Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
BOM:539046's PB Ratio is ranked worse than 71.4% of 2990
companies
in the Industrial Products industry
Industry Median: 2.18
vs BOM:539046: 3.82
During the past 12 months, Manaksia Coated Metals & Industries's average Book Value Per Share Growth Rate was 15.60% per year.
During the past 3 years, the average Book Value Per Share Growth Rate was 21.90% per year.
During the past 5 years, the average Book Value Per Share Growth Rate was 17.40% per year.
During the past 10 years, the average Book Value Per Share Growth Rate was 9.20% per year.
During the past 13 years, the highest 3-Year average Book Value Per Share Growth Rate of Manaksia Coated Metals & Industries was 21.90% per year. The lowest was -0.30% per year. And the median was 5.35% per year.
The PB Ratio works the best for the businesses that earn most of their profit from their assets, e.g. banks and insurance companies.
Be Aware
Some businesses have very light assets, such as software companies or insurance agencies. The PB Ratio does not work well for these companies. Some companies even have negative equity, so the PB Ratio cannot be applied to them.
Manaksia Coated Metals & Industries PB Ratio Related Terms
Manaksia Coated Metals & Industries PB Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Manaksia Coated Metals & Industries PB Ratio Chart
For the Metal Fabrication subindustry, Manaksia Coated Metals & Industries's PB Ratio, along with its competitors' market caps and PB Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Manaksia Coated Metals & Industries PB Ratio vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Manaksia Coated Metals & Industries's PB Ratio distribution charts can be found below:
* The bar in red indicates where Manaksia Coated Metals & Industries's PB Ratio falls into.
Manaksia Coated Metals & Industries PB Ratio Calculation
The PB Ratio, or Price-to-Book ratio, or Price/Book, is a financial ratio used to compare a company's market price to its Book Value per Share. It is a ratio widely used to value stocks.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
It can also be calculated from the numbers for the whole company:
A closely related ratio is called Price-to-Tangible-Book. The difference between Price-to-Tangible-Book and PB Ratio is that book value other than intangibles are used in the calculation.
Manaksia Coated Metals & Industries (BOM:539046) has a PB Ratio of 3.82 as of Aug. 23, 2026. Price-to-Book ratio is the ratio of share price to a company's book value per share. View historical data on Manaksia Coated Metals & Industries and its competitors. This is 267% above median its historical median of 1.04. Over the past decade, Manaksia Coated Metals & Industries' PB Ratio has ranged from 0.21 to 5.47. According to the industry distribution chart, Manaksia Coated Metals & Industries ranks #2135 out of 2990 companies in the Industrial Products industry, placing it in the top 71.4%.
Is Manaksia Coated Metals & Industries' PB Ratio too high?
Manaksia Coated Metals & Industries' current PB Ratio of 3.82 is 267% above median its 10-year median of 1.04. Over the past 10 years, this metric has ranged from a low of 0.21 to a high of 5.47. The Industrial Products industry median PB Ratio is 2.18. Manaksia Coated Metals & Industries' value of 3.82 is 75.2% above this industry median. Based on the distribution chart, Manaksia Coated Metals & Industries ranks #2135 out of 2990 companies in the Industrial Products industry, which is below the industry midpoint. Overall, Manaksia Coated Metals & Industries has a GF Score™ of 68/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Manaksia Coated Metals & Industries' PB Ratio compare to CRS and ATI?
According to the Industrial Products industry distribution chart, Manaksia Coated Metals & Industries ranks #2135 out of 2990 companies for PB Ratio. This places Manaksia Coated Metals & Industries in the lower half of its industry. The industry median PB Ratio is 2.18. Manaksia Coated Metals & Industries' value of 3.82 is 75.2% above this benchmark. Historically, Manaksia Coated Metals & Industries' own PB Ratio has ranged from 0.21 to 5.47 over the past decade. While the company's 10-year median is 1.04 vs. the industry median of 2.18, Manaksia Coated Metals & Industries has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PB Ratio for an Industrial Products company?
The median PB Ratio among Industrial Products companies is 2.18, based on 2,990 companies in the industry. Companies in the top quartile (top 25%) have a PB Ratio significantly above this median, while those in the bottom quartile fall well below. However, PB Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Manaksia Coated Metals & Industries's current PB Ratio of 3.82 is 75.2% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PB Ratio mean?
A high PB Ratio can signal that a stock is expensive relative to its fundamentals. Price-to-Book ratio is the ratio of share price to a company's book value per share. View historical data on Manaksia Coated Metals & Industries and its competitors. For the Industrial Products industry, the median PB Ratio is 2.18 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Manaksia Coated Metals & Industries's current PB Ratio is 3.82, which is 267% above median its own 10-year median of 1.04. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Manaksia Coated Metals & Industries stock overvalued right now?
Based on GuruFocus' analysis, Manaksia Coated Metals & Industries (BOM:539046) is currently considered Significantly Overvalued. The stock's GF Value™ is ₹81.12, compared to a current price of ₹125.80 — trading 55.1% above its estimated fair value. The current PB Ratio is 3.82, which is 267% above median its 10-year median of 1.04 and 75.2% above the Industrial Products industry median of 2.18. Manaksia Coated Metals & Industries' overall GF Score™ is 68/100 with 4 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PB Ratio calculated?
PB Ratio is calculated from a company's financial statements. For Manaksia Coated Metals & Industries (BOM:539046), the current PB Ratio is 3.82 as of Aug. 23, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Manaksia Coated Metals & Industries (BOM:539046) Overvalued in 2026?
Based on GuruFocus' analysis, Manaksia Coated Metals & Industries stock appears to be overvalued.
The current stock price of ₹125.80 is trading 55.1% above its estimated GF Value™ of ₹81.12.
GuruFocus considers Manaksia Coated Metals & Industries to be Significantly Overvalued.
Key valuation signals for BOM:539046:
PB Ratio: 3.82 (267% above median its 10-year median of 1.04)
GF Value™: ₹81.12 vs. price of ₹125.80 (55.1% above fair value)
Industry Position: 75.2% above the Industrial Products median (#2135 of 2990)
No single metric tells the full story. See the BOM:539046 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Manaksia Coated Metals & Industries Ltd is engaged in the manufacturing of Mosquito Repellent Coils and value-added secondary metal products like Galvanised Corrugated Sheets, Galvanised Plain Sheets, Colour-Coated (Pre-painted) Sheets. It operates in two segments including Metal Products; and others. The metal products segment, which is the key revenue driver, includes colour-coated (pre-painted) steel and aluminum sheets and coils. Geographically, it has operations in India as well as overseas. The company's products are Colour Coated Metal Sheets & Coils, Galvanised Steel Sheets & Coils, Mosquito Repellent Coils, Ultramarine Blue Powder, and Agro Products. The company sells products under brands such as Zingalvo, Singham, and Brochures.
68GF Score
Get the complete analysis for BOM:539046
PB Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
BOM:539046 has been successfully added to your 
