During the past 13 years, the highest Dividend Payout Ratio of Tainwala Chemical and Plastic (I) was 0.26. The lowest was 0.26. And the median was 0.26.
The growth rate is calculated with least square regression.
For more information regarding to dividend, please check our Dividend Page.
* Please note that "special dividend" is not included in the calculation of dividend per share and related fields.
Tainwala Chemical and Plastic (I) (BOM:507785) Dividend Yield % Explanation
Over the long term, the return from dividends has been a significant contributor to the total returns produced by equity securities. Studies by Elroy Dimson, Paul Marsh, and Mike Staunton of Princeton University (2002) found that a market-oriented portfolio, which included reinvested dividends, would have generated nearly 85 times the wealth generated by the same portfolio relying solely on capital gains.
Dividends may also qualify a lower tax rate for investors.
In dividends investing, Payout Ratio and Dividend Growth Rate are the two most important variables for consideration. A lower payout ratio may indicate that the company has more room to increase its dividends.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Tainwala Chemical and Plastic (I) Dividend Yield % Chart
BOM:507785 vs LIN, SHW, ECL: Dividend Yield % Comparison
For the Specialty Chemicals subindustry, Tainwala Chemical and Plastic (I)'s Dividend Yield %, along with its competitors' market caps and Dividend Yield % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Tainwala Chemical and Plastic (I) Dividend Yield % vs Chemicals Industry
For the Chemicals industry and Basic Materials sector, Tainwala Chemical and Plastic (I)'s Dividend Yield % distribution charts can be found below:
* The bar in red indicates where Tainwala Chemical and Plastic (I)'s Dividend Yield % falls into.
Tainwala Chemical and Plastic (I) Dividend Yield % Calculation
Dividend Yield measures how much a company pays out in dividends each year relative to its share price.
Tainwala Chemical and Plastic (I) Recent Full-Year* Dividend History
Amount
Ex-date
Record Date
Pay Date
Type
Frequency
Forex Rate
INR 3.000000
2025-08-11
2025-08-11
2025-08-22
Cash Dividend
annually
INR:INR 1.000000
* GuruFocus has an internal rule that if the most recent dividend payment frequency is at least 4 times a year, then the full year will be calculated according to the frequency of payment or the one-year time frame, whichever is stricter.
* GuruFocus converts dividend currency to local traded share price currency in order to calculate dividend yield. Please refer to the last column "Forex Rate" in the above table.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Tainwala Chemical and Plastic (I) (BOM:507785) has a Dividend Yield % of 1.44% as of Jul. 03, 2026. Dividend yield is the ratio of company dividends to the share price. View historical data on Tainwala Chemical and Plastic (I) and its competitors. This is near median its historical median of 1.53. Over the past decade, Tainwala Chemical and Plastic (I)'s Dividend Yield % has ranged from 1.42 to 1.89. According to the industry distribution chart, Tainwala Chemical and Plastic (I) ranks #544 out of 1069 companies in the Chemicals industry, placing it in the top 50.9%.
Is Tainwala Chemical and Plastic (I)'s Dividend Yield % too high?
Tainwala Chemical and Plastic (I)'s current Dividend Yield % of 1.44% is near median its 10-year median of 1.53. Over the past 10 years, this metric has ranged from a low of 1.42 to a high of 1.89. The Chemicals industry median Dividend Yield % is 1.49. Tainwala Chemical and Plastic (I)'s value of 1.44% is 3.4% below this industry median. Based on the distribution chart, Tainwala Chemical and Plastic (I) ranks #544 out of 1069 companies in the Chemicals industry, which is below the industry midpoint. Overall, Tainwala Chemical and Plastic (I) has a GF Score™ of 71/100 and is considered Fairly Valued, reflecting its overall financial health beyond just this single metric.
How does Tainwala Chemical and Plastic (I)'s Dividend Yield % compare to LIN and SHW?
According to the Chemicals industry distribution chart, Tainwala Chemical and Plastic (I) ranks #544 out of 1069 companies for Dividend Yield %. This places Tainwala Chemical and Plastic (I) in the lower half of its industry. The industry median Dividend Yield % is 1.49. Tainwala Chemical and Plastic (I)'s value of 1.44% is 3.4% below this benchmark. Historically, Tainwala Chemical and Plastic (I)'s own Dividend Yield % has ranged from 1.42 to 1.89 over the past decade. While the company's 10-year median is 1.53 vs. the industry median of 1.49, Tainwala Chemical and Plastic (I) has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Dividend Yield % for a Chemicals company?
The median Dividend Yield % among Chemicals companies is 1.49, based on 1,069 companies in the industry. Companies in the top quartile (top 25%) have a Dividend Yield % significantly above this median, while those in the bottom quartile fall well below. However, Dividend Yield % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Tainwala Chemical and Plastic (I)'s current Dividend Yield % of 1.44% is 3.4% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Dividend Yield % mean?
A high Dividend Yield % can signal that a stock is expensive relative to its fundamentals. Dividend yield is the ratio of company dividends to the share price. View historical data on Tainwala Chemical and Plastic (I) and its competitors. For the Chemicals industry, the median Dividend Yield % is 1.49 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Tainwala Chemical and Plastic (I)'s current Dividend Yield % is 1.44%, which is near median its own 10-year median of 1.53. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Tainwala Chemical and Plastic (I) stock overvalued right now?
Based on GuruFocus' analysis, Tainwala Chemical and Plastic (I) (BOM:507785) is currently considered Fairly Valued. The stock's GF Value™ is ₹205.22, compared to a current price of ₹209.00 — trading 1.8% above its estimated fair value. The current Dividend Yield % is 1.44%, which is near median its 10-year median of 1.53 and 3.4% below the Chemicals industry median of 1.49. Tainwala Chemical and Plastic (I)'s overall GF Score™ is 71/100 with 5 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Dividend Yield % calculated?
Dividend Yield % is calculated from a company's financial statements. For Tainwala Chemical and Plastic (I) (BOM:507785), the current Dividend Yield % is 1.44% as of Jul. 03, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Tainwala Chemical and Plastic (I) (BOM:507785) Overvalued in 2026?
Based on GuruFocus' analysis, Tainwala Chemical and Plastic (I) stock appears to be overvalued.
The current stock price of ₹209.00 is trading 1.8% above its estimated GF Value™ of ₹205.22.
GuruFocus considers Tainwala Chemical and Plastic (I) to be Fairly Valued.
Key valuation signals for BOM:507785:
Dividend Yield %: 1.44% (near median its 10-year median of 1.53)
GF Value™: ₹205.22 vs. price of ₹209.00 (1.8% above fair value)
Industry Position: 3.4% below the Chemicals median (#544 of 1069)
No single metric tells the full story. See the BOM:507785 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Tainwala Chemical and Plastic (I) Business Description
Tainwala Chemical and Plastic (I) Ltd is engaged in the business of manufacturing extruded plastic sheets of various polymers like polyvinyl chloride (PVC), polypropylene (PP), PP glass laminated (PPGL), high-density polyethylene (HDPE), and acrylonitrile-butadiene-styrene (ABS). Its other products include Tainclear-PVC Rigid Sheets, Tainflex-PVC Flexible Sheets, Tain PP-Polypropylene Sheets, Tainpack-PVC Foils, and other products. The company operates through two segments: Plastic Sheets and Tradable items.
71GF Score
Get the complete analysis for BOM:507785
Dividend Yield % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
BOM:507785 has been successfully added to your 
