CAS:SMI'
s PB Ratio Range Over the Past 10 Years
Min: 1.57 Med: 2.36 Max: 10.51
Current: 5.9
During the past 13 years, SMI - Ste Metallurgique d'Imiter's highest PB Ratio was 10.51. The lowest was 1.57. And the median was 2.36.
CAS:SMI's PB Ratio is ranked worse than 80.32% of 2358
companies
in the Metals & Mining industry
Industry Median: 2.25
vs CAS:SMI: 5.90
During the past 12 months, SMI - Ste Metallurgique d'Imiter's average Book Value Per Share Growth Rate was 19.00% per year.
During the past 3 years, the average Book Value Per Share Growth Rate was 12.30% per year.
During the past 5 years, the average Book Value Per Share Growth Rate was 6.00% per year.
During the past 13 years, the highest 3-Year average Book Value Per Share Growth Rate of SMI - Ste Metallurgique d'Imiter was 12.30% per year. The lowest was -3.20% per year. And the median was 1.30% per year.
Back to Basics: PB Ratio
SMI - Ste Metallurgique d'Imiter (CAS:SMI) PB Ratio Explanation
The PB Ratio works the best for the businesses that earn most of their profit from their assets, e.g. banks and insurance companies.
Be Aware
Some businesses have very light assets, such as software companies or insurance agencies. The PB Ratio does not work well for these companies. Some companies even have negative equity, so the PB Ratio cannot be applied to them.
SMI - Ste Metallurgique d'Imiter PB Ratio Related Terms
SMI - Ste Metallurgique d'Imiter PB Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
SMI - Ste Metallurgique d'Imiter PB Ratio Competitor Comparison
For the Other Industrial Metals & Mining subindustry, SMI - Ste Metallurgique d'Imiter's PB Ratio, along with its competitors' market caps and PB Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
SMI - Ste Metallurgique d'Imiter PB Ratio vs Metals & Mining Industry
For the Metals & Mining industry and Basic Materials sector, SMI - Ste Metallurgique d'Imiter's PB Ratio distribution charts can be found below:
* The bar in red indicates where SMI - Ste Metallurgique d'Imiter's PB Ratio falls into.
SMI - Ste Metallurgique d'Imiter PB Ratio Calculation
The PB Ratio, or Price-to-Book ratio, or Price/Book, is a financial ratio used to compare a company's market price to its Book Value per Share. It is a ratio widely used to value stocks.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
It can also be calculated from the numbers for the whole company:
A closely related ratio is called Price-to-Tangible-Book. The difference between Price-to-Tangible-Book and PB Ratio is that book value other than intangibles are used in the calculation.
SMI - Ste Metallurgique d'Imiter (CAS:SMI) has a PB Ratio of 5.90 as of Jun. 27, 2026. Price-to-Book ratio is the ratio of share price to a company's book value per share. View historical data on SMI - Ste Metallurgique d'Imiter and its competitors. This is 150% above median its historical median of 2.36. Over the past decade, SMI - Ste Metallurgique d'Imiter's PB Ratio has ranged from 1.57 to 10.51. According to the industry distribution chart, SMI - Ste Metallurgique d'Imiter ranks #1894 out of 2358 companies in the Metals & Mining industry, placing it in the top 80.3%.
Is SMI - Ste Metallurgique d'Imiter's PB Ratio too high?
SMI - Ste Metallurgique d'Imiter's current PB Ratio of 5.90 is 150% above median its 10-year median of 2.36. Over the past 10 years, this metric has ranged from a low of 1.57 to a high of 10.51. The Metals & Mining industry median PB Ratio is 2.25. SMI - Ste Metallurgique d'Imiter's value of 5.90 is 162.2% above this industry median. Based on the distribution chart, SMI - Ste Metallurgique d'Imiter ranks #1894 out of 2358 companies in the Metals & Mining industry, which is in the bottom quartile relative to peers. Overall, SMI - Ste Metallurgique d'Imiter has a GF Score™ of 73/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does SMI - Ste Metallurgique d'Imiter's PB Ratio compare to competitors?
According to the Metals & Mining industry distribution chart, SMI - Ste Metallurgique d'Imiter ranks #1894 out of 2358 companies for PB Ratio. This places SMI - Ste Metallurgique d'Imiter in the lower half of its industry. The industry median PB Ratio is 2.25. SMI - Ste Metallurgique d'Imiter's value of 5.90 is 162.2% above this benchmark. Historically, SMI - Ste Metallurgique d'Imiter's own PB Ratio has ranged from 1.57 to 10.51 over the past decade. While the company's 10-year median is 2.36 vs. the industry median of 2.25, SMI - Ste Metallurgique d'Imiter has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PB Ratio for a Metals & Mining company?
The median PB Ratio among Metals & Mining companies is 2.25, based on 2,358 companies in the industry. Companies in the top quartile (top 25%) have a PB Ratio significantly above this median, while those in the bottom quartile fall well below. However, PB Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. SMI - Ste Metallurgique d'Imiter's current PB Ratio of 5.90 is 162.2% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PB Ratio mean?
A high PB Ratio can signal that a stock is expensive relative to its fundamentals. Price-to-Book ratio is the ratio of share price to a company's book value per share. View historical data on SMI - Ste Metallurgique d'Imiter and its competitors. For the Metals & Mining industry, the median PB Ratio is 2.25 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. SMI - Ste Metallurgique d'Imiter's current PB Ratio is 5.90, which is 150% above median its own 10-year median of 2.36. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is SMI - Ste Metallurgique d'Imiter stock overvalued right now?
Based on GuruFocus' analysis, SMI - Ste Metallurgique d'Imiter (CAS:SMI) is currently considered Significantly Overvalued. The stock's GF Value™ is MAD3,417.45, compared to a current price of MAD5,950.00 — trading 74.1% above its estimated fair value. The current PB Ratio is 5.90, which is 150% above median its 10-year median of 2.36 and 162.2% above the Metals & Mining industry median of 2.25. SMI - Ste Metallurgique d'Imiter's overall GF Score™ is 73/100 with 2 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PB Ratio calculated?
PB Ratio is calculated from a company's financial statements. For SMI - Ste Metallurgique d'Imiter (CAS:SMI), the current PB Ratio is 5.90 as of Jun. 27, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is SMI - Ste Metallurgique d'Imiter (CAS:SMI) Overvalued in 2026?
Based on GuruFocus' analysis, SMI - Ste Metallurgique d'Imiter stock appears to be overvalued.
The current stock price of MAD5,950.00 is trading 74.1% above its estimated GF Value™ of MAD3,417.45.
GuruFocus considers SMI - Ste Metallurgique d'Imiter to be Significantly Overvalued.
Key valuation signals for CAS:SMI:
PB Ratio: 5.90 (150% above median its 10-year median of 2.36)
GF Value™: MAD3,417.45 vs. price of MAD5,950.00 (74.1% above fair value)
Industry Position: 162.2% above the Metals & Mining median (#1894 of 2358)
No single metric tells the full story. See the CAS:SMI stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
SMI - Ste Metallurgique d'Imiter Business Description
SMI - Ste Metallurgique d'Imiter is a Morocco-based company engaged in the mining industry. The company's product portfolio consists of precious metals such as Silver and Gold, Copper, Zinc, Cobalt cathode, Arsenic, Nickel and many more. Its Morocco project consists of Bouskour and Tizert. The Bouskour project is located approximately 80 kilometers southeast of the city of Ouarzazate. Its Tizert project is situated approximately 80 kilometers east of the city of Agadir in the province of Taroudant. The company's Africa project comprises of Gold projects, Tri-K projects, Pumpi project, and Assosa and Budur projects.
73GF Score
Get the complete analysis for CAS:SMI
PB Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
CAS:SMI has been successfully added to your 
