Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
The historical rank and industry rank for SMI - Ste Metallurgique d'Imiter's Shiller PE Ratio or its related term are showing as below:
CAS:SMI'
s Shiller PE Ratio Range Over the Past 10 Years
Min: 26.19 Med: 46.65 Max: 102.66
Current: 63.76
During the past 13 years, SMI - Ste Metallurgique d'Imiter's highest Shiller PE Ratio was 102.66. The lowest was 26.19. And the median was 46.65.
CAS:SMI's Shiller PE Ratio is ranked worse than 79.9% of 413
companies
in the Metals & Mining industry
Industry Median: 30.91
vs CAS:SMI: 63.76
E10 is a concept invented by Prof. Robert Shiller, who uses E10 for his Shiller PE Ratio calculation. E10 is the average of the inflation adjusted earnings of a company over the past 10 years.
SMI - Ste Metallurgique d'Imiter's adjusted earnings per share data of for the fiscal year that ended in Dec25 was MAD241.390. Add all the adjusted EPS for the past 10 years together and divide 10 will get our E10, which is MAD103.37 for the trailing ten years ended in Dec25.
Shiller PE for Stocks: The True Measure of Stock Valuation
SMI - Ste Metallurgique d'Imiter (CAS:SMI) Shiller PE Ratio Explanation
Compared with the regular PE Ratio, which works poorly for cyclical businesses, the Shiller PE Ratio smoothed out the fluctuations of profit margins during business cycles. Therefore it is more accurate in reflecting the valuation of the company.
If a company has consistent business performance, the Shiller PE Ratio should give similar results to regular PE Ratio.
Compared with the PS Ratio, the Shiller PE Ratio makes the comparison between different industries more meaningful.
Be Aware
Shiller PE Ratio assumes that over the long term, businesses and profitability revert to their means. If a company's business model does not work in the future compared with the past, Shiller PE Ratio and PS Ratio will give false valuations.
SMI - Ste Metallurgique d'Imiter Shiller PE Ratio Related Terms
SMI - Ste Metallurgique d'Imiter Shiller PE Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
SMI - Ste Metallurgique d'Imiter Shiller PE Ratio Chart
SMI - Ste Metallurgique d'Imiter Shiller PE Ratio Competitor Comparison
For the Other Industrial Metals & Mining subindustry, SMI - Ste Metallurgique d'Imiter's Shiller PE Ratio, along with its competitors' market caps and Shiller PE Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
SMI - Ste Metallurgique d'Imiter Shiller PE Ratio vs Metals & Mining Industry
For the Metals & Mining industry and Basic Materials sector, SMI - Ste Metallurgique d'Imiter's Shiller PE Ratio distribution charts can be found below:
* The bar in red indicates where SMI - Ste Metallurgique d'Imiter's Shiller PE Ratio falls into.
SMI - Ste Metallurgique d'Imiter Shiller PE Ratio Calculation
For Shiller PE Ratio, the earnings of the past 10 years are inflation-adjusted and averaged. The result is used for P/E calculation. Since it looks at the average over the last 10 years, the Shiller PE Ratio is also called PE10.
The Shiller PE Ratio was first used by professor Robert Shiller to measure the valuation of the overall market. The same calculation is applied here to individual companies.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Add all the adjusted EPS together and divide 10 will get our E10.
Please note that we use the CPI data of the country/region where the company is headquartered. If the CPI data for that country/region is not available, then we will use the CPI data of the United States as default.
SMI - Ste Metallurgique d'Imiter (CAS:SMI) has a Shiller PE Ratio of 62.40 as of Sep. 15, 2026. Shiller price-earnings ratio is the ratio of share price to a company's inflation-adjusted earnings over a 10-year period. View historical data on SMI - Ste Metallurgique d'Imiter and its competitors. This is 34% above median its historical median of 46.65. Over the past decade, SMI - Ste Metallurgique d'Imiter's Shiller PE Ratio has ranged from 26.19 to 102.66. According to the industry distribution chart, SMI - Ste Metallurgique d'Imiter ranks #330 out of 413 companies in the Metals & Mining industry, placing it in the top 79.9%.
Is SMI - Ste Metallurgique d'Imiter's Shiller PE Ratio too high?
SMI - Ste Metallurgique d'Imiter's current Shiller PE Ratio of 62.40 is 34% above median its 10-year median of 46.65. Over the past 10 years, this metric has ranged from a low of 26.19 to a high of 102.66. The Metals & Mining industry median Shiller PE Ratio is 30.91. SMI - Ste Metallurgique d'Imiter's value of 62.40 is 101.9% above this industry median. Based on the distribution chart, SMI - Ste Metallurgique d'Imiter ranks #330 out of 413 companies in the Metals & Mining industry, which is in the bottom quartile relative to peers. Overall, SMI - Ste Metallurgique d'Imiter has a GF Score™ of 70/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does SMI - Ste Metallurgique d'Imiter's Shiller PE Ratio compare to competitors?
According to the Metals & Mining industry distribution chart, SMI - Ste Metallurgique d'Imiter ranks #330 out of 413 companies for Shiller PE Ratio. This places SMI - Ste Metallurgique d'Imiter in the lower half of its industry. The industry median Shiller PE Ratio is 30.91. SMI - Ste Metallurgique d'Imiter's value of 62.40 is 101.9% above this benchmark. Historically, SMI - Ste Metallurgique d'Imiter's own Shiller PE Ratio has ranged from 26.19 to 102.66 over the past decade. While the company's 10-year median is 46.65 vs. the industry median of 30.91, SMI - Ste Metallurgique d'Imiter has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Shiller PE Ratio for a Metals & Mining company?
The median Shiller PE Ratio among Metals & Mining companies is 30.91, based on 413 companies in the industry. Companies in the top quartile (top 25%) have a Shiller PE Ratio significantly above this median, while those in the bottom quartile fall well below. However, Shiller PE Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. SMI - Ste Metallurgique d'Imiter's current Shiller PE Ratio of 62.40 is 101.9% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Shiller PE Ratio mean?
A high Shiller PE Ratio can signal that a stock is expensive relative to its fundamentals. Shiller price-earnings ratio is the ratio of share price to a company's inflation-adjusted earnings over a 10-year period. View historical data on SMI - Ste Metallurgique d'Imiter and its competitors. For the Metals & Mining industry, the median Shiller PE Ratio is 30.91 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. SMI - Ste Metallurgique d'Imiter's current Shiller PE Ratio is 62.40, which is 34% above median its own 10-year median of 46.65. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is SMI - Ste Metallurgique d'Imiter stock overvalued right now?
Based on GuruFocus' analysis, SMI - Ste Metallurgique d'Imiter (CAS:SMI) is currently considered Significantly Overvalued. The stock's GF Value™ is MAD3,555.72, compared to a current price of MAD6,450.00 — trading 81.4% above its estimated fair value. The current Shiller PE Ratio is 62.40, which is 34% above median its 10-year median of 46.65 and 101.9% above the Metals & Mining industry median of 30.91. SMI - Ste Metallurgique d'Imiter's overall GF Score™ is 70/100 with 2 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Shiller PE Ratio calculated?
Shiller PE Ratio is calculated from a company's financial statements. For SMI - Ste Metallurgique d'Imiter (CAS:SMI), the current Shiller PE Ratio is 62.40 as of Sep. 15, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is SMI - Ste Metallurgique d'Imiter (CAS:SMI) Overvalued in 2026?
Based on GuruFocus' analysis, SMI - Ste Metallurgique d'Imiter stock appears to be overvalued.
The current stock price of MAD6,450.00 is trading 81.4% above its estimated GF Value™ of MAD3,555.72.
GuruFocus considers SMI - Ste Metallurgique d'Imiter to be Significantly Overvalued.
Key valuation signals for CAS:SMI:
Shiller PE Ratio: 62.40 (34% above median its 10-year median of 46.65)
GF Value™: MAD3,555.72 vs. price of MAD6,450.00 (81.4% above fair value)
Industry Position: 101.9% above the Metals & Mining median (#330 of 413)
No single metric tells the full story. See the CAS:SMI stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
SMI - Ste Metallurgique d'Imiter is a Morocco-based company engaged in the mining industry. The company's product portfolio consists of precious metals such as Silver and Gold, Copper, Zinc, Cobalt cathode, Arsenic, Nickel and many more. Its Morocco project consists of Bouskour and Tizert. The Bouskour project is located approximately 80 kilometers southeast of the city of Ouarzazate. Its Tizert project is situated approximately 80 kilometers east of the city of Agadir in the province of Taroudant. The company's Africa project comprises of Gold projects, Tri-K projects, Pumpi project, and Assosa and Budur projects.
70GF Score
Get the complete analysis for CAS:SMI
Shiller PE Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
CAS:SMI has been successfully added to your 
