Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
The historical rank and industry rank for Ratnaveer Precision Engineering's PEG Ratio or its related term are showing as below:
BOM:543978'
s PEG Ratio Range Over the Past 10 Years
Min: 0.26 Med: 0.39 Max: 0.51
Current: 0.26
During the past 7 years, Ratnaveer Precision Engineering's highest PEG Ratio was 0.51. The lowest was 0.26. And the median was 0.39.
BOM:543978's PEG Ratio is ranked better than 92.04% of 201
companies
in the Steel industry
Industry Median: 1.44
vs BOM:543978: 0.26
Peter Lynch thinks a company with a P/E ratio equal to its growth rate is fairly valued.
Ratnaveer Precision Engineering (BOM:543978) PEG Ratio Explanation
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
Ratnaveer Precision Engineering PEG Ratio Related Terms
Ratnaveer Precision Engineering PEG Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Steel subindustry, Ratnaveer Precision Engineering's PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Ratnaveer Precision Engineering PEG Ratio vs Steel Industry
For the Steel industry and Basic Materials sector, Ratnaveer Precision Engineering's PEG Ratio distribution charts can be found below:
* The bar in red indicates where Ratnaveer Precision Engineering's PEG Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
Ratnaveer Precision Engineering (BOM:543978) has a PEG Ratio of 0.26 as of Aug. 09, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Ratnaveer Precision Engineering and its competitors. This is 33% below median its historical median of 0.39. Over the past decade, Ratnaveer Precision Engineering's PEG Ratio has ranged from 0.26 to 0.51. According to the industry distribution chart, Ratnaveer Precision Engineering ranks #16 out of 201 companies in the Steel industry, placing it in the top 8%.
Is Ratnaveer Precision Engineering's PEG Ratio too high?
Ratnaveer Precision Engineering's current PEG Ratio of 0.26 is 33% below median its 10-year median of 0.39. Over the past 10 years, this metric has ranged from a low of 0.26 to a high of 0.51. The Steel industry median PEG Ratio is 1.44. Ratnaveer Precision Engineering's value of 0.26 is 81.9% below this industry median. Based on the distribution chart, Ratnaveer Precision Engineering ranks #16 out of 201 companies in the Steel industry, which is in the top quartile — a strong position relative to peers. Overall, Ratnaveer Precision Engineering has a GF Score™ of 65/100 and is considered Modestly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Ratnaveer Precision Engineering's PEG Ratio compare to NUE and STLD?
According to the Steel industry distribution chart, Ratnaveer Precision Engineering ranks #16 out of 201 companies for PEG Ratio. This places Ratnaveer Precision Engineering in the top 8% of its industry — outperforming the majority of peers. The industry median PEG Ratio is 1.44. Ratnaveer Precision Engineering's value of 0.26 is 81.9% below this benchmark. Historically, Ratnaveer Precision Engineering's own PEG Ratio has ranged from 0.26 to 0.51 over the past decade. While the company's 10-year median is 0.39 vs. the industry median of 1.44, Ratnaveer Precision Engineering has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for a Steel company?
The median PEG Ratio among Steel companies is 1.44, based on 201 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Ratnaveer Precision Engineering's current PEG Ratio of 0.26 is 81.9% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Ratnaveer Precision Engineering and its competitors. For the Steel industry, the median PEG Ratio is 1.44 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Ratnaveer Precision Engineering's current PEG Ratio is 0.26, which is 33% below median its own 10-year median of 0.39. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Ratnaveer Precision Engineering stock overvalued right now?
Based on GuruFocus' analysis, Ratnaveer Precision Engineering (BOM:543978) is currently considered Modestly Overvalued. The stock's GF Value™ is ₹180.23, compared to a current price of ₹205.85 — trading 14.2% above its estimated fair value. The current PEG Ratio is 0.26, which is 33% below median its 10-year median of 0.39 and 81.9% below the Steel industry median of 1.44. Ratnaveer Precision Engineering's overall GF Score™ is 65/100 with 6 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For Ratnaveer Precision Engineering (BOM:543978), the current PEG Ratio is 0.26 as of Aug. 09, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Ratnaveer Precision Engineering (BOM:543978) Overvalued in 2026?
Based on GuruFocus' analysis, Ratnaveer Precision Engineering stock appears to be overvalued.
The current stock price of ₹205.85 is trading 14.2% above its estimated GF Value™ of ₹180.23.
GuruFocus considers Ratnaveer Precision Engineering to be Modestly Overvalued.
Key valuation signals for BOM:543978:
PEG Ratio: 0.26 (33% below median its 10-year median of 0.39)
GF Value™: ₹180.23 vs. price of ₹205.85 (14.2% above fair value)
Industry Position: 81.9% below the Steel median (#16 of 201)
No single metric tells the full story. See the BOM:543978 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Ratnaveer Precision Engineering Ltd is a stainless steel (SS) product manufacturer focused on producing finished sheets, washers, solar roofing hooks, pipes and tubes. It manufactures finishing sheets, washers, and solar mounting hooks at Unit I and SS pipes & tubes at Unit II. Unit III and Unit IV are dedicated to the backward integration process where Unit III is the melting unit where the company melts steel scrap and turns it into steel ingots and Unit IV is the rolling unit where flat ingots are further processed to turn them into sheets which are the raw material for washers. Geographically, the company derives a majority of its revenue from its customers within India, and the rest from countries like Germany, Italy, Sweden, Austria, France, and others through exports.
65GF Score
Get the complete analysis for BOM:543978
PEG Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
BOM:543978 has been successfully added to your 
