Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
ROA % is calculated as Net Income divided by its average Total Assets over a certain period of time. Ratnaveer Precision Engineering's annualizedNet Income for the quarter that ended in Jun. 2026 was ₹729 Mil.
Ratnaveer Precision Engineering's average Total Assets over the quarter that ended in Jun. 2026 was ₹12,616 Mil. Therefore, Ratnaveer Precision Engineering's annualized ROA % for the quarter that ended in Jun. 2026 was 5.78%.
ROA % measures the rate of return on the total assets (shareholder equity plus liabilities). It measures a firm's efficiency at generating profits from shareholders' equity plus its liabilities. ROA % shows how well a company uses what it has to generate earnings. ROA %s can vary drastically across industries. Therefore, ROA % should not be used to compare companies in different industries. For retailers, a ROA % of higher than 5% is expected. For example, Wal-Mart (WMT) has a ROA % of about 8% as of 2012. For banks, ROA % is close to their interest spread. A banks ROA % is typically well under 2%.
Similar to ROE, ROA % is affected by profit margins and asset turnover. This can be seen from the Du Pont Formula:
Note:
The Net Income data used here is four times the quarterly (Jun. 2026) net income data. The Revenue data used here is four times the quarterly (Jun. 2026) revenue data.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Be Aware
Like ROE, ROA % is calculated with only 12 months data. Fluctuations in the company's earnings or business cycles can affect the ratio drastically. It is important to look at the ratio from a long term perspective. ROA % can be affected by events such as stock buyback or issuance, and by goodwill, a company's tax rate and its interest payment. ROA % may not reflect the true earning power of the assets. A more accurate measurement is ROC % (ROC).
Many analysts argue the higher return the better. Buffett states that really high ROA % may indicate vulnerability in the durability of the competitive advantage.
E.g. Raising $43b to take on KO is impossible, but $1.7b to take on Moody's is. Although Moody's ROA % and underlying economics is far superior to Coca Cola, the durability is far weaker because of lower entry cost.
Ratnaveer Precision Engineering ROA % Related Terms
Ratnaveer Precision Engineering ROA % Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Steel subindustry, Ratnaveer Precision Engineering's ROA %, along with its competitors' market caps and ROA % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Ratnaveer Precision Engineering ROA % vs Steel Industry
For the Steel industry and Basic Materials sector, Ratnaveer Precision Engineering's ROA % distribution charts can be found below:
* The bar in red indicates where Ratnaveer Precision Engineering's ROA % falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
In the calculation of annual ROA %, the net income of the last fiscal year and the average total assets over the fiscal year are used. In calculating the quarterly data,
the Net Income data used here is four times the quarterly (Jun. 2026) net income data.
ROA % is displayed in the 30-year financial page.
Ratnaveer Precision Engineering (BOM:543978) has a ROA % of 5.78% as of Jun. 2026. Return on assets is the ratio of current-period net income to average two-period total assets. View historical data on Ratnaveer Precision Engineering and its competitors. This is 10% below median its historical median of 6.41. Over the past decade, Ratnaveer Precision Engineering's ROA % has ranged from 2.19 to 7.42. According to the industry distribution chart, Ratnaveer Precision Engineering ranks #110 out of 634 companies in the Steel industry, placing it in the top 17.4%.
Is Ratnaveer Precision Engineering's ROA % too high?
Ratnaveer Precision Engineering's current ROA % of 5.78% is 10% below median its 10-year median of 6.41. Over the past 10 years, this metric has ranged from a low of 2.19 to a high of 7.42. The Steel industry median ROA % is 2.01. Ratnaveer Precision Engineering's value of 5.78% is 187.6% above this industry median. Based on the distribution chart, Ratnaveer Precision Engineering ranks #110 out of 634 companies in the Steel industry, which is in the top quartile — a strong position relative to peers. Overall, Ratnaveer Precision Engineering has a GF Score™ of 67/100 and is considered Modestly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Ratnaveer Precision Engineering's ROA % compare to NUE and STLD?
According to the Steel industry distribution chart, Ratnaveer Precision Engineering ranks #110 out of 634 companies for ROA %. This places Ratnaveer Precision Engineering in the top 17% of its industry — outperforming the majority of peers. The industry median ROA % is 2.01. Ratnaveer Precision Engineering's value of 5.78% is 187.6% above this benchmark. Historically, Ratnaveer Precision Engineering's own ROA % has ranged from 2.19 to 7.42 over the past decade. While the company's 10-year median is 6.41 vs. the industry median of 2.01, Ratnaveer Precision Engineering has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good ROA % for a Steel company?
The median ROA % among Steel companies is 2.01, based on 634 companies in the industry. Companies in the top quartile (top 25%) have a ROA % significantly above this median, while those in the bottom quartile fall well below. However, ROA % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Ratnaveer Precision Engineering's current ROA % of 5.78% is 187.6% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high ROA % mean?
A high ROA % can signal that a stock is expensive relative to its fundamentals. Return on assets is the ratio of current-period net income to average two-period total assets. View historical data on Ratnaveer Precision Engineering and its competitors. For the Steel industry, the median ROA % is 2.01 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Ratnaveer Precision Engineering's current ROA % is 5.78%, which is 10% below median its own 10-year median of 6.41. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Ratnaveer Precision Engineering stock overvalued right now?
Based on GuruFocus' analysis, Ratnaveer Precision Engineering (BOM:543978) is currently considered Modestly Overvalued. The stock's GF Value™ is ₹180.23, compared to a current price of ₹205.85 — trading 14.2% above its estimated fair value. The current ROA % is 5.78%, which is 10% below median its 10-year median of 6.41 and 187.6% above the Steel industry median of 2.01. Ratnaveer Precision Engineering's overall GF Score™ is 67/100 with 6 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is ROA % calculated?
ROA % is calculated from a company's financial statements. For Ratnaveer Precision Engineering (BOM:543978), the current ROA % is 5.78% as of Jun. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Ratnaveer Precision Engineering (BOM:543978) Overvalued in 2026?
Based on GuruFocus' analysis, Ratnaveer Precision Engineering stock appears to be overvalued.
The current stock price of ₹205.85 is trading 14.2% above its estimated GF Value™ of ₹180.23.
GuruFocus considers Ratnaveer Precision Engineering to be Modestly Overvalued.
Key valuation signals for BOM:543978:
ROA %: 5.78% (10% below median its 10-year median of 6.41)
GF Value™: ₹180.23 vs. price of ₹205.85 (14.2% above fair value)
Industry Position: 187.6% above the Steel median (#110 of 634)
No single metric tells the full story. See the BOM:543978 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Ratnaveer Precision Engineering Ltd is a stainless steel (SS) product manufacturer focused on producing finished sheets, washers, solar roofing hooks, pipes and tubes. It manufactures finishing sheets, washers, and solar mounting hooks at Unit I and SS pipes & tubes at Unit II. Unit III and Unit IV are dedicated to the backward integration process where Unit III is the melting unit where the company melts steel scrap and turns it into steel ingots and Unit IV is the rolling unit where flat ingots are further processed to turn them into sheets which are the raw material for washers. Geographically, the company derives a majority of its revenue from its customers within India, and the rest from countries like Germany, Italy, Sweden, Austria, France, and others through exports.
67GF Score
Get the complete analysis for BOM:543978
ROA % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
BOM:543978 has been successfully added to your 
