measures the expected yield based on a company's current yield and 5-year dividend growth. View historical data on General Plastic Industrial Co and its competitors. For the Industrial Products industry, the median 5-Year Yield-on-Cost % is 1.94 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. General Plastic Industrial Co's current 5-Year Yield-on-Cost % is 3.82, which is 64% below median its own 10-year median of 10.71. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is General Plastic Industrial Co stock overvalued right now?
Based on GuruFocus' analysis, General Plastic Industrial Co (TPE:6128) is currently considered Possible Value Trap. The stock's GF Value™ is NT$32.65, compared to a current price of NT$20.20 — trading 38.1% below its estimated fair value. The current 5-Year Yield-on-Cost % is 3.82, which is 64% below median its 10-year median of 10.71 and 96.9% above the Industrial Products industry median of 1.94. General Plastic Industrial Co's overall GF Score™ is 72/100 with 7 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is 5-Year Yield-on-Cost % calculated?
5-Year Yield-on-Cost % is calculated from a company's financial statements. For General Plastic Industrial Co (TPE:6128), the current 5-Year Yield-on-Cost % is 3.82 as of Aug. 05, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is General Plastic Industrial Co (TPE:6128) Overvalued in 2026?
Based on GuruFocus' analysis, General Plastic Industrial Co stock appears to be undervalued.
The current stock price of NT$20.20 is trading 38.1% below its estimated GF Value™ of NT$32.65.
GuruFocus considers General Plastic Industrial Co to be Possible Value Trap.
Key valuation signals for TPE:6128:
5-Year Yield-on-Cost %: 3.82 (64% below median its 10-year median of 10.71)
GF Value™: NT$32.65 vs. price of NT$20.20 (38.1% below fair value)
Industry Position: 96.9% above the Industrial Products median (#576 of 1916)
No single metric tells the full story. See the TPE:6128 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
General Plastic Industrial Co Ltd is a Taiwan-based company mainly engaged in manufacturing and selling toner cartridges of photocopiers, laser printers, OPC drum gears, and other related businesses. The company's operating segments include: the Office Imaging Equipment Supplies segment, which derives key revenue, and the Other Operations segment. Geographically, the company generates a majority of its revenue from the United States and the rest from the Netherlands, Italy, Mexico, France, and other countries.
72GF Score
Get the complete analysis for TPE:6128
5-Year Yield-on-Cost % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TPE:6128 has been successfully added to your 
