Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Rajoo EngineersBOM:522257 -0.55%71 5-Year Yield-on-Cost % is 0.30 as of Aug. 30, 2026, which is at its 10-year median of 0.30. GuruFocus rates BOM:522257 with a GF Score™ of 71/100 and a GF Value™ of ₹136.09 (Possible Value Trap). The stock has 5 warning signs investors should review. Among 1,883 Industrial Products companies, Rajoo Engineers ranks worse than 89.01% on this metric.
Rajoo Engineers's yield on cost for the quarter that ended in Jun. 2026 was 0.30.
The historical rank and industry rank for Rajoo Engineers's 5-Year Yield-on-Cost % or its related term are showing as below:
BOM:522257'
s 5-Year Yield-on-Cost % Range Over the Past 10 Years
Min: 0.03 Med: 0.3 Max: 3.29
Current: 0.3
During the past 13 years, Rajoo Engineers's highest Yield on Cost was 3.29. The lowest was 0.03. And the median was 0.30.
BOM:522257's 5-Year Yield-on-Cost % is ranked worse than 89.01% of 1883
companies
in the Industrial Products industry
Industry Median: 1.91
vs BOM:522257: 0.30
Of course the risk here is that the company may not raise its dividends as it did before. The key is to select the companies that can consistently raise its dividends. Usually companies with long history of raising dividends tend to do so.
Rajoo Engineers 5-Year Yield-on-Cost % Related Terms
BOM:522257 vs GEV, ETN, PH: 5-Year Yield-on-Cost % Comparison
For the Specialty Industrial Machinery subindustry, Rajoo Engineers's 5-Year Yield-on-Cost %, along with its competitors' market caps and 5-Year Yield-on-Cost % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Rajoo Engineers 5-Year Yield-on-Cost % vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Rajoo Engineers's 5-Year Yield-on-Cost % distribution charts can be found below:
* The bar in red indicates where Rajoo Engineers's 5-Year Yield-on-Cost % falls into.
Dividend Yield % and dividend growth of a stock is an important factor for income investors. But if company A raises its dividend constantly faster than company B, company A's future dividend yield might be much higher than Company B's even if their yields are the same now and their stock prices do not change.
Yield on Cost assumes that you buy and the stock today, and hold it for 5 years. If the company raises it dividends at the same rate as it did over the past 5 years, the dividends investors receive annually in 5 years relative to the stock price today.
Therefore, Yield-on-Cost of Rajoo Engineers is calculated as
Rajoo Engineers (BOM:522257) has a 5-Year Yield-on-Cost % of 0.30 as of Aug. 30, 2026. 5-Year Yield on Cost measures the expected yield based on a company's current yield and 5-year dividend growth. View historical data on Rajoo Engineers and its competitors. This is near median its historical median of 0.30. Over the past decade, Rajoo Engineers' 5-Year Yield-on-Cost % has ranged from 0.03 to 3.29. According to the industry distribution chart, Rajoo Engineers ranks #1676 out of 1883 companies in the Industrial Products industry, placing it in the top 89%.
Is Rajoo Engineers' 5-Year Yield-on-Cost % too high?
Rajoo Engineers' current 5-Year Yield-on-Cost % of 0.30 is near median its 10-year median of 0.30. Over the past 10 years, this metric has ranged from a low of 0.03 to a high of 3.29. The Industrial Products industry median 5-Year Yield-on-Cost % is 1.91. Rajoo Engineers' value of 0.30 is 84.3% below this industry median. Based on the distribution chart, Rajoo Engineers ranks #1676 out of 1883 companies in the Industrial Products industry, which is in the bottom quartile relative to peers. Overall, Rajoo Engineers has a GF Score™ of 71/100 and is considered Possible Value Trap, reflecting its overall financial health beyond just this single metric.
How does Rajoo Engineers' 5-Year Yield-on-Cost % compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Rajoo Engineers ranks #1676 out of 1883 companies for 5-Year Yield-on-Cost %. This places Rajoo Engineers in the lower half of its industry. The industry median 5-Year Yield-on-Cost % is 1.91. Rajoo Engineers' value of 0.30 is 84.3% below this benchmark. Historically, Rajoo Engineers' own 5-Year Yield-on-Cost % has ranged from 0.03 to 3.29 over the past decade. While the company's 10-year median is 0.30 vs. the industry median of 1.91, Rajoo Engineers has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good 5-Year Yield-on-Cost % for an Industrial Products company?
The median 5-Year Yield-on-Cost % among Industrial Products companies is 1.91, based on 1,883 companies in the industry. Companies in the top quartile (top 25%) have a 5-Year Yield-on-Cost % significantly above this median, while those in the bottom quartile fall well below. However, 5-Year Yield-on-Cost % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Rajoo Engineers's current 5-Year Yield-on-Cost % of 0.30 is 84.3% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high 5-Year Yield-on-Cost % mean?
A high 5-Year Yield-on-Cost % can signal that a stock is expensive relative to its fundamentals. 5-Year Yield on Cost measures the expected yield based on a company's current yield and 5-year dividend growth. View historical data on Rajoo Engineers and its competitors. For the Industrial Products industry, the median 5-Year Yield-on-Cost % is 1.91 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Rajoo Engineers's current 5-Year Yield-on-Cost % is 0.30, which is near median its own 10-year median of 0.30. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Rajoo Engineers stock overvalued right now?
Based on GuruFocus' analysis, Rajoo Engineers (BOM:522257) is currently considered Possible Value Trap. The stock's GF Value™ is ₹136.09, compared to a current price of ₹49.27 — trading 63.8% below its estimated fair value. The current 5-Year Yield-on-Cost % is 0.30, which is near median its 10-year median of 0.30 and 84.3% below the Industrial Products industry median of 1.91. Rajoo Engineers' overall GF Score™ is 71/100 with 5 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is 5-Year Yield-on-Cost % calculated?
5-Year Yield-on-Cost % is calculated from a company's financial statements. For Rajoo Engineers (BOM:522257), the current 5-Year Yield-on-Cost % is 0.30 as of Aug. 30, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Rajoo Engineers (BOM:522257) Overvalued in 2026?
Based on GuruFocus' analysis, Rajoo Engineers stock appears to be undervalued.
The current stock price of ₹49.27 is trading 63.8% below its estimated GF Value™ of ₹136.09.
GuruFocus considers Rajoo Engineers to be Possible Value Trap.
Key valuation signals for BOM:522257:
5-Year Yield-on-Cost %: 0.30 (near median its 10-year median of 0.30)
GF Value™: ₹136.09 vs. price of ₹49.27 (63.8% below fair value)
Industry Position: 84.3% below the Industrial Products median (#1676 of 1883)
No single metric tells the full story. See the BOM:522257 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Rajoo Engineers Ltd manufactures and sells plastic processing machinery and post-extrusion equipment. The company's products and solutions include Monolayer Blown Film Lines, Downward Extrusion Blown Film Lines, Multilayer Blown Film Lines, PS/PE Foam Extrusion Lines, Thermoforming, PS Foam Vacuum Forming Machines, Twin Screw, Pipe Plant, Drip Irrigation Pipe Plant for Round, Flat Dripper, Lab Equipment, and others. The company products apply to flexible packaging, agriculture, infrastructure, automobiles, food and beverages, pharmaceuticals, stationery, printing, and others.
71GF Score
Get the complete analysis for BOM:522257
5-Year Yield-on-Cost % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
BOM:522257 has been successfully added to your 
