* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
FRA:S08's PEG Ratio is ranked better than 91.5% of 200
companies
in the Steel industry
Industry Median: 1.445
vs FRA:S08: 0.26
Peter Lynch thinks a company with a P/E ratio equal to its growth rate is fairly valued.
PT Steel Pipe Industry of Indonesia Tbk (FRA:S08) PEG Ratio Explanation
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
PT Steel Pipe Industry of Indonesia Tbk PEG Ratio Related Terms
PT Steel Pipe Industry of Indonesia Tbk PEG Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
PT Steel Pipe Industry of Indonesia Tbk PEG Ratio Chart
PT Steel Pipe Industry of Indonesia Tbk Annual Data
For the Steel subindustry, PT Steel Pipe Industry of Indonesia Tbk's PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
PT Steel Pipe Industry of Indonesia Tbk PEG Ratio vs Steel Industry
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
PT Steel Pipe Industry of Indonesia Tbk (FRA:S08) has a PEG Ratio of 0.18 as of Jul. 06, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on PT Steel Pipe Industry of Indonesia Tbk and its competitors. This is 18% below median its historical median of 0.22. Over the past decade, PT Steel Pipe Industry of Indonesia Tbk's PEG Ratio has ranged from 0.16 to 12.82. According to the industry distribution chart, PT Steel Pipe Industry of Indonesia Tbk ranks #17 out of 200 companies in the Steel industry, placing it in the top 8.5%.
Is PT Steel Pipe Industry of Indonesia Tbk's PEG Ratio too high?
PT Steel Pipe Industry of Indonesia Tbk's current PEG Ratio of 0.18 is 18% below median its 10-year median of 0.22. Over the past 10 years, this metric has ranged from a low of 0.16 to a high of 12.82. The Steel industry median PEG Ratio is 1.45. PT Steel Pipe Industry of Indonesia Tbk's value of 0.18 is 87.5% below this industry median. Based on the distribution chart, PT Steel Pipe Industry of Indonesia Tbk ranks #17 out of 200 companies in the Steel industry, which is in the top quartile — a strong position relative to peers. Overall, PT Steel Pipe Industry of Indonesia Tbk has a GF Score™ of 76/100, reflecting its overall financial health beyond just this single metric.
How does PT Steel Pipe Industry of Indonesia Tbk's PEG Ratio compare to NUE and STLD?
According to the Steel industry distribution chart, PT Steel Pipe Industry of Indonesia Tbk ranks #17 out of 200 companies for PEG Ratio. This places PT Steel Pipe Industry of Indonesia Tbk in the top 9% of its industry — outperforming the majority of peers. The industry median PEG Ratio is 1.45. PT Steel Pipe Industry of Indonesia Tbk's value of 0.18 is 87.5% below this benchmark. Historically, PT Steel Pipe Industry of Indonesia Tbk's own PEG Ratio has ranged from 0.16 to 12.82 over the past decade. While the company's 10-year median is 0.22 vs. the industry median of 1.45, PT Steel Pipe Industry of Indonesia Tbk has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for a Steel company?
The median PEG Ratio among Steel companies is 1.45, based on 200 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. PT Steel Pipe Industry of Indonesia Tbk's current PEG Ratio of 0.18 is 87.5% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on PT Steel Pipe Industry of Indonesia Tbk and its competitors. For the Steel industry, the median PEG Ratio is 1.45 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. PT Steel Pipe Industry of Indonesia Tbk's current PEG Ratio is 0.18, which is 18% below median its own 10-year median of 0.22. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is PT Steel Pipe Industry of Indonesia Tbk stock overvalued right now?
PT Steel Pipe Industry of Indonesia Tbk (FRA:S08) has a current PEG Ratio of 0.18. The stock's GF Value™ is €0.01, compared to a current price of €0.01 — trading 40% above its estimated fair value. The current PEG Ratio is 0.18, which is 18% below median its 10-year median of 0.22 and 87.5% below the Steel industry median of 1.45. PT Steel Pipe Industry of Indonesia Tbk's overall GF Score™ is 76/100 with 2 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For PT Steel Pipe Industry of Indonesia Tbk (FRA:S08), the current PEG Ratio is 0.18 as of Jul. 06, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is PT Steel Pipe Industry of Indonesia Tbk (FRA:S08) Overvalued in 2026?
Based on GuruFocus' analysis, PT Steel Pipe Industry of Indonesia Tbk stock appears to be overvalued.
The current stock price of €0.01 is trading 40% above its estimated GF Value™ of €0.01.
Key valuation signals for FRA:S08:
PEG Ratio: 0.18 (18% below median its 10-year median of 0.22)
GF Value™: €0.01 vs. price of €0.01 (40% above fair value)
Industry Position: 87.5% below the Steel median (#17 of 200)
No single metric tells the full story. See the FRA:S08 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
PT Steel Pipe Industry of Indonesia Tbk Business Description
PT Steel Pipe Industry of Indonesia Tbk is an Indonesian-based company engaged in manufacturing steel pipes. The company's products include black pipes, water pipes, mechanical pipes, furniture pipes, API pipes, steel poles, spiral pipes, as well as industrial and ornamental stainless steel pipes. The segments of the company are Steel Pipe Mill, Spiral Steel Pipe Mill, Strips and Plate, Services, and others. The company's products are used for furniture, water supply systems, general construction, automotive components, oil and gas, mechanical structures, and chemical industries. Geographically, all operations functioned through the regions of Indonesia.
76GF Score
Get the complete analysis for FRA:S08
PEG Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
FRA:S08 has been successfully added to your 
