Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
The historical rank and industry rank for Sazgar Engineering Works's PB Ratio or its related term are showing as below:
KAR:SAZEW'
s PB Ratio Range Over the Past 10 Years
Min: 1.05 Med: 4.09 Max: 7.99
Current: 3.4
During the past 9 years, Sazgar Engineering Works's highest PB Ratio was 7.99. The lowest was 1.05. And the median was 4.09.
KAR:SAZEW's PB Ratio is ranked worse than 80.83% of 1294
companies
in the Vehicles & Parts industry
Industry Median: 1.375
vs KAR:SAZEW: 3.40
During the past 12 months, Sazgar Engineering Works's average Book Value Per Share Growth Rate was 69.20% per year.
During the past 3 years, the average Book Value Per Share Growth Rate was 129.80% per year.
During the past 5 years, the average Book Value Per Share Growth Rate was 69.60% per year.
During the past 9 years, the highest 3-Year average Book Value Per Share Growth Rate of Sazgar Engineering Works was 129.80% per year. The lowest was 18.10% per year. And the median was 22.85% per year.
Back to Basics: PB Ratio
Sazgar Engineering Works (KAR:SAZEW) PB Ratio Explanation
The PB Ratio works the best for the businesses that earn most of their profit from their assets, e.g. banks and insurance companies.
Be Aware
Some businesses have very light assets, such as software companies or insurance agencies. The PB Ratio does not work well for these companies. Some companies even have negative equity, so the PB Ratio cannot be applied to them.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Auto Manufacturers subindustry, Sazgar Engineering Works's PB Ratio, along with its competitors' market caps and PB Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Sazgar Engineering Works PB Ratio vs Vehicles & Parts Industry
For the Vehicles & Parts industry and Consumer Cyclical sector, Sazgar Engineering Works's PB Ratio distribution charts can be found below:
* The bar in red indicates where Sazgar Engineering Works's PB Ratio falls into.
The PB Ratio, or Price-to-Book ratio, or Price/Book, is a financial ratio used to compare a company's market price to its Book Value per Share. It is a ratio widely used to value stocks.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
It can also be calculated from the numbers for the whole company:
A closely related ratio is called Price-to-Tangible-Book. The difference between Price-to-Tangible-Book and PB Ratio is that book value other than intangibles are used in the calculation.
Sazgar Engineering Works (KAR:SAZEW) has a PB Ratio of 3.40 as of Jul. 15, 2026. Price-to-Book ratio is the ratio of share price to a company's book value per share. View historical data on Sazgar Engineering Works and its competitors. This is 17% below median its historical median of 4.09. Over the past decade, Sazgar Engineering Works' PB Ratio has ranged from 1.05 to 7.99. According to the industry distribution chart, Sazgar Engineering Works ranks #1046 out of 1294 companies in the Vehicles & Parts industry, placing it in the top 80.8%.
Is Sazgar Engineering Works' PB Ratio too high?
Sazgar Engineering Works' current PB Ratio of 3.40 is 17% below median its 10-year median of 4.09. Over the past 10 years, this metric has ranged from a low of 1.05 to a high of 7.99. The Vehicles & Parts industry median PB Ratio is 1.38. Sazgar Engineering Works' value of 3.40 is 147.3% above this industry median. Based on the distribution chart, Sazgar Engineering Works ranks #1046 out of 1294 companies in the Vehicles & Parts industry, which is in the bottom quartile relative to peers. Overall, Sazgar Engineering Works has a GF Score™ of 99/100 and is considered Fairly Valued, reflecting its overall financial health beyond just this single metric.
How does Sazgar Engineering Works' PB Ratio compare to TSLA and GM?
According to the Vehicles & Parts industry distribution chart, Sazgar Engineering Works ranks #1046 out of 1294 companies for PB Ratio. This places Sazgar Engineering Works in the lower half of its industry. The industry median PB Ratio is 1.38. Sazgar Engineering Works' value of 3.40 is 147.3% above this benchmark. Historically, Sazgar Engineering Works' own PB Ratio has ranged from 1.05 to 7.99 over the past decade. While the company's 10-year median is 4.09 vs. the industry median of 1.38, Sazgar Engineering Works has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PB Ratio for a Vehicles & Parts company?
The median PB Ratio among Vehicles & Parts companies is 1.38, based on 1,294 companies in the industry. Companies in the top quartile (top 25%) have a PB Ratio significantly above this median, while those in the bottom quartile fall well below. However, PB Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Sazgar Engineering Works's current PB Ratio of 3.40 is 147.3% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PB Ratio mean?
A high PB Ratio can signal that a stock is expensive relative to its fundamentals. Price-to-Book ratio is the ratio of share price to a company's book value per share. View historical data on Sazgar Engineering Works and its competitors. For the Vehicles & Parts industry, the median PB Ratio is 1.38 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Sazgar Engineering Works's current PB Ratio is 3.40, which is 17% below median its own 10-year median of 4.09. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Sazgar Engineering Works stock overvalued right now?
Based on GuruFocus' analysis, Sazgar Engineering Works (KAR:SAZEW) is currently considered Fairly Valued. The stock's GF Value™ is ₨2,006.66, compared to a current price of ₨1,998.49 — trading 0.4% below its estimated fair value. The current PB Ratio is 3.40, which is 17% below median its 10-year median of 4.09 and 147.3% above the Vehicles & Parts industry median of 1.38. Sazgar Engineering Works' overall GF Score™ is 99/100 with 1 warning sign to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PB Ratio calculated?
PB Ratio is calculated from a company's financial statements. For Sazgar Engineering Works (KAR:SAZEW), the current PB Ratio is 3.40 as of Jul. 15, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Sazgar Engineering Works (KAR:SAZEW) Overvalued in 2026?
Based on GuruFocus' analysis, Sazgar Engineering Works stock appears to be undervalued.
The current stock price of ₨1,998.49 is trading 0.4% below its estimated GF Value™ of ₨2,006.66.
GuruFocus considers Sazgar Engineering Works to be Fairly Valued.
Key valuation signals for KAR:SAZEW:
PB Ratio: 3.40 (17% below median its 10-year median of 4.09)
GF Value™: ₨2,006.66 vs. price of ₨1,998.49 (0.4% below fair value)
Industry Position: 147.3% above the Vehicles & Parts median (#1046 of 1294)
No single metric tells the full story. See the KAR:SAZEW stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Sazgar Engineering Works Ltd is engaged in manufacturing and selling automobiles, including four-wheelers and three-wheelers, producing tractor wheel rims, and marketing home appliances. It markets four-wheelers under the brands HAVAL, BAIC, GWM TANK-500, and ORA, offering hybrid electric and petrol SUVs, and exports three-wheelers under the brand SAZGAR. Tractor wheel rims are supplied to tractor assemblers, and home appliances are marketed under the Whirlpool brand. The Company's revenue mainly comes from Pakistan, with additional sales in Bangladesh, Japan, and other countries. The four-wheeler segment generates the highest revenue.
99GF Score
Get the complete analysis for KAR:SAZEW
PB Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
KAR:SAZEW has been successfully added to your 
