Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Rajoo EngineersBOM:522257 +4.99%71 PEG Ratio is 0.71 as of Jul. 23, 2026, which is 74% below its 10-year median of 2.73. GuruFocus rates BOM:522257 with a GF Score™ of 71/100 and a GF Value™ of ₹133.41 (Possible Value Trap). The stock has 5 warning signs investors should review. Among 1,277 Industrial Products companies, Rajoo Engineers ranks better than 79.01% on this metric.
* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
The historical rank and industry rank for Rajoo Engineers's PEG Ratio or its related term are showing as below:
BOM:522257'
s PEG Ratio Range Over the Past 10 Years
Min: 0.43 Med: 2.73 Max: 37.32
Current: 0.71
During the past 13 years, Rajoo Engineers's highest PEG Ratio was 37.32. The lowest was 0.43. And the median was 2.73.
BOM:522257's PEG Ratio is ranked better than 79.01% of 1277
companies
in the Industrial Products industry
Industry Median: 1.79
vs BOM:522257: 0.71
Peter Lynch thinks a company with a P/E ratio equal to its growth rate is fairly valued.
Rajoo Engineers (BOM:522257) PEG Ratio Explanation
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
Rajoo Engineers PEG Ratio Related Terms
Rajoo Engineers PEG Ratio Historical Data
* Premium members only.
The historical data trend for Rajoo Engineers's PEG Ratio can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Specialty Industrial Machinery subindustry, Rajoo Engineers's PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Rajoo Engineers PEG Ratio vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Rajoo Engineers's PEG Ratio distribution charts can be found below:
* The bar in red indicates where Rajoo Engineers's PEG Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
Rajoo Engineers (BOM:522257) has a PEG Ratio of 0.71 as of Jul. 23, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Rajoo Engineers and its competitors. This is 74% below median its historical median of 2.73. Over the past decade, Rajoo Engineers' PEG Ratio has ranged from 0.43 to 37.32. According to the industry distribution chart, Rajoo Engineers ranks #268 out of 1277 companies in the Industrial Products industry, placing it in the top 21%.
Is Rajoo Engineers' PEG Ratio too high?
Rajoo Engineers' current PEG Ratio of 0.71 is 74% below median its 10-year median of 2.73. Over the past 10 years, this metric has ranged from a low of 0.43 to a high of 37.32. The Industrial Products industry median PEG Ratio is 1.79. Rajoo Engineers' value of 0.71 is 60.3% below this industry median. Based on the distribution chart, Rajoo Engineers ranks #268 out of 1277 companies in the Industrial Products industry, which is in the top quartile — a strong position relative to peers. Overall, Rajoo Engineers has a GF Score™ of 71/100 and is considered Possible Value Trap, reflecting its overall financial health beyond just this single metric.
How does Rajoo Engineers' PEG Ratio compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Rajoo Engineers ranks #268 out of 1277 companies for PEG Ratio. This places Rajoo Engineers in the top 21% of its industry — outperforming the majority of peers. The industry median PEG Ratio is 1.79. Rajoo Engineers' value of 0.71 is 60.3% below this benchmark. Historically, Rajoo Engineers' own PEG Ratio has ranged from 0.43 to 37.32 over the past decade. While the company's 10-year median is 2.73 vs. the industry median of 1.79, Rajoo Engineers has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for an Industrial Products company?
The median PEG Ratio among Industrial Products companies is 1.79, based on 1,277 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Rajoo Engineers's current PEG Ratio of 0.71 is 60.3% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Rajoo Engineers and its competitors. For the Industrial Products industry, the median PEG Ratio is 1.79 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Rajoo Engineers's current PEG Ratio is 0.71, which is 74% below median its own 10-year median of 2.73. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Rajoo Engineers stock overvalued right now?
Based on GuruFocus' analysis, Rajoo Engineers (BOM:522257) is currently considered Possible Value Trap. The stock's GF Value™ is ₹133.41, compared to a current price of ₹56.13 — trading 57.9% below its estimated fair value. The current PEG Ratio is 0.71, which is 74% below median its 10-year median of 2.73 and 60.3% below the Industrial Products industry median of 1.79. Rajoo Engineers' overall GF Score™ is 71/100 with 5 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For Rajoo Engineers (BOM:522257), the current PEG Ratio is 0.71 as of Jul. 23, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Rajoo Engineers (BOM:522257) Overvalued in 2026?
Based on GuruFocus' analysis, Rajoo Engineers stock appears to be undervalued.
The current stock price of ₹56.13 is trading 57.9% below its estimated GF Value™ of ₹133.41.
GuruFocus considers Rajoo Engineers to be Possible Value Trap.
Key valuation signals for BOM:522257:
PEG Ratio: 0.71 (74% below median its 10-year median of 2.73)
GF Value™: ₹133.41 vs. price of ₹56.13 (57.9% below fair value)
Industry Position: 60.3% below the Industrial Products median (#268 of 1277)
No single metric tells the full story. See the BOM:522257 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Rajoo Engineers Ltd manufactures and sells plastic processing machinery and post-extrusion equipment. The company's products and solutions include Monolayer Blown Film Lines, Downward Extrusion Blown Film Lines, Multilayer Blown Film Lines, PS/PE Foam Extrusion Lines, Thermoforming, PS Foam Vacuum Forming Machines, Twin Screw, Pipe Plant, Drip Irrigation Pipe Plant for Round, Flat Dripper, Lab Equipment, and others. The company products apply to flexible packaging, agriculture, infrastructure, automobiles, food and beverages, pharmaceuticals, stationery, printing, and others.
71GF Score
Get the complete analysis for BOM:522257
PEG Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
BOM:522257 has been successfully added to your 
