Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
The historical rank and industry rank for Talbros Automotive Components's PEG Ratio or its related term are showing as below:
BOM:505160'
s PEG Ratio Range Over the Past 10 Years
Min: 0.41 Med: 1.11 Max: 80.9
Current: 1.38
During the past 13 years, Talbros Automotive Components's highest PEG Ratio was 80.90. The lowest was 0.41. And the median was 1.11.
BOM:505160's PEG Ratio is ranked worse than 55.51% of 672
companies
in the Vehicles & Parts industry
Industry Median: 1.155
vs BOM:505160: 1.38
Peter Lynch thinks a company with a P/E ratio equal to its growth rate is fairly valued.
Talbros Automotive Components (BOM:505160) PEG Ratio Explanation
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
Talbros Automotive Components PEG Ratio Related Terms
Talbros Automotive Components PEG Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Auto Parts subindustry, Talbros Automotive Components's PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Talbros Automotive Components PEG Ratio vs Vehicles & Parts Industry
For the Vehicles & Parts industry and Consumer Cyclical sector, Talbros Automotive Components's PEG Ratio distribution charts can be found below:
* The bar in red indicates where Talbros Automotive Components's PEG Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
Talbros Automotive Components (BOM:505160) has a PEG Ratio of 1.41 as of Aug. 06, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Talbros Automotive Components and its competitors. This is 27% above median its historical median of 1.11. Over the past decade, Talbros Automotive Components' PEG Ratio has ranged from 0.41 to 80.90. According to the industry distribution chart, Talbros Automotive Components ranks #373 out of 672 companies in the Vehicles & Parts industry, placing it in the top 55.5%.
Is Talbros Automotive Components' PEG Ratio too high?
Talbros Automotive Components' current PEG Ratio of 1.41 is 27% above median its 10-year median of 1.11. Over the past 10 years, this metric has ranged from a low of 0.41 to a high of 80.90. The Vehicles & Parts industry median PEG Ratio is 1.16. Talbros Automotive Components' value of 1.41 is 22.1% above this industry median. Based on the distribution chart, Talbros Automotive Components ranks #373 out of 672 companies in the Vehicles & Parts industry, which is below the industry midpoint. Overall, Talbros Automotive Components has a GF Score™ of 73/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Talbros Automotive Components' PEG Ratio compare to ORLY and AZO?
According to the Vehicles & Parts industry distribution chart, Talbros Automotive Components ranks #373 out of 672 companies for PEG Ratio. This places Talbros Automotive Components in the lower half of its industry. The industry median PEG Ratio is 1.16. Talbros Automotive Components' value of 1.41 is 22.1% above this benchmark. Historically, Talbros Automotive Components' own PEG Ratio has ranged from 0.41 to 80.90 over the past decade. While the company's 10-year median is 1.11 vs. the industry median of 1.16, Talbros Automotive Components has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for a Vehicles & Parts company?
The median PEG Ratio among Vehicles & Parts companies is 1.16, based on 672 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Talbros Automotive Components's current PEG Ratio of 1.41 is 22.1% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Talbros Automotive Components and its competitors. For the Vehicles & Parts industry, the median PEG Ratio is 1.16 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Talbros Automotive Components's current PEG Ratio is 1.41, which is 27% above median its own 10-year median of 1.11. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Talbros Automotive Components stock overvalued right now?
Based on GuruFocus' analysis, Talbros Automotive Components (BOM:505160) is currently considered Significantly Overvalued. The stock's GF Value™ is ₹320.89, compared to a current price of ₹438.70 — trading 36.7% above its estimated fair value. The current PEG Ratio is 1.41, which is 27% above median its 10-year median of 1.11 and 22.1% above the Vehicles & Parts industry median of 1.16. Talbros Automotive Components' overall GF Score™ is 73/100 with 7 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For Talbros Automotive Components (BOM:505160), the current PEG Ratio is 1.41 as of Aug. 06, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Talbros Automotive Components (BOM:505160) Overvalued in 2026?
Based on GuruFocus' analysis, Talbros Automotive Components stock appears to be overvalued.
The current stock price of ₹438.70 is trading 36.7% above its estimated GF Value™ of ₹320.89.
GuruFocus considers Talbros Automotive Components to be Significantly Overvalued.
Key valuation signals for BOM:505160:
PEG Ratio: 1.41 (27% above median its 10-year median of 1.11)
GF Value™: ₹320.89 vs. price of ₹438.70 (36.7% above fair value)
Industry Position: 22.1% above the Vehicles & Parts median (#373 of 672)
No single metric tells the full story. See the BOM:505160 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Talbros Automotive Components Ltd is an Indian-based company operating in the auto industry which includes manufacturing of Auto components. It designs, develops, and manufactures complete sealing, Heat Shield, and NVH Solutions. Its products include Gaskets and heat shields, Forgings, Suspension systems, Anti-vibration products and hoses. The group generates revenue from India and other countries out of which prime revenue is generated from India.
73GF Score
Get the complete analysis for BOM:505160
PEG Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
BOM:505160 has been successfully added to your 
