Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
BOM:507785'
s PEG Ratio Range Over the Past 10 Years
Min: 0.15 Med: 2.91 Max: 9.76
Current: 0.16
During the past 13 years, Tainwala Chemical and Plastic (I)'s highest PEG Ratio was 9.76. The lowest was 0.15. And the median was 2.91.
BOM:507785's PEG Ratio is ranked better than 97.72% of 613
companies
in the Chemicals industry
Industry Median: 2.14
vs BOM:507785: 0.16
Peter Lynch thinks a company with a P/E ratio equal to its growth rate is fairly valued.
Tainwala Chemical and Plastic (I) (BOM:507785) PEG Ratio Explanation
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
Tainwala Chemical and Plastic (I) PEG Ratio Related Terms
Tainwala Chemical and Plastic (I) PEG Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Specialty Chemicals subindustry, Tainwala Chemical and Plastic (I)'s PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Tainwala Chemical and Plastic (I) PEG Ratio vs Chemicals Industry
For the Chemicals industry and Basic Materials sector, Tainwala Chemical and Plastic (I)'s PEG Ratio distribution charts can be found below:
* The bar in red indicates where Tainwala Chemical and Plastic (I)'s PEG Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
Tainwala Chemical and Plastic (I) (BOM:507785) has a PEG Ratio of 0.16 as of Jul. 24, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Tainwala Chemical and Plastic (I) and its competitors. This is 95% below median its historical median of 2.91. Over the past decade, Tainwala Chemical and Plastic (I)'s PEG Ratio has ranged from 0.15 to 9.76. According to the industry distribution chart, Tainwala Chemical and Plastic (I) ranks #14 out of 613 companies in the Chemicals industry, placing it in the top 2.3%.
Is Tainwala Chemical and Plastic (I)'s PEG Ratio too high?
Tainwala Chemical and Plastic (I)'s current PEG Ratio of 0.16 is 95% below median its 10-year median of 2.91. Over the past 10 years, this metric has ranged from a low of 0.15 to a high of 9.76. The Chemicals industry median PEG Ratio is 2.14. Tainwala Chemical and Plastic (I)'s value of 0.16 is 92.5% below this industry median. Based on the distribution chart, Tainwala Chemical and Plastic (I) ranks #14 out of 613 companies in the Chemicals industry, which is in the top quartile — a strong position relative to peers. Overall, Tainwala Chemical and Plastic (I) has a GF Score™ of 71/100 and is considered Fairly Valued, reflecting its overall financial health beyond just this single metric.
How does Tainwala Chemical and Plastic (I)'s PEG Ratio compare to LIN and SHW?
According to the Chemicals industry distribution chart, Tainwala Chemical and Plastic (I) ranks #14 out of 613 companies for PEG Ratio. This places Tainwala Chemical and Plastic (I) in the top 2% of its industry — outperforming the majority of peers. The industry median PEG Ratio is 2.14. Tainwala Chemical and Plastic (I)'s value of 0.16 is 92.5% below this benchmark. Historically, Tainwala Chemical and Plastic (I)'s own PEG Ratio has ranged from 0.15 to 9.76 over the past decade. While the company's 10-year median is 2.91 vs. the industry median of 2.14, Tainwala Chemical and Plastic (I) has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for a Chemicals company?
The median PEG Ratio among Chemicals companies is 2.14, based on 613 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Tainwala Chemical and Plastic (I)'s current PEG Ratio of 0.16 is 92.5% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Tainwala Chemical and Plastic (I) and its competitors. For the Chemicals industry, the median PEG Ratio is 2.14 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Tainwala Chemical and Plastic (I)'s current PEG Ratio is 0.16, which is 95% below median its own 10-year median of 2.91. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Tainwala Chemical and Plastic (I) stock overvalued right now?
Based on GuruFocus' analysis, Tainwala Chemical and Plastic (I) (BOM:507785) is currently considered Fairly Valued. The stock's GF Value™ is ₹206.55, compared to a current price of ₹210.00 — trading 1.7% above its estimated fair value. The current PEG Ratio is 0.16, which is 95% below median its 10-year median of 2.91 and 92.5% below the Chemicals industry median of 2.14. Tainwala Chemical and Plastic (I)'s overall GF Score™ is 71/100 with 5 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For Tainwala Chemical and Plastic (I) (BOM:507785), the current PEG Ratio is 0.16 as of Jul. 24, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Tainwala Chemical and Plastic (I) (BOM:507785) Overvalued in 2026?
Based on GuruFocus' analysis, Tainwala Chemical and Plastic (I) stock appears to be overvalued.
The current stock price of ₹210.00 is trading 1.7% above its estimated GF Value™ of ₹206.55.
GuruFocus considers Tainwala Chemical and Plastic (I) to be Fairly Valued.
Key valuation signals for BOM:507785:
PEG Ratio: 0.16 (95% below median its 10-year median of 2.91)
GF Value™: ₹206.55 vs. price of ₹210.00 (1.7% above fair value)
Industry Position: 92.5% below the Chemicals median (#14 of 613)
No single metric tells the full story. See the BOM:507785 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Tainwala Chemical and Plastic (I) Business Description
Tainwala Chemical and Plastic (I) Ltd is engaged in the business of manufacturing extruded plastic sheets of various polymers like polyvinyl chloride (PVC), polypropylene (PP), PP glass laminated (PPGL), high-density polyethylene (HDPE), and acrylonitrile-butadiene-styrene (ABS). Its other products include Tainclear-PVC Rigid Sheets, Tainflex-PVC Flexible Sheets, Tain PP-Polypropylene Sheets, Tainpack-PVC Foils, and other products. The company operates through two segments: Plastic Sheets and Tradable items.
71GF Score
Get the complete analysis for BOM:507785
PEG Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
BOM:507785 has been successfully added to your 
